A reliable, high quality performer with all the essential cassette deck features. The front-load design gives convenient access to all controls, and easy cassette viewing. Makes top-quality recordings from line level sources, or :live" with microphones.
Features:
DC Motor
This high-torque, Sanyo made motor is engineered for accuracy and long life providing a reliable, stable drive source for the rugged single capstan tape transport. Wow and flutter are held to inaudible levels.
Mechanical Tape Tension Servo
Automatically maintains steady tape "holdback tension to smooth load fluctuations on drive system and greatly reduces wow and flutter. Helps insure pure clean sound.
Record/Playback Head
Hard permalloy composition delivesr flat frequency response (to 16 kHz) and extended head life using any tape formulation
Illuminated VU Meters
Give a clear accurate picture of left and right channel recording levels for optimum recording quality without distortion
Dolby Noise Reduction
Virtually eliminates tape hiss, improving signal to noise performance by up to 10 dB in the critical treble region of the audio spectrum.
Separate EQ and Bias
Allows selection of accurate equalization and bias settings for optimum recording results with any tapes
Digital Tape Counter with Reset
Makes it easy index tapes and find any desired selection quickly
Full Auto-Stop Mechanism
Disengages automatically at either end of tape in any mode to prevent unnecessary tape and mechanism wear, eliminating the need to rush to shut the machine off.
Soft Eject
Air-damped cassette door glides open smoothly and quietly with the touch of "Eject"
Specifications
Tape: cr02, Fe-Cr and Normal tape
Recoding System: AC bias, 1/4 track stereo
Erasing System: AC erasing, 1/2 track
Tape Speed: 4,75 cm/sec (1-7/8 ips)
Rewind and Fast Forward Time: 90 sec. C-60 cassette tape
Wow and Flutter: 0,08% WRMS
Frequency Response
CrO₂ Tape : 30 - 16,000 Hz
Fe-Cr Tape : 30 - 16,000 Hz
Standard Tape : 30 - 13,000 Hz
Signal-to-Noise Ratio
Dolby On : 62 dB
Dolby Off : 54 dB
Input Sensitivity
Mic : 0,3 mV / 10 k Ω
Rec/Play : 1 mV/ 10 k Ω
Line In : 50 mV / 50 k Ω
Output Level
Line Out : 0,6 mV / 3 k Ω
Headphones : 30 mV / 8 Ω to 10 k Ω
Power Requirements: AC 120 V 60 Hz
Dimensions (W x H x D): 420 x 286 x 132 mm (16-9/16" x 11-5/16" x 5-3/16")
Weight: 4,8 kg (10 lbs 9 oz)
No comments:
Post a Comment