Stereo Interated Amplifier System :
Pre Section : Low-noise, Equalizer amplifier
Power Section : Pure-complementary SEPP OCL Power amp with all stages directly coupled
Specifications
Continuous Power Output RMS both channels driven
DIN 1 kHz : 110 W + 110 W (4 Ω ); 90 W + 90 W (8 Ω )
20 Hz - 20 kHz : 80 W + 80 W (4 Ω ); 75 W + 75 W (8 Ω )
Input Sensitivity/Impedance
Phono MM : 2,0 mV/50 k Ω
Phono MC : 0,25 mV/100 Ω
Tuner, CD, Aux, DAT, Tape 1, 2 : 150 mV/50 k Ω
Output Load /Impedance
Rec Out: 150 mV/1 k Ω
Speakers : 4 - 16 Ω
Headphones : accepts low and high impedance
Total Harmonic Distortion: less than 0,008% at 10 W output
Intermodulation Distortion (60 Hz : 7 kHz = 4 : 1): less than 0,008% at 10 W output
Frequency Response:
Phono : RIAA equalization curve ±0,5 dB
Tuner, CD, Aux. DAT/Tape 1, Tape 2 : 7 Hz - 100 kHz (+0 -3 dB)
Residual Noise: less than 170 µV (Network A)
Damping Factor : 70 (8 Ω , 1 kHz)
Signal-to-Noise Ratio :
Phono MM : 94 dB
Phono MC : 76 dB
Tuner, CD, Aux, DAT, Tape 1, 2 : 103 dB
Tone Controls
Bass : ±7 dB at 100 Hz (300 Hz turnover frequency)
Treble ; ± 6 dB at 10 kHz (5 kHz turnover frequency)
Power Requirements: 220 V - 230 V AC , 50/60 Hz
Power Consumption: 230 W
Dimensions (W x H x D): 430 x 150 x 375 mm (17" x 6" x 14-7/8")
Weight: 9,7 kg (21 lb 7 oz)
No comments:
Post a Comment