Rotel RA-610 amplifier

Rotel RA-610

The  RA-610 is equipped with every conceivable control and feature any demanding audiophile ever hopes of having on his unit. The RA-610 was designed for both the versatility and ease of operation. It will add professional studio flexibility to your present music center.

The performance of RA-610 is exceptional it will allow you to experience true high fidelity as never before. its full and natural stereo phonic reproduction offers you musical entertainment  rivaling that of live performances.

Special Features:

Direct Coupling Output Circuit eliminates the need for an output capacitor, thereby, permitting better frequency response at lower IM distortion.

Differential  Amplifier provides higher stability and lover distortion

Split Power Supplies for left and right channels decrease frequency damping factor and overall distortion.

Tone Defeat switch offers absolute flat response

-20 dB Muting switch provides instataneous quietness

Tape Monitor switch for tape playback and recording

Dual slide tone controls for Bass and Treble offer easy and accurate tone adjustment.

High and Low Filter switches, -9 dB cutoff, for eliminating rumble and scratch noises.

Loudness switch for boosting extreme low frequencies during low volume operation

Two pairs ofm agnetic input jacks for two sets of record players with different input impedances.

Pre-amplifier Outputs for use with separate power amplifier or multi-channel system

Main-amplifier Inputs for use with separate control amplifier or tape recorder.

Front Panel Stereo headphone Jack for easy use

Two speaker Selector switches for individual or simultaneous operation of two speaker systems

Handsame Wood Cabinet.

specifications

Power Output:

Total Music Power (IHF):  120 watts at 4 ohms;  90 watts at 8 ohms

Continuous Power (RMS):  32 watts/channel, 8 ohms at each channel driven

Distortion :

Harmonic :  less than 0,1% at rated output

Intermodulation :  less than 0,1% at rated output  (70 Hz : 7,000 Hz = 4 : 1)

Frequency Response:

Main Amp. ONly :  3 Hz to 1000,000 Hz +0 db to -3 dB

Auxiliary Inputs :  5 Hz to 90,000 Hz +0 dB to -3 dB

Power Bandwidth (IHF):  3 Hz to 55,000 Hz

Input Sensitivity (at rated output)/ Impedamce:

Phono 1 :  2,5 mV/50 k Ω

Phono 2 :  2,5 mV/100 k Ω

Tuner :  120 mV/25 k Ω

AUX 1, 2 :  120 mV/25 k Ω

Tape In :  120 mV/25 k Ω

Main Amp. Input :  650 mV/35 k Ω

Signal-to-Noise Ratio :

Phono 1 :  65 dB

Phono 2 :  65 dB

Tuner:  80 dB

Aux 1 , 2, Tape In :  80 dB 

Residual :  1 mV

Square Wave Rise Time:  2,2 microseconds

Damping Factor:  35 at 8 ohm;  70 at 16 ohm

Output Impedance:

Speaker terminals :  4, 8, 16 ohms at full rating

Pre-amp Output :  50 ohms

Loudness Switch :  +10 dB at 50 Hz

High Filter : -96 dB at 10 kHz

Low Filter :  -9 dB at 50 Hz

Muting:  -20 dB at 1 kHz

Bass Control:  +15 dB to -13 dB at 50 Hz

Treble Control:  +14 dB to -16 dB at 10,000 Hz

Phono Overload:  over 100 mV

Phono Equalizer:  +17 dB at 50 Hz

Cross-Talk:  60 dB at 1 kHz

Dimensions (W x H x D):  16-1/4 x 8-3/4 x 4-7/8 inch

Weight:  13,2 lbs


I like