What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





JVC R-S11 receiver

 

FM/AM Stereo Receiver. 

All the Performance and Power You Should Ever Need

Then admit that the JVC R-S11 is the best buy around for your hi-fi money. Innovative features are many to keep vital hi-fi parameters up to snuff. Thanks to JVC microelectronics, performance has been improved and reliability enhanced several fold for years of trouble-free listening.

 

Output Capacitor=Less (OCL) design; for effective distortion-free performance

The power amp in the JVC R-S11 is of the time-tested fully complementary OCL configuration, with its internal stages directly coupled to each other. The bonus you get is clarity and crispness in reproduced sound. It delivers the rated outut, quoted above, with exceptionally low distortion.

 

Phono equalizer: Hear how the artists on your records really sound.

False coloration in reproduced music from disc records is annoying in the least, outrageous in the extreme. To avoid it, JVC has given the JVC R-S11 a phono equalizer that adds practically no color of its own - RIAA accuracy is maintained within ±0,5 dB .throughout a wide 20 Hz to 20 kHz range. The circuit makes use of Negative Feedback (NFB) to contain distortion and achieve a high 88 dB Signal-to-Noise Ratio (at 10 mV input).

 

Tone control: A useful hi-fi tool with NFB

We've made the bass and treble tone controls in the JVC R-S11 easier to use by providing slider-type control pots. And we've made tone control more accurate by designing the circuit to offer natural boost/cut characteristics; levels may be adjusted up to ±8 dB at frequencies centered al. 100 Hz and 10 kHz.

 

Peak Power Indication keeps you informed of actual output.

It's not often that you'll find a receiver in this price range with such an accurate indicator of actual power output. The eight green LEDs show the moment-by-moment peaks in the stereo output with extreme accuracy over a wide range from 0,03 to 25 watts. It's fun to watch and functional, too.

 

FM/AM tuner. Signal-pulling sensitivity and pin-point accuracy.

The combination is more than ideal; a junction FET RF amp, a 3-gang variable capacitor for FM and a PLL multiplex stereo demodulator contained in an IC. Weak signals are pulled in with almost no interference from powerful signals of adjacent stations, while strong signals are tamed for low overload distortion.

Tuning your favorite stations is easy - an array of the five LEDs shows when the signal is strongest (and distortion and noise lowest). A 3-LED FM tuning indicator tells you exactly when you're accurately tuned at the center of an FM broadcast.

 


Specifications

FM Tuner Section

Tuning Range:  87,6 - 108 MHz

Usable Sensitivity (IHF):  10,3 dBf (1,8 µV/300 )

50 dB Quieting Sensitivity

Mono :  14,8 dBf (3,0 µV/300 )

Stereo :  38,3 dBf (45 µV/300 )

Total Harmonic Distortion

Mono :  0,15 % (1 kHz)

Stereo :  0,3 % (1 kHz)

Signal-to-Noise Ratio

Mono :  82 dB (74 dB DIN)

Stereo :  70 dB (65 dB DIN)

Selectivity:  65 dB +_400 kHz (35 dB +_300 kHz DIN)

Capture Ratio:  1,0 dB

IF Rejection:  90 dB at 98 MHz

Image Rejection:  60 dB at 98 MHz

Stereo Separation:  45 dB at 1 kHz

MW Tuner Section

Tuning Range:  525 kHz - 1605 kHz

Usable Sensitivity:  300 µV/m , 30 µV (external antenna)

Signal-to-Noise Ratio:  50 dB

Distortion:  0,5% at 10 mV/m

Selectivity:  40 dB ±10 kHz (36 dB ±9 kHz)

LW Tuner Section (only in JVC R-S11L)

Tuning Section:  150 kHz - 350 kHz

Usable Sensitivity:  500 µV /m 300 µV (external antenna)

Signal-to-Noise Ratio:  50 dB

Distortion:  0,5% at 10 mV/m

Selectivity:  40 dB, ±10 kHz (36 dB, ±9 kHz)

Amplifier Section

RMS Power (Both Channels driven, from 20 Hz to 20 kHz):  25 W per channel at 8

RMS Power:  27 W per channel at 8

Total Harmonic Distortion:  0,004% at rated power 1 kHz, 8  

Input Sensitivity/Impedance:

Phono :  2,5 mV/47 k

Tape Play :  120 mV/40 k

Tone Control

Bass :  ±8 dB at 100 Hz

Trebel :  ±8 dB at 10 kHz

Hum and Noise (IHF, Weighted A-network)

Phono :  77 dB (75 dB New IHF)

Aux, Tape Play :  97 dB (75 dB New IHF)

Power Requirements:  AC 220 V 50 Hz

Power Consumption:  310 W

Dimensions (W x H x D):  422 x 119 x 345 mm

Weight:  6,8 kg

Nessun commento:

Posta un commento