Ultrawideband Linear Phase Stereo Receiver
For a medium priced receiver, the hk570i gives you better sound and more features than other comparably priced receivers.
It starts with a full 45 watts per channel, with instantaneous current capability up to 35 amps under peak demands. Our 5-level signal strength meter and station lock beacon help make sure you're always tuned accurately. The Auto FM feature automatically shifts the receiver into the mono mode when signals are so weak that stereo reception is poor. And all tone controls are defeatable, for the clearest cleanest, most distortion-free reproduction possible.
The hk570i also provides convenience features you 'll appreciate. Like tape copy functions and monitoring capabilities for two decks. Plus a subsonic filter, and a high cut filter that help eliminate surface noises from records.
The hk570i, perhaps the best combination of price and performance on the market
Specifications
Amplifier Section
RMS Power Output (into 8 Ω , 20-20,000 Hz): 45 watts (at less than 0,02% T.H.D.
Frequency Response (at rated output): below 1 Hz - 150 kHz (-3 dB)
Intermodulation Distortion (at rated output): ,06%
TIM Distortion (at rated output): ,01%
Slew Rate/Power Amplifier: 60 volts/µsec
Overall Negative Feedback: 25 dB
Hum and Noise (A-weighted):
Phono : -88 dB
Aux : -100 dB
Residual : -100 dB
Phono Overall: >150 mV
Tuner Section
FM Sensitivity MONO: 2,0 µV
50 dB Quieting Sensitivity
Mono : 3,1 µV
Stereo : 37 µV
FM Noise: -75 dB
Capture Ratio: 1,3 dB
Alternate Channel Selectivity: -70 dB
Stereo Separation (1 kHz): 50 dB
FM Frequency Response at Detector Output: DC -60 kHz (-3 dB)
AM Sensitivity: 300 µV/m
Dimensions (W x H x D): 440 x 122 x 368 mm
Weight: 9,54 kg
No comments:
Post a Comment