A new loudspeakers of
advanced design suitable for stuio use and for home installations of the highest
quality.
Even the cabinet's
distinctive visual design contributes to your listening enjoyment. Its tall,
slender silhouette permits maximum enclosure volume in minimum floor space (only
1.2 square feet), while aligning the upper frequency drivers more directly with
the usual listening level.
Driver units
HF 2000 - dome "pressure"
type
MF 500 - Mid-range
dome "pressure" type
Within the cabinet
are a superbly matched set of drivers and the Auxiliary Bass Radiator, all
aligned on a single vertical axis to minimize diffraction effects. High
frequencies are handled by the HF2000 tweeter (specified by the B.B.C. for
monitor use).
The mid-range driver
is the pressure-dome MD500. And for the bass, a combination of the FC12 bass
unit and 12 inch A.B.R. (Auxiliary Bass Radiator) together with the carefully
damped enclosure form an acoustic circuit that operates smoothly to frequencies
well below 40 Hz.
The crossover has
resulted from considerable research and crossover points are at 500 Hz and 5000
Hz, 80 watts maximum. 4 - 8 ohm. This monitor loudspeaker system has an
exeptionally wide and flat, frequency respponse. Very low order harmonic and
intermodulation distortion. Precise response to transients. Beautifully
maintained polar response ensures absenc of unwanted directionall effects and
provides a highly satisfactory stereo image throughout the listtening area.
Specifications
Frequency Response:
18 Hz to 40 kHz
Pink Noise
Sensitivity: 4.8 Watts
Recommended Amplifier
Capacity: 10 Watts to 160 Watts
Driver Complement:
1 x HF2000 Dome
Tweeter (1")
2x MD500 Dome
Mid-range (2")
1 x FC12 Bass (12")
1 x A.B.R (12")
Crossover Frequencies:
500 Hz ; 5 kHz
Cabinet Dimensions: 1000 x 380 x 290 mm (40" x 15" x 11½")
Nett Weight: 26.8 kg
(59.0 lbs)
Shipping Weight:
32.0 kg (70.5 lbs) per pair
No comments:
Post a Comment