We've the fine wood-grain cabinet off of the RX-802 to give you a perfect picture of what performance in a high-quality AM/FM stereo receiver looks like. So see for yourself. It's all here. A masterful blend of the very latest circuitry. Low-noise, long-life silicon transistors integrated circuits. An AM/FM front end that's out front in sensitivity and performance. A power amplifier section that's - well, we'll let you decide for yourself what it is after hearing the giant 6,800 mfd block capacitors in action. And an advanced NF and IC equalizer amplifier. This and more, all within the good looking RX-802 enclosure. And all there for one reason. To give you the most satisfying experience in stereo dynamics that you've had to date. Inside and out, the RX-802 is not only the sweetest looking receiver on the music market, it's the sweetest sounding sweetest looking.
The performance begins here
With a high-performance, high-sensitivity FM front end. The RX-802 has dual-gate MOS FET's and a 4-gang linear-frequency tuning capacitor, the latter largely contributes to sensitivity and performance which you will translate directly into musical enjoyment. If you.ve thought all along that all receivers were basically the same, you'll stop where RX-802 performance begins.
FM IF and AM IF sections
In the FM IF section, 2 high-gain ICs housing 6 differential amplifiers and two linear-phase ceramic filters get together to achieve brilliant selectivity and rejection characteristics. In the AM IF section, a hard working ceramic filter provides equally efficient selectivity. Together with an RF stage in the AM front end, the sum of RX-802 AM features is performance that perks up all ears, no matter how tired.
A tower of power
A stable, split-power supply high-lights the amplifier section, which includes to 6,800 midblock capacitors and an oversized power transformer. That's a lot of satisfaction. It's also a lot of power which the RX-802 maintains constantly. This section also has directly-coupled OCL complementary circuitry to keep the power up and the distortion down, from one end of the audio spectrum to the other - 50 watts per channel, min. RMS, both channels driven simultaneously into 8 ohms from 20 to 20,000 Hz with no more than 0,5% Total Harmonic Distortion. And "steady she goes" doesn't only apply to ships. Now it describes the dampening factor and output characteristics which achieve superb transient response throughout the very low frequency range.
NF and IC equalizer amplifier
Genuinely outstanding RIAA characteristics are achieved through low-distortion, directly coupled NF (negative Feedback) circuitry combined with high voltage IC. Reproduction is more transparent than ever before. And added bonus is that tone control circuitry benefits from the same directly coupled NF circuitry.
PLL MPX section
Phase Lock Loop integrated circuitry and other new circuitry innovations in the MPX section result in improved stereo separation and frequency response. Distortion goes way down and stays there.
Specifications
Amplifier Section
Continuous Power Output (min. RMS)
50 watts per channel, both Channel Driven into 8 Ω from 20 to 20,000 Hz with no more than 0,5% t.h.d
60 watts per channel, both Channel Driven into 8 Ω at 1 kHz with no more than 0,5% t.h.d
Harmonic Distortion: less than 0,05% (8 Ω , 1 kHz, 90% rated power)
Intermodulation Distortion : less than 0,15% (8 Ω , 90% rated power)
Power Bandwidth (IHF): 5 to 50,000 Hz (8 Ω )
Frequency Response: 10 to 100,000 Hz ±3 dB, 1W/1W
Damping Factor: 40 (8 Ω , 1 kHz)
Input Sensitivity/Impedance:
Main IN : 100 mV/ 34 k Ω
Tape Monitor : 140 mV / 26 k Ω
Aux 1, 2 : 140 mV / 26 k Ω
Phono 1, 2 : 2,4 mV / 40 k Ω
Tape Output Level: 280 mV/ 1,7 k Ω
Phono Overaload: 150 mV (1 kHz)
Phono Equalization: RIAA standard ±0,5 dB
Controls
Bass : ±10 dB at 100 Hz
Treble : ±10 dB at 10 kHz
Loudness Contour: ±6 dB/100 Hz +4 dB/10 kHz
Crosstalk: 50 dB / 10 kHz
Hum and Noise (Continuous Power Output)
Phono : 65 dB
Tape : 80 dB, Residual 0,5 mV
Speaker Impedance: 4 to 16 ohms
FM Tuner Section
Frequency Range: 88 to 108 MHz
Sensitivity (IHF): 1,5 microvolts
Signal-to-Noise Ratio : 70 dB
Harmonic Distortion:
Mono : 0,2%
Stereo : 0,4%
Selectivity: 80 dB ±400 kHz
Capture Ratio: 1,0 dB
Stereo Separation: 40 dB at 100 Hz, 40 dB at 1 kHz, 35 dB at 10 kHz
IF Rejection: 100 dB
Image Rejection: 100 dB
Spurious Response Rejection: 100 dB
SCA Suppression: 70 dB
AM Suppression: 55 dB
AM Tuner Section
Frequency Range: 520 to 1650 kHz
Sensitivity: 15 microvolts
Selectivity: 50 dB ±10 kHz
IF Rejection: 80 dB
Image Rejection: 80 dB
Signal-to-Noise Ratio: 55 dB
General
Power Requirements: AC 100, 120, 220, 240 V, 50/60 Hz
Power Consumption: 450 W max
Dimensions (W x D x H): 24" x 15" x 5-3/8"
Weight: 13,5 kg (35,2 lbs)
No comments:
Post a Comment