Amplifier Section
Power Output: 38 watts per channel (min. RMS, at 8 Ω, both
channels driven, from 20 - 20,000 Hz, with no more than 0,08% T.H.D.)
Music Power Output
(DIN):
2 x 80 watts at 4 Ω
(1 kHz)
2 x 53 watts at 8 Ω
(1 kHz)
Continuous Power
Output (DIN):
2 x 50 watts at 4 Ω
(1 kHz)
2 x 40 watts at 8 Ω
91 kHz)
Total Harmonic
Distortion: 0,08% at rated power ( 0,08%
at 1 watt output)
IM Distortion: 0,08% at rated power ( 0,08% at 1 watt
output)
Damping Factor: 35 at 8 Ω
Frequency Response
: 20 - 30,000 Hz ±1 dB
RIAA deviation: 20 - 20,000 Hz ±0,8 dB
Sensitivity/Impedance:
Phono : 2,5 mV/50 k Ω
Tape Play : 150 mV/50 k Ω
Tape rec : 150 mV/3,5 k Ω
Phono Overload: 180 mV RMS at 1 kHz (0,08%T.H.D.)
Signal-to-Noise
ratio:
Phono : 85 dB (at 10 mV input, A weighted); 75 dB (IHF)
Tape : 95 dB (A weighted); 80 dB (IHF)
Tone Controls
Bass : ±8 dB at 100 Hz
Treble : ±8 dB at 10 kHz
Loudness (volume at
-30 dB): +7 dB at 70 Hz; +5 dB at 10 kHz
FM Tuner Section
Tuning Range: 87,5 - 108,0 MHz (50 kHz steps)
Usable Sensitivity:
Mono : 12,8 dBf (1,2 µV)
Stereo : 18,0 dBf (2,2 µV)
50 dB Quieting
Sensitivity:
Mono : 18,0 dBf (2,2 µV)
Stereo : 37,2 dBf 920 µV)
Capture Ratio: 1,5 dB
Image rejection
ratio: 85 dB
IF Rejection
ratio: 90 dB
Signal-to-Noise
ratio:
Mono : 71 dB
Stereo : 66 dB
Selectivity: 50 dB DIN (±300 kHz, 40 kHz dev.)
AM Suppression
Ratio: 50 dB
Harmonic Distortion:
Mono : 0,15%
Stereo : 0,3%
Frequency
Response: 30 - 15,000 Hz ±1,5 dB
Stereo
Separation: 40 dB at 1 kHz; 30 dB at 100 - 10,000 Hz
Muting level : 17,2
dBf (4,0 µV)
Stereo
Threshold: 17,2 dBf (4,0 µV)
AM Tuner Section
Tuning Range: 522 - 1,611 kHz (9 kHz steps)
Usable
Sensitivity: 30 µV
Image Rejection
Ratio: 40 dB
IF Rejection
Ratio: 30 dB
Signal-to-Noise
Ratio: 40 dB
Harmonic
Distortion: 0,8%
General
Semiconductors: 34 Transistors; 81 Diodes;
10 ICs; 6 FETs
Power Supply: Ac 220 - 240 V 50/60 Hz
Dimensions (W x H x
D): 418 x 112 x 340 mm (16-1/2" x
4-1/2" x 13-3/8")
Weight: 7,1 kg 915,6 lbs)
No comments:
Post a Comment