Pioneer RT-1011L
Pioneer's
engineering policy assures reliable operation and quality performance from the
new RT-1011L 4-track stereo tape deck.
A thick 5 mm front
suspension panel and solid, die-cast
framework provide extra strength margin for the 10-1/2 inch reel load and
stable tape transport system.
Wow and flutter is
reduced by the precision 4/8-pole hysteresis synchronous capstan drive motor,
coupled with a "tuned" 100 mm flywheel and high-precision 0,2 µ-error
capstan.
A high-torque 6-pole
induction motor ensures optimum tape tension. The 2-channel 4-track recording
and playback heads are hyperbolic for superb tonal quality, ideal head-to-tape
contact, and exhibit excellent
electromagnetic
characteristics. All three heads are arranged in a short tape path to enhance
stability. And Pioneer's long experience in tape deck design means top
versatility. the RT-1011L includes
switched circuits
for 2-step bias and 2-step equalization for balanced recordings with any tape.
Advanced design and electronics also means wide dynamic range from the mic/line
mixing, solenoid-operated
direct-changeable
function buttons, auto record facility
for use with pre-set timer. large level meters, lockable pause, and more.
Specifications:
Operation: 3-motor, 3-head system, 4-track 2-channel
recording, 4-track 2-channel playback
Heads:
1 x playback head
1 x recording head
1 x erase head
Motors:
2 x For Reel : 6-pole iner rotor induction motor
1 x For Capstan
: 4/8-pole hysteresis synchronous motor
Tape Speeds: 19 cm/s (7-1/2 ips); 9,5 cm/s (3-3/4 ips)
High Speed Wind
Times:
10-1/2" Reel
: 110 sec at 740 m (2400 feet) tape
7" Reel : 90 sec at 370 m (1200 feet) tape
Wow and Flutter:
19 cm/s : 0,08% WRMS
9,5 cm/s : 0,10% WRMS
Signal-to-Noise
Ratio: more than 55 dB
Distortion: less than 55 dB
Frequency Response:
19 cm/s : 40 Hz to 20,000 Hz (±3 dB)
9,5 cm/s : 40 Hz to 12,000 Hz (±3 dB)
Crosstalk: more than 60 dB
Stereo Channel
Separation: more than 50 dB
Erase Ratio: more than 60 dB
Recording Bias
Frequemcy: 125 kHz
Inputs
Sensitivity/Impedance:
Microphone : 0,25 - 80 mV/ 20
k Ω (1 mV ref.)
Line : 50 mV - 25 V/ 100 k Ω (316 mV ref.)
DIN : 15 mV - 1,5 V/ 1,5 k Ω
Outputs :
Line : 316 mV/50 k Ω load at 0 VU (Output
impedance less than 10 Ω
)
DIN : 316 mV/50 k Ω load at 0 VU (Output
impedance less than 10 Ω
)
Headphone : 40 mV/ 8 Ω at 0 VU (Load
Impedance 4 to 16 Ω
)
Power
Requirements: AC 120 V 60 Hz
Power
Consumption: 115 W
Dimensions (W x H x
D): 428 x 431 x 227 mm (16-27/32" x
17" x 8-15/16")
Weight: 18,6 kg (41 lbs)
No comments:
Post a Comment