Technics new
linear-tracking SL-5. with plug-in cartridge capability made affordable. Just
place the record on the platter, close the cover and press start. Everything
else is automatic, including the pleasure.
Utilizing
the same linear-tracking concept featured in the renowned Technics SL-10 and
SL-15. technics now introduces both the album-sized SL-5 and the compact
SL-DL5. each of these two new models offers you the same incredible performance
and uncanny accuracy of technics linear-tracking at prices equal to many of
today's conventional turntables.
Both feature
Technics plug-in cartridge system, so installation is always easy, exact and
precise. Best of all, the music won't be distorted by improper mounting.
This model
also offers technics direct-drive motor. Dynamically balanced tonearm with
gimbal suspension. Aluminum die-cast platter. Tonearm position indicator LED
and scale to show the precise location of the tonearm on the record. Abuilt-in
muting circuit to eliminate "cliks" and "pops" when the
stylus makes contact with the record surface. Plus convenient front panel
controls.
Technics
Linear Tracking and How it Differs
The best
testimony for the linear tracking concept is its use in mastering lathes.
Record manufactures use linear tracking to meke records, so it's obvious that
it is the best method available to play them back. The point is simple, linear
tracking tonearms play the records ezactly as they were originally cut.
Therefore, tracking error is completely non-existent, and distortion becomes a
notion with meaning only on the test bench. So if linear tracking arms
share these attributes, why should you
choose technics?
One reason
is the dynamic balance system - it makes certain that tracking force is always
precise and accurate. Plus, Technics incorporates a very sophisticated
optoelectronic deflection angle detection system, governed by microcomputer and
constantly monitored. You can therefore
be sure that the stylus is always at the precisely correct angle to the
grooves. A potential source of inaccuracy and distortion is thus removed. And
we designed the tonearm system with painstaking attention to detail - a gimbal
suspension system increases sensitivity, and a low-friction slide bearing
reduces vibration and assures precise tonearm transport.
Other
Valuable Features.
Small
details can make a big difference in reliability, convenience, and reproduced
sound quality. That's why we've equipped the SL-6 with these valuable
additional features:
30 cm
912"0 diameter aluminum die-cast platter
Full cycle
detection FG servo mechanism
Built-in 45
rpm adaptor
Tonearm
position indicator LED and scale
All front
panel controls with electronic
soft-touch switch
Isolator
feet
Manual speed
selection possible for playing nonstandard discs
Turntable/tape
deck synchronized play capability.
Specifications
Turntable
Section
Type: Direct Drive Automatic Turntable
Functions: Auto start/ Auto lead-in; Auto stop and Auto
return; programmable band selection; Repeat play; Auto speed select (manual
speed selection possible); Auto size select and record presence detection.
Drive
Method: Direct Drive
Motor: Brushless Dc Motor
Drive
Control method: F G servo control
Turntable
Platter: Aluminum die-cast
Diameter: 300 mm (12")
Speeds: 33 ⅓ and 45 rpm
Wow and
Flutter: 0,012% WRMS, ±0,035% peak
Rumble:
Unweighted
: -56 dB
Weighted
: -78 dB
Tonearm
Section
Type: Dynamic balanced Linear tracking, 4-pivot
gimbal suspension
Effective
length: 105 mm (4-1/8")
Tracking
Error Angle: Within ±0,1°
Effective
Mass: 9 g (including cartridge)
Resonance
Frequency: 12 Hz
Tonearm
Drive Motor: DC motor
Phono Cable
Capacitance: 150 pF
Cartridge
Section
Model
No.: EPC-P24S
Type: Moving
magnet stereo cartridge. One point suspension system
Magnetic
Circuit: All laminated core
Frequency
Response: 10 Hz - 40 kHz; 20 Hz - 10 kHz ±1 dB
Output
Voltage: 2,5 mV at 1 kHz, 5 cm/s, zero
to peak lateral velocity (7 mV at 1 kHz, 10 cm/s, zero to 45°velocity (DIN
45500)
Channel
Separation: More than 22 dB at 1 kHz
Channel
balance: Within 1,8 dB at 1 kHz
Recommended
Load Impedance: 47 k Ω - 100 k Ω
Compliance
(Dynamic): 12 x 10¯⁶ cm/dyne at 100 Hz
Stylus
Pressure Range: 1,25 ±0,25 g (1,25 ±2,5
mN)
Weight: 6 g (cartridge only)
Replacement
Stylus: EPS-24CS (elliptical stsylus)
General
Section
Power
Mains: 240 V AC, 50/60 Hz
Power
Consumption: 11 W
Dimensions
(W x H x D): 315 x 88 x 315 mm (12½ x 3½ x 12½ inches)
Maximum
Height (when top is open): 390 mm
(15-23/64")
Weight: 4,4 kg (9,7 lb)
No comments:
Post a Comment