Full Power Balanced
amplifirs can be configurated to accommodate any sophisticated music or home
theater system and can be operated by an optional remote control through the
remote control of other Krell components.
The Full Power
balanced series of amplifiersconsist of three stereo amplifiers, the FPB 200C;
300C; 600C and three nonaural amplifiers , the FPB 250Mc; 350Mc; 650Mc.
Installation, connection, and operation of all amplifiers in the Full Power
balanced series are identical; however, a pair of Full Power Balanced Monaural
amplifier are required for stereo operation.
Krell Current Audio
Signal Transmission - CAST
A propietary Krell
circuit technology for coneccting analog components, in which the audio
waveform is transmitted between components in the current rather than voltage
domain. The speed and bandwidth provided by Krell CAST yields accurate,
realistic music reproduction. Krell components connected via CAST perform as if
they are all part of a single circuit.
A symmetrical input
or output circuit that has equal impedance from both input terminals to a
common ground reference point. The industry standard for profeassional and
sound recording installations, balanced connections have 6 dB more gain than
single-ended connections and allow the use of long interconnected cables.
Balanced connections are completely immune to induced noise from the system or
the environment.
A two-wire input or
output circuit. Use care when using single-ended connections as the ground
connection is made last and broken first. Turn the system off prior to making
or breaking single-ended connections. Single-ended connections are not
recommended for connections requiring long cable runs.
Specifications
Output Power (Each
Channel Driven):
300 W at 8 Ω
600 W at 4 Ω
1200 W at 2 Ω
Output Volyage:
Peak to Peak : 170 V
RMS : 60 V
Frequency
Response: 20 Hz -20 kHz (+0 dB, -0,5 dB)
Signal-to-Noise
Ratio (A weighted): 117 dB
Gain: 26,4 dB
Total Harmonic
Distortion (All Balanced, Unweighted):
At 1 kHz : less than 0,02%
At 20 kHz : less than 0,15%
Input
Sensitivity/Impedance: 2,35 V (RMS)/ 100
k Ω
Inputs:
1 pair balanced via
XLR connectors
1 pair CAST via
4-pin bayonet connectors
Outputs Speaker
Binding Posts: 4 pair (upper left and
right, lower left and right)
Power Consumption:
3000 W (Max); 350 W (Idle), 75 W (Stand by)
Dimensions (W x H x
D): 483 x 262 x 500 mm (19,0 " x
10,3" x 19,7")
Weight (unit
only): 50 kg (110 lb)
Nessun commento:
Posta un commento