HIGH
PERFORMANCE REFERENCE MONITORING
A main
monitor system for Recording and Post-production studios where the requirement
is for high performance, natural sound reproduction. With a single coherent
wavefront thanks to the 15" Dual Concentric™ point source driver, sound
presented to the engineers is remarkably distortion free. And with the enlarged
monitoring position provided by this remarkable drivers wide dispersion,
monitoring with the System 15 DMT II is particularly fatigue free.
The
availability of new materials and manufacturing processes has allowed Tannoy to
design the System 15 DMT II from first principles, producing an all new Dual
Concentric™ monitoring system with all the classic benefits of single point
source monitoring combined with an exceptionally detailed but fatigue-free
sound.
The style of
the cabinet is not arbitrary, it has been arrived at by considering the
acoustic principles of diffraction and energy storage.
The trim
rings around the rubber surrounds are there to smooth out the otherwise
discontinuous contour to the HF wavefront.
The smooth
lines around the port tubes ensure laminar air flow at low frequencies where
the air in the ports has maximum velocity.
The shapes
of the LF cones continue the hyperbolic waveguide for the HF energy
propagation.
The cabinet
bracing and internalconstruction ensures that the HF unit can deliver the
detail into the sound field.
The
application of the Differential material Technology approach to component
behaviour ubder vibration and magnetic fields has lead to custom crossover
components, custom cabling and split crossovery design being employed.
Specifications
Frequency
Response (±3dB, measured at 1m in anechoic chamber): 38 Hz – 25 kHz
Recommended
Amplifier Power: 50 to 400 W rms into 8 Ω
Peak Power
Handling: 600 watt
Power
Handling: Average: 200 W rms;
Programme: 400 W rms
Nominal
Impedance: 8 Ω
Sensitivity
(Averaged over specified bandwidth for half-space environment. For anechoic
conditions the figure is to be decreased by 3dB): 101 dB SPL /2.83V at 1 m
Distortion: Less than 0.5% (38 Hz - 25 kHz)
Dispersion
(at -6dB): 90 conical
Crossover
Frequency and Type: 1,1 kHz; 2nd order
overdamped LF; 1st order HF Positive acoustic polarity
Crossover
Controls: Treble energy range 2 kHz -20
kHz (settings) +1,5 dB, Level, -1,5 dB
Drive
Units: 15" full range, single Point
Source, Dual Concentric™
Internal
Volume: 100 litre
Low
Frequency design: Optimised bass-reflex
loaded, in 140 litres
Cabinet
Construction: MDF (36mm - front and
back; 20.6mm - top, bottom and sides) with energy absorbing bracing matrix and
TF-2 acoustic wadding
Cabinet
Finish: Velti shadow grey soft-texture
finish. High pressure twin laminate in shadow grey with metallic speckled
finish on top, bottom and sides
Grille: Single piece, black acoustically transparent
material on a wood- en frame
Cabinet
Dimensions (HxWxD): 840 mm x 550 mm x
440 mm (33” x 21.6” x 17.3”)
Cabinet
Weight: 45kg (99.2lbs)
Hello, do You know what is the recommended room size in square meters for such speakers?
ReplyDeleteHello, do you know how to tell the difference between MK I and MK II?
ReplyDelete