Kenwood KC-6060

 Solid State Audio-Lab Scope Kenwood KC-6060 - really find out what's gone wrong with your FM tuners and amplifiers. The KC-6060 is a fully-equipped, long-service-life professional instrument for highest quality testing.

Easy-to-see audio waveform is dispalyed on the 3-inch viewing area by 25 mV/cm (minimum) deflection sensitivity. Wave forms up to 200 kHz are perfectly visualized for diagnosis.

The handy, durable KC-6060 also has a buolt-in 1 kHz oscillator for audio testes.  You don't have to use the other oscillator. Front and rear panels include switchable audio input jacks.  Frequency from 10 to 100,000 Hz are shown at top dispaly quality with the built-in sweep generator.

 Special Features

1. The 3-inch viewing area with 25 mV/cm (minimum) deflection sensitivity provides easy-to-see audio waveform display and serves to visualize wave form of up to 200 kHz for diagnostic observation.

2. The built-in 1 kHz Oscillator for various testing of audio without using the other oscillator.

3. Switchable audio input jacks are provided on both front and rear panels.

4. The built-in Sweep Generator for observing the best dispaly of various frequencies from 10 to 100,000 Hz

5. Solid-State circuits insure cool and reliable performance. Long service life with virtually no maintenance is assured by the manufcturer.

Specifications:

Vertical Amplifier

Sensitivity: 

25 mV p-p/cm (63 mV p-p/inch) at front panel input

250 mV p-p/cm (630 mV p-p/inch) at rear panel input

Frequency Response:  3 Hz to 200 kHz , -3 dB or less

Input Impedance:  250 k Ω

Input Capacity:

Less than 40 pF at front panel input

Less than 60 pF at rear panel input

Horizontal Amplifier

Sensitivity:

25 mV p-p/cm (63 mV p-p/inch) at front panel input

250 mV p-p/cm (630 mV p-p/inch) at rear panel input

Frequency Response:  3 Hz to 200 kHz , -3 dB or less

Input Impedance:  250 k Ω

Input Capacity:

Less than 40 pF at front panel input

Less than 60 pF at rear panel input

Sweep Generator

Sweep Frequency:  10 Hz to 100 kHz in four step

Synchronization:  Internal (-)

Oscillator

Frequency:  1,000 Hz ±10%

Output Voltage:  Max. 1 V RMS

Calibration (Test):  0,1 V p-p ±5%

Input and Output:

Audio Input (L & R), front & rear FM Multipath (V & H) ocsillator output

Selector Switch

Test, Wave Form (L & R), Stereo Display & FM Multipath

General

Cathode Ray Tube:  3 inches

Semiconductors:  4 FETs,  19 Transistors,  14 Diodes

Power oltage:  AC 110- 120 V, 220 -240 V, 50/60 Hz

Power Consumption:  25 watts

Dimensions (W x H x D):  408 x 134 x 280 mm, (16-5/16" x 5-5/32" x 11-1/32")

Weight:  17 lbs