EISA 2012-2013 Audiolab M-DAC

European D/AConventer 2012 - 2013:  Audiolab M-DAC

 The new age of USB computer audio has rekindled the flame of the outboard D/A converter (DAC). Among this new breed of USB DACs few are as simple to implement or as versatile in use as Audiolab’s fabulous little M-DAC. It works directly with virtually all PCs and Macs without special USB drivers while its bold display shows a wealth of information about the incoming music data. An onboard volume control lets the M-DAC do the job of a preamp just as the choice of seven digital filters allows fine-tuning of its sound. And what a sound – powerful, insightful and delicate, it cuts to the heart of the music while remaining faithful to its soul. This is a very high performance product that’s perfect for both the computer audio novice and seasoned enthusiast alike.

Specification

Model:  M-DAC

General description:  Digital-to-analogue converter

DAC:  ESS Sabre32 9018 chip

Resolution:  32 bits

Maximum Sampling Frequency:  84.672MHz

Digital input:  2 x 24-bit/192kHz coaxial ,2 x 24-bit/96kHz Toslink optical, 1 x 24-bit/96kHz USB

Digital output:  1 x coaxial, 1x Toslink optical

Output voltage:  RCA: 2.25V RMS,XLR: 4.5V RMS

Total Harmonic Distortion:  RCA: <0 .002=".002" p="p" xlr:="xlr:">

Frequency response:  20Hz - 20kHz (± 0.2dB)

Dynamic range:  RCA: >115dB;XLR: >122dB

Crosstalk:  RCA: <-120dB;  XLR: <-130dB

Power requirements:  220--230V /100-120V (50 ~ 60Hz)

Dimensions (H x W x D):  59 x 250 x252mm

Colour:   Black, Silver

Audiolab 8000M Mono Power Amplifier

The Audiolab 8000M Monobloc Power Amplifier delivers truly refined sound with real power and drive. It copes naturally with the most delicate nuances through to the full power of a symphony orchestra or rock-band. Many of today's loudspeakers are designed to be bi-wired, that also means they can be operated with a separate power amplifier connected to each speaker section e.g. HF and LF. With over 125 watts output this compact and versatile design is ideal for any system requiring two, four or even more power amplifiers.

Each 8000M has two sets of speaker output terminals for bi-wiring.

Parallet in-out phono connectors make it easy to connect several pairs of 8000M's in either a dedicated audio system or a top-line multi-amp AV system. A comprehensive user manual includes full instructions for the connection of bi-wired and tri-wired speakers.

Features:

125 watt monobloc power amplifier

Two sets heavy duty speaker terminals

Line level in-out phono connectors

Compact design with high efficiency heatsink

DC servo feedback

Specification

Power Output: 125 Watts per channel into 8 ohm

Input Impedance: 47 Kohm

Gain: 29 dB (at 1 kHz)

Signal To Noise: >96 dB

Frequency response: 20 Hz - 20 kHz (± 0.3dB)

Total Harmonic Distortion: <0.05%

Dimensions (WxHxD): 445 x 74 x 337 mm

Audiolab 8000P Power amplifier

Audiolab 8000P

Stereo Power Amplifier

The Audiolab 8000P Stereo Power Amplifier delivers over 100 watts per channel. peak output current of over 40 amps and exceptionally low distortion guarantees perfect operation with all types of loudspeakers and cables. aTwo sets of heavy duty speaker terminals allow for connection of bi-wired speakers. Input loud sockets make it easy to connect additional power amplifiers for bi-amplified systems. The dual-mono configuration of the 8000P ensures exceptional isolation between channels.

If you already own an Audiolab 8000A Integrated Amplifier you can upgrade by adding the 8000P.

Specifications :

Rated output power: 100 W per channel into rated load impedance (8 ohm), 150 W into 4 ohm

Typical output power: 120 W per channel into rated load impedance (8 ohm), 180 W into 4 ohm

Input for full rated power: 1.0 V rms

Input impedance: 47 kohm nominal

Gain: 29.0 dB at 1 kHz

Signal to noise: Greater than 95 dB (relative to 0 dBW)

Frequency response: (-3 dB) 0.1 Hz - 75 kHz

Frequency response: (±0.3dB) 20 Hz - 20 kHz

Total harmonic distortion & noise: Less than 0.05%

Dimensions (W x D x H): 445 x 337 x 74 mm

Weight: 9 kg

Audiolab 8000C Pre-amplifier

The Audiolab 8000C pre-amplifier is a highly versatile control pre-amplifier..It offers the flexibility of tone controls, built in class A headphone amplifier and loe output impedence line amplifier. It has inputs for CD, phono, tuner, video, tape 1 and tape 2. The phono inputs match all types of modern Moving Coil and Moving Magnes cartridges. The low output impedance line amplifier is a miniature class A power amplifier with current mirror bias. Perfect for long cables and multiple power amplifiers That is especially important if you want to place your power amplifiers (e.g. 8000M's) close to the loudspeakers.

Specifications :

Input Sensitivity and Impedance: Phono MM 2.0 mV/100 ohm/85 pF,

Phono MC 110 µV/100 ohm/13.3 nF,

CD, Video, Tuner, Tape 1 & 2: 100 mV/20 k ohm

Phono Overload (IHF): Phono MM 30dB rel 5.0mV, maximum input 175mv

Phono MC 25dB rel 0.5mV, maximum input (1kHz) 10mv @1kHz

Signal to Noise(IHFA rel 0.5v output): Phono MM 81dB, Phono MC 77dB, Video / Tuner / Tape 1 & 2 92dB

Frequency Response: Phono MM and Phono MC (RIAA) 20Hz to 20kHz ± 0.5dB

Tone Control Range: Bass: ± 6dB at 20Hz, Treble: ± 6DB @20kHz

Total Harmonic Distorion & Noise: Less than 0.01% any frequency 20Hz to 20 kHz

Channel Balance: Within 1dB

Channel Separation: Better than 60dB @ 1kHz

Polarity (Phase): Non inverting for all inputs

Pre Amp Output: OUTPUT 1 and OUTPUT 2. Level 707 mV.

Output impedance 100 ohm. Maximum output >7.76 V RMS.

Headphone Output: Maximum output 7.76 V RMS. Output impedance 100 ohm.

Suitable for headphones 8 ohm to 2 kohm impedance.

Headphones operate when OUTPUT is switched OFF.

Record Output: TAPE 1, TAPE 2, VIDEO 100 mV.

Output impedance: 1000 ohm, 1600 ohm with phono source.

Output: Switches pre-amp outputs off.

Attenuation is >60 dB. Muting is controlled automatically.

Operating Temperature Range: 10 ~ 30° C

Dimensions (w x d x h): 445 x 330 x 75 mm

Weight: 6 kg