The AR-2ax are lower cost versions of our basic acoustic suspension
design. Each has a 10-inch bass speaker, mounted in an acoustically sealed
enclosure filled with glass wool, and in addition , a small, high-dispersion
cone speaker. In the AR-2ax there is a third speaker, a ¾-inch hemisphere for very high frequencies,
the same unit as is used for this purpose in the AR-3a. Separate controls on
the back of the AR-2ax permit independent adjustment of the level of
the midrange and high frequency speakers.
The
performance standard in the design of the AR-2ax was the same as that
for the AR-3a; natural reproduction of music without exaggeration or
artificiality of sound. But where quality in the case of the AR-3a hes been
limited only by the state of the art. And our own engineering skill, here price
is also a consideration.
"… the
low-frequency speaker has exceptionally low bass distortion … the tone burst
response of the AR-2ax gave further evidence of its excellent quality … comes
remarkably close to matching the AR-3."
HiFi Stereo Review
Specifications AR-2ax
Sensitivity:
91,5 dB
Response:
42 Hz to 20,000 Hz (± 2 dB)
Recommended
Amplifier Power: 20 watts RMS,
Minimum
impedance: 8 ohms
Woofer resonance:
Free
air : 26 Hz
In enclosure :
56 Hz
Speaker
Complement:
Woofer :
10" acoustic suspension
Midrange
: 3 ½" cone
Tweeter
: ¾" hemispherical dome
Crossover
Frequencies: 1400
Hz/5000 Hz
Controls: Independent midrange and high-frequency adjustments
Volume
of enclosure: 38.2 litres (1.35 cu ft)
Dimensions: 13 ½" x 24" x 11 ½"
Weight: 16,6
kg (36,5 lbs)
Finish: Glossy or oiled walnut, cherry, oiled teak,
mahogany, birch and unfinished pine.
No comments:
Post a Comment