Stereo cassette tape deck, features:
Built-in Dolby Noise Reduction System - with internal/external switching that enables it to operate as an independent out board playback Dolby system. Unlike most other Dolbyized units, the CD-302A Deck can also deprocess Dolbyized material from FM broadcasts and other tape recorders.
Automatic Shut-Off - that disengages the cassette drive mechanism at end-of-tape in record and play modes.
Recording Peak Limiter - that monitors and holds the recording level below saturation to prevent distortion while maintaining a full dynamic range.
Tape Select Switch - for proper bias and equalization when using either standard or chromium dioxide tape.
Mechanical Locking Pause Control - that enables you to pause during playback or recording without disengaging controls
VU Meters, Function Indicators and Cassette Compartment - that are illuminated for easy viewing
3-Digit tape Counter - with a reset button.
Walnut-Grained cabinetry - and the professional styling you'd expect to find only in more expensive units.
Specifications
Tape Speed: 4,8 cm/sec. (1-7/8 ips)
Reel Size: compact cassette
Recording System: Quarter-Track Stereo
Rewind and Fast Forward Time: 85 sec. C-60 cassette
Frequency Response
Standard Tape : 40 - 10,000 Hz
Chromium Dioxide Tape : 40 - 14,000 Hz
Signal-to-Noise Ratio
Standard Tape : 48 dB
Chromium Dioxide Tape : 51 dB
Bias Frequency: 85 kHz
Type of Level Indication: Two VU Meters
Head Configuration
1 half-Track Erase
1 Quarter-Track Record/Playback
Wow and Flutter: 0,2% at 4,8 cm/sec. (1-7/8 ips)
Type of Motor: One DC Electrical Governor Controlled
Semiconductors: 30 Transistors; 21 Diodes; 2 FET's
Inputs Sensitivity/Impedance:
Two Auxiliary (one for each channel Plug type Phono): 60 mV/180 k Ω
Two Microphone (one for each channel, Plug type Mini): -72db/ low impedance
Outputs Level/Impedance:
Two Line (one for each channel, Plug type Phono): 0,775 V (at 0 VU) / 6 k Ω
One Stereo Headphone (Plug type Phono): 44 mV/8 Ω
One DIN Connector (Rec/Play)
Input Sensitivity/Impedance : 12 mV/47 k Ω
Output Level/Impedance : 0,775 V (at 0 VU) / 6 k Ω
Power Requirements: 110/220/240 Volts AC 50/60 Hz
Power Consumption: 11 Watts
Dimensions (W x H x D): 318 x 83 x 225 mm (12-1/2" x 3-1/4" x 8-7/8")
Weight: 2,7 kg (6 lbs)
No comments:
Post a Comment