Tannoy Arden

This system is a highly developed and refined version of the Tannoy loudspeaker. It utilises the dual concentric principle to provide an integrated sound source which, over the past quarter of a century, has become an established quality reference in recording, broadcasting and television studios.

The Tannoy system combines a precision built high frequency compression horn driver with a direct radiator bass unit embodying the unique Girdacoustic ( on HDP385A and HDP315A only) reinforced cone.

These two drivers are mounted concentrically on a single frame and magnet assembly. They are driven  through a sophisticated separate crossover network creating a system covering the entire frequency range from 20 Hz to 20 kHz.

Distortion products are negligible, and the wide, smooth frequency range with excellent transient response result in very natural reproduction and an almost total lack of colouration.

Sensitivity is high. A 20 Watt amplifier used with the smaller systems is more than adequate for normal domestic purposes. This sensitivity combined with high power handling capacity, makes the larger units ideal for the most sophisticated professional or home installations.

 ARDEN

The outstanding performance characteristics of the HPD385A Integrated Loudspeaker System are completely realised by the Arden, the largest model in the range. An extended bass response is obtained through the use of a triple ducted port system resulting in very low distortion products. The system is front recess mounted to avoid tunnel and diffraction effects. With generous internal strutting for high rigidity, the internal cavity is critically damped with graded acoustic foam ensuring lack of colouration in the bass response.

A - Rolled surround for stability in low bass response

B - Unique ribbing virtually eliminates cone break-up ensuring smooth response and extraordinarily high power capacity

C- High temperature voice coil

D - Dustproof, acoustically transparent sealing dome

E - Concentric HF horn (completed by curved LF cone)

F - Phase compensating multiple throat for extended and smooth HF response

G - Acoustic balance cavity for reduced distortion

H - Precision contoured high frequency diaphragm

I - Aluminium voice coil conductor for superb HF response

J - Exclusive magnetic shunt for increased LF flux

 The Crossover Network

The Tannoy crossover network divides the electrical energy from the amplifier between the high frequency compression driver and the low frequency direct radiator and makes a vital contribution to the overall performance of the system.

It incorporates two controls. One permits attenuation of the treble energy output only in the range above 5 kHz. The other allows the output of the high frequency unit to be increased or attenuated over its entire range from 1 kHz to 20 kHz, compensating for roomacoustics and individual preference.

The crossover is assembled to the very highest standards on a fibreglass printed circuit board. Solid dielectric capacitors are used throughout and all resistors and inductors are very generously rated.

The design of the crossover ensures that the complete loudspeaker system has an excellent impedance characteristic which provides the ideal load for any amplifier.

Components

Integrated Drive System

The Tannoy Integrated Drive System consists of a direct  radiator bass unit and a high frequency horn-loaded compression driver both located concentrically within the same frame and magnet assembly, this is why it is known as the dual concentric system.

Bass Unit

This is a low resonance speaker with a 2" high temperature voice coil. The unique Girdacoustic reinforced cone ensures true piston action and smooth performance extending well into the midrange region.

Treble Unit

High frequencies are reproduced by a horn-loaded compression driver utilizzing a duralumin diaphragm and a 2" diameter aluminium voice coil.

Specifications

Low Frequency Direct Radiator

Maximum Diameter:  420 mm (16 ½")

Voice Coil Diameter:  50 mm (2")

Bl Factor in gauss/cm:  20 x 10⁶

Fundamental Resonance:  20 Hz

High Frequency Compression Driver

Duralumin Diaphragm:  50 mm (2")

Voice Coil  Diameter:  50 mm (2")

Horn Cut-off Frequency:  500 Hz

Drive System:  3828

Power Handling Capacity:  85 W

Nominal Impedance: 8 ohms

Frequency Response:  30 Hz - 20 kHz, ±4 dB

Sensitivity; Input Watts produce 96 dB at 1 m:  3

Crossover Frequency:  1 kHz

System Dimensions (H x W x D):  990 x 660 x 370 mm (39" x 26" x 14 ½"

Weight:  56 kg (shipping)