Dokorder 8090A cassette deck

Complete your stereo system with a superb 4-trackk cassette tape deck to match the Dokorder Dub-A-Tape system or other fine stereo systems.

This highly functional solid state model perform in a manner that completely belies the price - considerably below that of other high quality units.

Redesigned to add even greater utilization to its known high performance, this model meets you face to face for vertical stacking in the Dokorder Dub-A-tape stereo system, or it may be wall-mounted. All controls are on the face, including the cassette compartment. A touch of the Stop/Eject button halts the tape, while full depression snaps open the cassette compartment for partial ejection - to protect it from dropping - yet handy for removal.

All controls are before you for instant use. In logical sequence you have the five push-buttons - Stop, Play, fast-Forward, Rewind and Record. To prevent accidental erasures both Play and Record must be pushed simultaneously. At hand are twin volume controls (left one pushes in for on-off) which control both recording and playback levels.

Separate VU meters (one for each channel) operate in both record and playback modes and are lighted when power is on. The face panel provides two convenient jacks, a Mic  jack with an impedance of 10 k Ω  and a headset jack with a 10 - 20 k Ω  impedance.

Quality engineering includes 22 carefully selected transistors and diodes for a wide 40 to 7,5000 Hz in frequency response. A built-in pre-amplifier enables you to monitor any program being recorded.

Dokorder 8080A 8-track player

An exciting 8-track stereo cartridge player for powerful reproduction of all popular 8-track cartridge tapes

This attractive Dokorder component has been designed and built to deliver rich stereo performance from popular 8-track stereo cartridges thoughout a wide 40 to 8,5000 Hz frequency response range.

Because its usage has been limited to playing tapes by design, the 8080A is a very specialized component. All of its ten transistors and diodes, as well as every other internal engineering feature, have been concentrated to ensure an accurate, unwavering speed of 3-3/4 ips, greater channel separation and a better Signal-to-Noise Ratio. The result is richer, more professional stereo reproduction. The attractive 8080A is also easy and convenient to operate.

A single push button selector allows the operator to choose any one of four programs in a cartridge, while four easy-to-see indicator lamps allow him to see the program being played. An Auto/Repeat switch enables the 8080A play all four programs consecutively, or to continue repeating any single program until stopped by the operator.

A spring door over the entrance of the cartridge compartment moves up when a cartridge is inserted, but flips down when a cartridge is removed to keep the playing heads free of dust and other foreign elements.

Designed and color coordinated to form an intrinsic part of the Dekoder Dub-A-Tape stereo system, the 8080A offers top stereo cartridge performance in any quality stereo system.

Dokorder 8060A amplifier

A completely new 100 watt stereo control amplifier - the heart of a new approach to stereo system

There are two ways to look at the sensational Dokorder 8060A solid state control amplifier as a powerful foundation for any existing stereo system or as the heart of Dokorder's new and completely integrated Dub-A-Tape series of stereo components.

Any way you look at the Dokorder 8060A has the credentials and ability to do the job better than any comparably sized and priced amplifier you can buy. Its all solid state circuitry, complete with a pair of sophisticated integrated Circuits IC, offers a full 100 watts in power output a wide power bandwidth from 15 to 50,000 Hz and an extremely low distortion figure of only 0,5% at rated output.

This performance is complemented by no fewer than 6 outputs and 4 inputs, a two-speaker system selector, special circuitry for power transistor protection and easy-to-use controls, including the latest sliding graphic type for volume.

Every bit indicative of the 8060's careful internal engineering is its handsome and functional styling. Any control that isn't absolutely essential has a clean, refined appearance which makes it a standout in any multi-component system, as well as an intricate part of Dokorder's handsome black paneled and rationally designed Dub-A--Tape series of stereo components.

Dokorder 7100

 The 7100 represents a milestone in tape sophistication at a popular price. A glance at the deck's specifications will attest to the 7100's excellence of performance. And a review of the various warranties exhibit Dokorder's confidence in its reliability. If service should be required in future years, you will soon appreciate the ease of maintanance. All electronic circuits are modular and repair is quickly accomplished by complete replacement of electronic circuit modules, saving you time and expense.

 Features:

MBD Heads

Electronic Tape Transport Control

Three precision Motors

Tape/Source Monitoring

Adjustable Tape Equalizer

"Live" Editing

Special Electronic Effects

Automatic Shutoff

Four-Channel Playback Conversion

New, Easy-Load tape Design

Specifications

Tape Transport:  Three motor (Hysteresis synchronous capstan and eddy current induction reel) mechanical speed change solenoid operated.

Tape Speeds: 7½ IPS and 3¾ IPS

Monitoring:  Full tape/source monitoring

Tape Heads:  Three stereo channel separate heads (E, R and P)

Equalization:  NAB

Frequency Response: 

at 7½ ips: 25 Hz - 25 kHz (±3 dB, 30 Hz - 23 kHz)

at 3¾ ips: 30 Hz - 18 kHz (±3 dB, 30 Hz - 13 kHz)

Signal-to Noise Ratio:  Better than 58 dB IPS

Crosstalk:  Better than 60 dB

Wow and Flutter: 

at 7½ ips: 0,08% IPS

at 3¾ ips: 0,12% IPS

Stereo Channel Separation:  Better than 55 dB at 1 kHz

Bias Frequency:  130 kHz

Inputs Per Channel: 

MIC : 0,8 mV/10 kΩ

LINE : 80 mV/100 kΩ

DIN (Rec) : 3,3 kΩ

Outputs per Channel:

LINE : 0 dB (0,775 V)/10 kΩ

DIN (Pb) : 0 dB/10 kΩ

Headphone : 5 mW/8 Ω

Circuit Complements:  21 transistors, 41 diodes

Fast Winding Time:  96 seconds (1800-foot/60 Hz)

Reel Size:  7" and 5"

Operating Position:  Vertical

Power Requirements:  AC 112 V, 60 Hz

Power Consumptions:  120 W

Dimensions:  16-7/8" x 17-3/4" x 6-3/4" (W x H x D)

Weight:  40 lbs (net)

Dokorder Model 8140

Versatile 2-channel/4-channel record and play deck with multi-sync record function.

Multi-track recording at a moderate price.

That's the 8140. Four channel or two channel recording or playback, overdub, quadraphonic,sound-on-sound, echo, ... everything you need to help translate what you feet into what others will feel.

All for a lot less money than you think.

Features:

4-track,Multi-sync Recording

Molybdenum Heads with orginal owner Lifetime Guarantee

Three motor Solenoid-Controlled Transport

Adjustable Tape Equalization

Switchable Tape/Source Monitoring

Instantaneous Pause with Looking Feature

Separate Input/Output Controls

MIC/LINE Mixing

large, Illuminated meters

Electronic Echo and Sound-on-Sound

Specifications

Recording System: 4-track, 4/2 channel stereo/mono rec. & play

Tape Speeds: 7-1/2ips, 3-3/4 ips

Reel Capacity: 7" (5'' minimum)

Rec/P.B. Frequency Response:

at 7½ ips: 25 Hz - 26 kHz (±3 dB, 30 Hz - 23 kHz)

at 3¾ ips: 30 Hz - 18 kHz (±3 dB, 30 Hz - 13 kHz)

Signal-to Noise Ratio: Better than 58 dB (WRMS)

Crosstalk: Better than 55 dB

Wow and Flutter:

at 7½ ips: 0,07% (WRMS)

at 3¾ ips: 0,10% (WRMS)

Equalization: NAB

Bias Frequency: 130,000 Hz

Input Sensitivity/Impedance per Channel :

MIC: 0,8mv/10 kΩ

Line: 80 mV/20 kΩ

DIN: 8 mV

Output Sensitivity/Impedance per Channel:

Line: 0 dB/10 kΩ

DIN: 0,775 V/10 kΩ

Headphones: 5 mW/8 Ω

Recording Time (1800-foot tape, 60 Hz):

4-track, 4/2 channel stereo: 90' at 7½ ips. or 270' at 3¾ ips.

4-track, mono: 270' at 7½ ips or 540' at 3¾ ips

Fast Forward/Rewind Time: within 120 sec.

Heads: Four (2 erase, 1 record, 1 play)

Motors: Three (one 4/8-pole hysteresis synchronous for capstan, two 6-pole induction type for reels)

Circuit Complementi: 43 transistors, 71 diodes

Power Requirement: 100/117/125/200/220 or 240 V, 50/60 Hz

Dimensions (W x H x D): 16-7/8" x 17-3/4" x 6-3/4"

Weight: 41,9 lbs