Tandberg TR-2025

 The TR-2025 completes the TR 2000 series - 3 top models to meet a variety of needs and pockets. The stereo FM section has pre-tuning for 5 stations. The power amplifiers deliver more than 2 x25 watts in 8 ohms over the complete frequency range from 20 to 20,000 Hz with less than 0,15% total distortion.

 The FM Section Features

Excellent stereo tuner.MOSFET, IC's, and 3x 4-pole ceramic filters providing extremely good sensitivity and selectivity.

Automatic switchover to FM Stereo

Automatic frequency control (AFC) disconnects itself during tuning and connects itself again when tuning is completed. Can also be operated manually.

Heavy flywheel gives smooth, precise tuning.

Muting for quiet tuning.

 DiN sockets for 2 tape recorders. Both inputs have Tape Monitor facility

Input for transcripton unit (mag. p.u.)

Copying facilities for 2 tape recorders simultaneously

Low and High filters

Frequency / loudness compensated volume control

Front output jack for stereo headphones

Specifications

Amplifier Section

Output Power per channel, sine wave, with 1 kHz in 8 Ω /4 Ω:   32 W /40 W.  Both channels driven simultaneously DIN 45500

Output Power per channel , sine wave, from 20 to 20,000 Hz in 8 Ω:   25 W.   Both channels driven simultaneously. 0,15% Distortion

Distortion (with output power 1 dB below nominal and lower at 1 kHz in 8 Ω (4 Ω):  0,08%

Intermodulation (according to DIN 45 500):  0,15%

Damping Factor (nominal output power in 8 Ω (4 Ω):  65 (25) 20-20,000 Hz

Frequency Response (from linear inputs (-15 dB):  8 - 50,000 Hz

Channel Separation (at 1 kHz minimum):  60 dB

Tone Controls: 

Treble  Control at 10 kHz : ±15 dB

Frequenzy/Loudness at 10 kHz : +3 dB

Bass Control at 50 Hz : ±15 Hz

Frequency/Loudness at 50 Hz : +9 dB

Low Filter -12 dB/oct, -3 dB at 70 Hz

1 High Filter  -12 dB/octave, -3 dB at 8 000 Hz

Input Sensitivity (nominal  output power in 8 Ω):

Tape 1 : 170 mV

Tape 2 (Extra) : 170 mV

Phono 1  Magn. (cer) : 2,3 mV

Signal-to-Noise Ratio (2x50W in 8 Ω according to DIN 45 500):

Tape 1 : 61 dB

Tape 2 (Extra) : 61 dB

Phono 1 : 60 dB

Tuner Fm Section

Wave Band:  87,5 - 108 MHz

Frequency Response (-3dB):  20 - 15,000 Hz

Sensitivity in Mono (for 26 dB S/N accor. to DIN 45 500 with 75/300 Ω aerial impedance):  0,8 µV/1,6 µV

Sensitivity in Stereo (for 46 dB S/N accor. to DIN 45 500 with 75/300 Ω aerial impedance):  20 µV/40 µV

Signal-to-Noise Ratio (with 1 mV aerial voltage):

Unweighted (according to IHF),  Stereo/Mono : 70/72 dB

Weighted (according to DIN), Stereo/Mono : 60/62 dB

Unweighted (according to DIN) , Stereo/Mono : 63/65 dB

Distortion (according to DIN), Stereo/Mono :  0,4%/0,2%

Selectivity (according to IHF), ±400 Hz :  75 dB

Image Frequency Rejection Ratio:  70 dB

AM suppression:  65 dB

IF Rejection:  95 dB

Limiting (-3dB) with 75 Ω aerial impedance:  0,7 µV

Muting Thereshold with 75 Ω aerial impedance:  3 µV

Capture ratio:  1,5 dB

Channel Separation (accor. to DIN 45 500):  40 dB

Pilot Tone Suppression (accor. to DIN 45 500):  55 dB

38 kHz Suppression (accor. to DIN 45 500):  55 dB

General

Cabinet:  Delivered in Teak, Rosewood or Walnut

Mains Voltage:  240 V 50.60 Hz (internal tappings for 120-220-240 V)

Dimensions (W x H x D):  515 x 143 x 320 mm (20½" x 5¾" x 12¾")

Depth with knobs:  322 mm (13¼")

Weight:  8,3 kg (19 lbs)