Optonica
RP-5200 Double
Direct Drive Stereo Turntable
With its
direct drive tonearm motor, the RP-5200 has greatly anhanced tonearm trakking
accuracy, while the direct drive DC turntable motor assures extra-steady
platter rotation. The direct drive tonearm system floats the tonearm over a
record and then gently lets it down on the record at the touch of a control
switch. For extra protection, the solenoid will immediately lift the tonearm
from the record if any malfunction occurs. With soft-touch controls plus a
microprocessor to offer computer accurate control of all turntable features,
instant response to all commands is ensured. A statically-balanced straight
tonearm provides just the right stylus pressure and trackability. A convenient
repeat key allows you to listen to arecord again without having the tonearm
return to the resting position.
Specifications
Type: full-automatic
Motor: DC core-less motor with FG Servo control
system
Drive
System: Direct-drive system
Turntable
Platter : aluminum die-cast
Platter
Diameter: 300 mm
Speed: 33-1/3 and 45 rpm
Speed
Control Range : ±4%
Wow and
Flutter: ±0,06% (DIN 45 500); 0,04% WRMS (JIS C-5521)
Rumble: 45 dB (DIN A); 65 dB (DIN B)
Tonearm
Type: Static-balanced straight tonearm
Effective
length: 215 mm
Overhang: 16 mm
Off-Set-Angle: 23°
Cartridge
Weight Range: 4 - 8 g
Type: VM cartridge type
Output
Level: 3 mV
Frequency
Response: 20 Hz - 20 kHz
Channel
Separation: 20 dB
Channel
Balance: 2 dB
Recommended
Load Impedance: 47 k Ω
Weight: 5,5 g
Recommended
Stylus Pressure: 2 g
Power
Source: 110, 20, 240 V 50/60 Hz AC
Power
Consumption: 10 W
Dimensions
(W x H x D): 430 x 106 x 345 mm
Weight: 5 kg
No comments:
Post a Comment