The
Mordaunt-Short PAGEANT SERIES 2 offers musical reproduction of the highest
quality, a response of the utmost smoothness over the entire audible spectrum
and a clarity of detail previously associated only with professional equipment.
Incorporating
the DSB208 bass- and mid-frequency transducer, a carefully matched synthetic
dome tweeter of exceptional dispersion characteristics and independent controls
for adjustment of the acoustics balance in adverse listening conditions, the
PAGEANT SERIES 2 is thus a full frequency high performance system to be used to
advantage with compatible equipment of virtually any power rating.
Specification and Performance
Data.
Nominal Frequency Range: 25 - 25,000 Hz
Specific Frequency Response: 65 - 20,000 Hz (±3 dB)
Acoustic Balance Controls: Independent toggle
switches affording four choices of frequency response:
Mid-frequency : level or
-2 dB, 1,000 - 3,500 Hz.
High frequency : level or
-2 dB, 3,500 - 25,000 Hz.
Impedance: 8 Ω nominal. For use with
amplifiers of 4-8 Ω output impedance.
Sensitivity: 6.5 V r.m.s (5.3 watts) to produce 96 dB at 1 metre in anechoic conditions using
pink noise.
Maximum Sound Pressure Level: 110 dB in typical listening-room.
Continuous Programme Rating: 20 V r.m.s (50 watts) contoured random noise,
including transients up to 56 V
peak to peak.
Amplifier Power Compatibility: 15 - 100 watts per channel. Amplifiers of higher power may be used with
care.
Distortion: Substantally less than
1% THD within frequency range of
150 - 25,000 Hz at 6.5V r.m.s input (nominal 96 dB sound pressure level).
Fundamental System Resonance: 65 Hz.
Dividing Frequency: 3,500 Hz.
Filter
Characteristics:
Low pass : 12 dB/octave.
High pass : 18 dB/octave.
System
Design:
Resistively
loaded reflex enclosure with mid and upper frequency controls for compensation
of acoustic balance in adverse listening conditions. For use horizontally or
vertically not less than 300mm from floor.
Cabinet:
15mm
high-density board construction with internal bracing, sides wood veneered with
internal balancing veneers; rear spray finished neutral fleck.
Grille:
Acoustically
transparent, deep brown woven fabric on 9mm board frame with nylon stud
fastenings.
Cabinet
Finish:
Selected
teak or walnut veneer.
Transducers:
Bass/mid-frequency: DSB208.
High-frequency: 25 mm wide dispersion synthetic dome.
Dividing
network:
High
grade, ferrite core inductors and low-loss, close tolerance capacitors on
printed circuit board.
Electrical
Connections:
Terminal
moulding, incorporating both standard DIN socket and spring-loaded push-button
connectors for stripped wire ends. Plugs and leads supplied.
Dimensions (H x W x D):
533 x 330 x 230 mm (21" x 13" x 9")
Weight:
Single Speaker, (unpacked): 9.6 kg (21 lb 1 oz)
Per Pair, (packed): 22.25 kg (49 lb)
Nessun commento:
Posta un commento