Stereo
Console Amplifier Features:
Low TIM
Design
DC
Amplifier
Bas,
Midrange and Treble Controls
Low and
High Filters
Full
Complementary Direct Coupled Output
Two Tape
Monitors
Tape Copy
Facilities
Shown in
optional walnut veneer cabinet
Technical
Specifications
Amplifier
Section
Rated
Power Output (Min. Contiuous Average Power per Channel, both Channel
Driven): 61 W (Power band: 20 Hz to 20 kHz; Total Harmonic Distortion: 0,03%; Load Impedance: 8 Ω)
Rated
Power Output (Min. Contiuous Average Power per Channel, both Channel
Driven): 77 W (Power band: 20 Hz to 20 kHz; Total Harmonic Distortion: 0,09%; Load Impedance: 4 Ω)
IM
Distortion (IHF method, 60 Hz and 7 kHz mixed 4 : 1 rated power output)
At 8 Ω
Load Impedance : 0,03%
At 4 Ω
Load Impedance ; 0,09%
Damping
Factor (at 20 Hz): 60
Sensitivity
(at Main In): 1,5 V
Impedance
(at Main In): 30 k Ω
Frequency
Response (power Amp Only): 20 Hz to 20
kHz ±0,2 dB (at 1 watt output)
Signal-to-Noise
Ratio (Main In "A" weighted):
110 dB
Preamplifier
Section
Phono
Input
Overload at 1 kHz: 200 mV
Equivalent
Input Noise ("A" weighted):
0,48 µV
Dynamic
Range: 109 dB
Input
Sensitivity: 1,8 mV
Input
Impedance: 47 k Ω
Frequency
Response (RIAA 20 zh to 20 kHz): ±0,3 dB
Signal-to-Noise
Ratio ("A" weighted, at rated output and 7,75 mV input): 83 dB
High
Level (Aux and Tape)
Input
Sensitivity: 180 mV
Input
Impedance: 20 k Ω
Frequency
Response (includes power amp.): 5 Hz -
60 kHz ±0,1 dB
Signal-to-Noise
Ratio ("A" weighted; ref.to rated output and 775 mV input): 93 dB
Output
levels
Tape Out
(ref. 7,75 mV at phono input): 775 mV
Pre Out
(ref. 180 mV at Aux inputs): 1,5 V
(ref. 500
mV at Aux inputs, main amp disconnected):
4,2 V
Output
Impedance
Tape Out
: 330 Ω
Pre Out
: 220 Ω
General
Power
Requirements (USA only): 120 V AC, 60 Hz
Power
Consumption (at rated output, both channels operating): 250 watts
Idling
Power (Volume Control at zero): 50 watts
Dimensions
(W x H x D): 416 x 146 x 312 mm
(16-3/8" x 5-3/4' x 12-3/8")
Weight
(Unit alone): 12,5 kg (27,5 lbs)
No comments:
Post a Comment