Pagine

Superscope CD-302A cassette deck

Stereo cassette tape deck, features:

Built-in Dolby Noise Reduction System - with internal/external switching that enables it to operate as an independent out board playback Dolby system. Unlike most other Dolbyized units, the CD-302A Deck can also deprocess Dolbyized material from FM broadcasts and other tape recorders.

Automatic Shut-Off - that disengages the cassette drive mechanism at end-of-tape in record and play modes.

 

 

Recording Peak Limiter - that monitors and holds the recording level below saturation to prevent distortion while maintaining a full dynamic range.

Tape Select Switch - for proper bias and equalization when using either standard or chromium dioxide tape.

Mechanical Locking Pause Control - that enables you to pause during playback or recording without disengaging controls

VU Meters, Function Indicators and Cassette Compartment - that are illuminated for easy viewing

3-Digit tape Counter - with a reset button.

Walnut-Grained cabinetry - and the professional styling you'd expect to find only in more expensive units.

 


Specifications

Tape Speed:  4,8 cm/sec. (1-7/8 ips)

Reel Size:  compact cassette

Recording System:  Quarter-Track Stereo

Rewind and Fast Forward Time:  85 sec. C-60 cassette

Frequency Response

Standard Tape :  40 - 10,000 Hz

Chromium Dioxide Tape :  40 - 14,000 Hz

Signal-to-Noise Ratio

Standard Tape :  48 dB

Chromium Dioxide Tape :  51 dB

Bias Frequency:  85 kHz

Type of Level Indication:  Two VU Meters

Head Configuration

1 half-Track Erase

1 Quarter-Track Record/Playback

Wow and Flutter:  0,2% at 4,8 cm/sec. (1-7/8 ips)

Type of Motor:  One DC Electrical Governor Controlled

Semiconductors:  30 Transistors; 21 Diodes; 2 FET's

Inputs Sensitivity/Impedance:

Two Auxiliary (one for each channel Plug type Phono):  60 mV/180 k

Two Microphone (one for each channel, Plug type Mini):  -72db/ low impedance

Outputs Level/Impedance:

Two Line (one for each channel, Plug type Phono):  0,775 V (at 0 VU) / 6 k

One Stereo Headphone (Plug type Phono):  44 mV/8

One DIN Connector (Rec/Play)

Input Sensitivity/Impedance :  12 mV/47 k

Output Level/Impedance :  0,775 V (at 0 VU) / 6 k

Power Requirements:  110/220/240 Volts AC 50/60 Hz

Power Consumption:  11 Watts

Dimensions (W x H x D):  318 x 83 x 225 mm (12-1/2" x 3-1/4" x 8-7/8")

Weight:  2,7 kg (6 lbs)


 

Nessun commento:

Posta un commento