All the technology you need to build your own home A/V system
The RX-8SD comes with all the technology you need to enjoy theater sound from the videos you watch at home. Dolby Pro Logic Surround, high power for three front channels, our exclusive Theater DAP and three video connections ensure your enjoyment. But our new receiver is also designed for high musical purity, featuring high stereo power output, low-impedance (4 Ω ) driving capability. Advanced Super-A and gold-plated terminals. Turn to JVC for entertainment in style.
High power for three front channels.
Set for Dolby Pro-Logic mode, the RX-8SD delivers the same high power to the front left, right and center channels. Equal high power for all three front channels ensures that sound and dialog are firmly locked to the screen, to dramatically enhance the sense of being in a theater.
Dolby Pro Logic Surround and Theater DAP
Dolby Pro Logic lets you experience the realistic equivalent of theater sound at home when you watch videos. With the RX-8SD, the sound is digitally processed for precise localization, low distortion and wide dynamic range. Theater DAP (Digital Acoustics Processor) enhances the sense of being in a theater with added hall reverberations.
Independent center-channel tone control
An independent center-channel control ensures you enjoy consistent and balanced sound from three front speakers, even it they are of different designs.
Specifications
Amplifier Section
Output Power
Stereo Operations: 85 watts per channel,, min. RMS both channels driven into 4 Ω , 20 Hz to 20 kHz with no more than 0,007% T.H.D.
Surround Operation
Front Channels: 80 watts per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 0,7% T.H.D.
Center Channel: 80 watts, min. RMS, driven into 4 Ω at 1 kHz with no more than 0,7% T.H.D.
Rear Channels : 20 watts per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 0,7% T.H.D.
Total Harmonic Distortion : 0,007% at 85 watts output (4 Ω , 1 kHz)
Frequency Response
Phono : 20 Hz - 20 kHz ±0,5 dB (4 Ω )
CD, Tape 1, Tape 2, VCR, Video 1, Video 2 : 10 Hz - 30 kHz (±1 dB. 4 Ω )
Signal-to-Noise Ratio ('66 IHF/ '78 IHF)
Phono : 70 dB/78 dB (at Rec Out)
CD, Tape 1, Tape 2, VCR, Video 1, Video 2 : 91 dB/ 80 dB
RIAA Phono Equalization: ±0,5 dB (20 Hz - 20 kHz)
Audio Input Sensitivity/Impednace (1 kHz):
Phono : 2,0 mV/47 k Ω
CD, Tape !, Tape 2, VCR, Video 1, Video 2 : 200 mV/47 k Ω
Audio Output Level:
VCR, Tape 1, Tape 2 : 200 mV
Video Input Sensitivity/Impedance:
VCR, Video 1, Video 2 : 1 Vp-p/75 Ω
Video Output Level
VCR, Video 1, Video 2 : 1 Vp-p(at 1 Vp-p input)
Synchronization: Negative
Signal-to-Noise Ratio : 45 dB
Tuner FM Section
Tuning Range: 87,5 - 108,0 MHz
Usable Sensitivity: 10,8 dBf (0,95 µV /75 Ω )
50 dB Quieting Sensitivity
Monaural : 16,3 dBf (1,8 µV/75 Ω )
Stereo : 38,3 dBf (22,5 µV/75 Ω )
Signal-to-Noise Ratio (IHF-A Weighted)
Monaural : 80 dB at 85 dBf
Stereo : 73 dB at 85 dBf
Total Harmonic Distortion
Monaural : 0,15% at 1 kHz
Stereo : 0,2% at 1 kHz
Stereo Separation at Rec Out: 40 dB at 1 kHz
Capture Ratio: 1,5 dB
Alternate Channel Selectivity: 60 dB (±400 kHz)
Frequency Response: 30 Hz to 15 kHz (+0,5 dB -3 dB)
AM Tuner Section
Tuning Range: 530 to 1710 kHz
Usable Sensitivity: 300 µV/m (Loop antenna); 30 µV (external antenna)
Signal-to-Noise Ratio: 50 dB (100 mV/m)
General
Power Requirements: AC 120 V 60 Hz
Power Consumption: 400 watts / 550 VA; 5 watts in standby mode
Dimensions (W x H x D): 435 x 156 x 412 mm (17-3/16" x 6-3/16" x 16-1/4")
Weight: 13,6 kg (30 lbs)
No comments:
Post a Comment