The A-2 is
two track on quarter-inch tape, mastering machine. The standard of the
industry. But with one added attraction. The A-2 has sync. Which means you can
extend its usefulness. When you need to cut a high quality, low noise, low
distortion master, ecord on the A-2 in its normal mode. But when you need to
perform a little fixing up, or you want to do some added production (like
adding a few ideas at the last minute), use the A-2's Sync mode. It's built-in
to give you added performance flexibility for your dollar. Another way personal
Multitrack fits the equipment to your needs. And your wallet.
The A-2
packs all the features and functions of our multitrack recorders into a rugged,
relatively lightweight mastering machine. It includes LED indicators of peak
transient overload in record or playback modes. The A-2 gives you the kind of
quality needed to help you produce stereo masters that truly showcase your
talent.
Specifications
Tape: 1/4 inch tape width, 1 mil base
Format
: 2 track, 2 channel
Heads: 2 track record; 2 track reproduce, 2 track
erase
Reel
Size: 7 inch
Tape
Speed: 15 and 7½ ips (38 and 19 cm/s) ±0,5%
Pitch
Control: ±10%
Line
Input: -10 dBV (0,3 V) / impedance 30 k
Ω unbalanced
Line
Output: -10 dBV (0,3 V) load impedance
10 k Ω or higher unbalanced
Record Level
Calibration Equalization: 0 VU
referenced to 250 nWb/m of tape flux NAB
Wow and
Flutter:
±0,06% peak
(IEC/ANSI) wtd., at 15 ips
±0,19%
peak (IEC/ANSI) wtd., at 7½ ips
Fast Wind
Time: 130 seconds typ typ. for 1800 ft
of tape
Overall
Frequency Response:
At 15 ips
: 40 Hz - 20 kHz ±3 dB
At 7½ ips ;
40 Hz - 18 kHz ±3 dB
Signal-to-Noise
Ratio (Sync/Reproduce)
At 15 ips
; 65 dB wtd.
At 7½ ips :
referenced to 1 kHz , 3% T.H.D. level
Total
Harmonic Distortion: less than 1% at 1
kHz 0 VU
Crosstalk
(Reproduce): 50 dB (at 1 kHz)
Erasure: better than 70 dB at 1 kHz
Power
Requirements: 120 V AC 60 Hz , 35 W
Dimensions
(W x H x D): 360 x 340 x 170 mm
(14" x 13-1/2" x 6-3/4")
Nessun commento:
Posta un commento