Tannoy Dover loudspeakers

Dual Concentric Time Compensated Loudspeaker System

The famous Tannoy Dual Concentric in a modestly sized cabinet that can be floor standing on its own plinth, mounted on speaker stands or a bookshelf.

A 10-inch (254 mm) version of the Dual Concentric drive unit is used in an infinite baffle (unported) cabinet, with rigid bracing and graded acoustic foam damping, to give the best possible sound reproduction in a loudspeaker of this size.

Each Dover is supplied with a separate plinth. If used as a floor standing loudspeaker this plinth can be attached to the base of the cabinet with the screws provided. When used on stands or shelves this plinth is not required.

The Dover is designed to provide the high quality sound of the Tannoy Dual Concentric system in a size of loudspeaker to suit smaller listening rooms.

The high quality of sound reproduction is matched by the standard of cabinet construction. Every Dover is finished in genuine walnut veneers, oiled by hand and the baffle is covered in real cork.

 

The Tannoy Dual Concentric is, therefore, a true single point sound source loudspeaker system which eliminates unnatural time delay, and provides the smooth consistent intensity of sound necessary to create a precise stereo image.

 

Specifications

Recommended Amplifier Power (RMS per channel into 8 Ω ):  30 - 150 watts

Peak Power Handling:  250 watts

Impedance:  8 Ω  (Nominal):  5,5 Ω  (minimum)

Sensitivity (for 1 W at 1 m):  93 dB (domestic); 90 dB (Anechoic)

Frequency Response;  50 Hz - 20,000 Hz ±3 dB

Phase Response:  ±18° between 150 Hz - 8 kHz

Time Compensation:  better than ±20 µ sec 150 Hz - 8 kHz

Dispersion:  90° conical (including angea at -6 dB points at 10 kHz)

Crossover Frequency:  1,2 kHz

Crossover Type:  Passive, low loss, time compensated type 1040

Drive Type: 254 mm (10") Tannoy Dual Concentric high compliance type 2558

Distortion:

Less than 5% 3rd harmonic at half power 150 Hz - 20 kHz

Less than 0,6% 3rd harmonic for 85 dB 80 Hz - 20 kHz

Cabinet Type:  Infinite baffle

Cabinet Volume:  31 litres (1,1 cu.ft)

Cabinet Construction:  18 mm particle board with rigid bracing with internal damping

Finish :  Real walnut veneers

Grille :  Woven cloth over wooden frame

Dimensions (H x W x D):  580 x 310 x 285 mm (23" x 12" x 11")

System Weight:  18 kg (39,5 lb)

Shipping Weight:  20 (44 lb)

Tannoy Mercury MkII speakers

The Mercury MkII loudspeakers share the advantage of high power handling and sensitivity with low distortion and smooth frequency response - qualities which have ben the hallmark of Tannoy high fidelity loudspeaker systems for many years.

 

 Loudspeaker Enclosures

To provide optimum performance a loudspeaker cabinet must be rigidly constructed and acoustically treated. The Mercury MkII is constructed from high density particle board lined with an acoustic material to absorb internal reflections and eliminate standing waves. The cabinet is internally braced at antinodal points to minimise cabinet resonance and colouration and the narrow front profile ensures good horizontal dispersion. Low frequency loading of the system is provided by a carefully designed ducted port which reduces distortion and extends the bass response. Each loudspeaker is fitted with a detachable grille of acoustically transparent cloth stretched over a wooden frame.

 

 Drive Units

High frequencies are produced by a polyamide dome treble unit which combines a very smooth response with low distortion and wide dispersion and gives a finely detailed sound. A magnetic cooling Ferrofluid is incorporated and combines high power handling capacity with reliability and protection against sudden overload transients. The asymmetrical front plate is sculptured to improve reproduction by reducing diffraction effects.

Low and midrange frequencies are reproduced by a 200 mm polyolefin cone unit. This cone material gives a very smooth frequency response with negligible colouration. A newly developed cone/coil apex configuration provides a very rigid construction at the point where the cone is driven by the 4 layer high temperature voice coil.

 

Crossover Network

The crossover network receivers the electronical signal containing the fill frequency spectrum from the amplifier and divides it between the bass/midrange unit and the soft dome treble unit. We use only high quality components, including low loss solid dielectric capacitors and generously rated resistors and inductors. All components are hard wired and internal wiring is by heavy duty cable to minimise signal loss. All components are securely mounted to ensure maximum reliability and freedom from resonance.

 

Amplifier Power

In our loudspeaker specifications we recommend a suitable range of amplifier powers. The peak power handling capability of all Tannoy Loudspeakers will allow higher amplifier powers to be used with wide dynamic range material. Care must be taken with all amplifiers, irrespective of power output, to avoid abnormal conditions such as switch on surges or amplifier overloading (clipping and distortion) which may result in peaks of power greatly in excess of the specified ratings, and possible subsequent damage to the loudspeaker.

 

Specifications

Recommended Amplifier Power (RMS per channel into 8 Ω ):  10 - 120 watts

Peak Power Handling:  120 watts

Impedance (Nominal):  8 Ω

Sensitivity (for 1 W at 1 m):  93 dB (domestic); 90 dB (Anechoic)

Frequency Response;  52 Hz - 23,000 Hz ±3 dB

Phase Response:  better than ±45° between 120 Hz - 10 kHz

Crossover Frequency:  3 kHz

Crossover Type:  First order low pass , Second order high pass, Hard wired low loss

Apparent Acoustic Source: 59 mm behind front surface of baffle

Bass/Mid-range Unit:  200 mm (8") 2088G

Treble Unit:   28 mm (1,1") 0248G Polyamide

Horizontal Dispersion:  Greater than 150° up to 12 kHz

Cabinet Volume:  19,5 litres (0,72 cu.ft)

Cabinet Construction:  12/15 mm high density particle with 12 mm shelf brace

Bass Loading:  Overdamped offset ducted port

Cabinet Damping:  Specialist acoustic product

Grille Construction:  Acoustically transparent cloth over wooden frame

Dimensions (H x W x D):  498 x 249 x 300 mm (21,5" x 23" x 11,8")

System Weight:  7,1 kg (15,6 lb) each

Shipping Weight:  16 kg (35,2 lb) pair

 

Tannoy Venus V-30 speakers

SyncSource time compensated crossovers give realistic three dimensional images.

Soft dome tweeters for accurate high frequency performance with wide dispersion

Specially shaped acoustic matching plate provides smoother high frequency response

Heavy-duty internal wiring reduces resistance losses.

 

Polyolefin copolymer bass cone, 25 mm (1") voice coil and dust dome size matched to system characteristics, to give full uncoloured bass performance

Walnut veneered, high density particle board construction. bitumen pads and sound absorbent foam ensure a tightly damped cabinet

Performance

Power Handling:  10 -100 watts

Sensitivity:  93 dB

Size:  530 x 305 x 260 mm (21" x 12" x 10")

 

 

Tannoy Jupiter J40 speakers

 

SyncSource time compensated crossovers give realistic three dimensional images.

Soft dome tweeters for accurate high frequency performance with wide dispersion

Specially shaped acoustic matching plate provides smoother high frequency response

Heavy-duty internal wiring reduces resistance losses.

 

Polyolefin copolymer bass cone, 40 mm (1-1/2") voice coil and dust dome size matched to system characteristics, gives full bass performance without colouration

Walnut veneered, birch plywood cabinet with heavy bitumen damping, eliminates cabinet resonances.

Performance

Power Handling:  10 -120 watts

Sensitivity:  91 dB

Size:  580 x 310 x 280 mm (23" x 12" x 11")

 

Tannoy Caernarvon loudspeakers

Time Compensated Dual Concentric Loudspeaker System

Superb stereo sound  has always been a feature of the Tannoy Dual Concentric Loudspeaker. Now the latest Time Compensated Dual Concentric System take another step closer to the real thing

Designed to bring the advantages of the new Dual Concentric System to smaller living areas, the Caernarvon uses a 254 mm (10") version of the Dual Concentric in a compact Floor standing enclosure. The Two-Speakers-in-One" Dual Concentric unit provides a single axis for the generation of both high and low frequency sounds. The complementary Time Compensated crossover produces a single sound source at one point on that axis.

The Caernarvon Dual Concentric therefore, eliminates time delay distortion created by more conventional loudspeakers. A much improved stereo image results, which - due to the wider dispersion of the Dual Concentric - is more accurate over a wider area.

 

 

Careful design and tuning of the Caernarvon cabinet ensures accurate reproduction of lower frequencies to give realistic generation of bass fundamentals. The overall dimensions, however, are small enough to obtain the best acoustic ; match with even quite compact rooms.

The Caernarvon is rigidly constructed from lock - mitred high density particle board, with cross-bracing and bitumen damping of internal panels to increase strength and reduce resonance.

All outer surfaces are veneered in real walnut, and the front baffle has an original cork finish, so that the Caernarvon looks as good with the grille removed. A specially woven Oatmeal cloth is used on the grille, which is removable in three parts.

Removing the centre section of the grille gives access to the high frequency response controls, which can shape the acoustic output of the Caernarvon to suit your particular room characteristics.

 

Specifications

Peak Power Handling:  350 W

Impedance:  8 Ω  nominal

Sensitivity:  90 dB (anechoic); 93 dB (domestic)

Frequency Response:  40 Hz - 20,000 Hz ±3 dB

Phase Response:  100 Hz - 8 kHz  ±20°

Time Compensation:  better than ±18 µsec. 100 Hz - 8 kHz

Dispersion:  90° horizontal and vertical (including angle at -6 dB points at 10 kHz)

Crossover Type:  Passive low loss, time compensated type 1022

Crossover Frequency:  1,200 Hz

Crossover Controls:

Energy Shelving :  ±6 dB over 1 kHz - 20 kHz

Roll-off Slope :  +3 dB to -6 dB per octave 5 kHz - 20 kHz

Drive Type: 254 mm (10") diameter, Dual Concentric, high compliance type 2558

Distortion;

Less than 10% , 3rd harmonic at half power 100 Hz - 20 kHz

Less than 0,5% , 3rd harmonic for 85 dB 70 Hz - 20 kHz

Less than 2% , 3rd harmonic for 100 dB 70 Hz - 20 kHz

Bass Loading:  Single Ducted Port

Cabinet Construction:  18 mm high density particle board with rigid cross-bracing and bitumen damping

Finish :  Real walnut veneer, Baffle finished in hand laid cork

Grille :  3-piece detachable, Oatmeal cloth on wood frames

Cabinet Internal Volume:  73 litres

Dimensions H x W x D):  775 x 366 x 365 mm

Weight:  27,5 kg

 

Tannoy Arundel loudspeakers

Time Compensated Dual Concentric Loudspeaker System

Superb stereo sound  has always been a feature of the Tannoy Dual Concentric Loudspeaker. Now the latest Time Compensated Dual Concentric System take another step closer to the real thing

The Dual Concentric drive unit in the Arundel combines our remarkable high frequency compression driver with a 380 mm (15") bass radiator, to provide one axis along which both high and low frequency sounds are generated

Our unique new Time Compensated crossover with adjustable high frequency response, now aligns these sources at one single point on the axis.

 

 

The result is elimination of time delay distortion, with stereo images precisely located in time and space.

The original proportions of the Arundel are a result of our new research to find the optimum internal volume for realistic bass response, with cabinet dimensions that provide real improvements nin sound quality.

The narrower front baffle reduces resonance by giving a more rigid mounting for the drive unit, while the deep cabinet reduces unwanted sound reflections from the rear of the loudspeaker.

The result is a cleaner, more accurate sound for your continued listening pleasure.

The elegant styling of the Arundel has been chosen to compliment both the loudspeaker and your home. Superbly finished, selected real walnut veneers are used on the outer surfaces of the cabinet, with a warm, hand-laid cork finish to the front baffle.

Completing the distinctive appearance of the Arundel is the three-piece detachable grille, covered in acoustically transparent Oatmeal cloth specially woven for Tannoy from fine Swiss yarn.

 

Specifications

Peak Power Handling:  500 W

Impedance:  8 Ω  nominal

Sensitivity:  92 dB (anechoic); 95 dB (domestic)

Frequency Response:  32 Hz - 20,000 Hz ±3 dB

Phase Response:  90 Hz - 10 kHz  ±12°

Time Compensation:  better than ±10 µsec. 90 Hz - 10 kHz

Dispersion:  90° horizontal and vertical (including angle at -6 dB points at 10 kHz)

Crossover Type:  Passive low loss, time compensated type 1019

Crossover Frequency:  1,000 Hz

Crossover Controls:

Energy Shelving :  ±6 dB over 1 kHz - 20 kHz

Roll-off Slope :  +3 dB to -6 dB per octave 6 kHz - 20 kHz

Drive Type: 380 mm (15") diameter, Dual Concentric, high compliance type 3839

Distortion;

Less than 2% , 3rd harmonic at half power 80 Hz - 20 kHz

Less than 0,5% , 3rd harmonic for 90 dB 40 Hz - 20 kHz

Less than 2% , 3rd harmonic for 110 dB 80 Hz - 20 kHz

Less than 5% , 3rd harmonic for 113 dB 80 Hz - 20 kHz

Bass Loading:  Single Ducted Port

Cabinet Construction:  18 mm high density particle board with rigid cross-bracing and bitumen damping

Finish :  Real walnut veneer, Baffle finished in hand laid cork

Grille :  3-piece detachable, Oatmeal cloth on wood frames (replaced with black cloth)

Cabinet Internal Volume:  180 litres

Dimensions H x W x D):  1000 x 498 x 895 mm

Weight:  46 kg

 

Tannoy Balmoral loudspeakers

Time Compensated Dual Concentric Loudspeaker System

Superb stereo sound has always been a feature of the Tannoy Dual Concentric Loudspeaker. Now the latest Time Compensated Dual Concentric System take another step closer to the real thing

The Balmoral uses our 305 (12') diameter Dual Concentric drive unit, where the high frequency compression driver is mounted behind the centre of the bass-cone.. Our new Time Compensated crossover uses unique sophisticated circuity to align the high and low frequency sound sources at one point on their common axis.

Precise stereo images are, therefore, created by the Balmoral, a phase coherent Loudspeaker System which eliminates time delay distortion irrespective of you listening position.

 

 

Tannoy Loudspeakers are designed as complete systems, and so we have devoted our research to the cabinet as well as to the electronics. The subtle proportions of the Balmoral are no stylist's whim. Research has dictated these dimensions as providing the best acoustic match for our 305 mm Dual Concentric. The shape has also enabled us to mount the drive unit higher, end an reduce the colouration produced when low frequencies interact with the floor.

We use high density particle board with lock-mitre construction for greater strength, and employ rigid cross-bracing and heavy bitumen damping to reduce spurious resonances.

Unlike some loudspeakers the Balmoral will not look out of place in your home. Our specially woven grille cloth and real walnut veneers have been designed to co-ordinate well with any decor. Removing the three piece grille reveals an original styling feature - a handmade cork finished baffle with gold trims.

We realize that the acoustic characteristics of your room can sometimes affect the sound quality. We have, therefore, provided two controls, an a panel showing accurate representations of their effects, to enable you to alter the high frequency response of the Balmoral to suit your environment.

 

Specifications

Peak Power Handling:  350 W

Impedance:  8 Ω  nominal

Sensitivity:  90 dB (anechoic); 93 dB (domestic)

Frequency Response:  30 Hz - 20,000 Hz ±3 dB

Phase Response:  100 Hz - 8 kHz  ±15°

Time Compensation:  better than ±15 µsec. 100 Hz - 8 kHz

Dispersion:  90° horizontal and vertical (including angle at -6 dB points at 10 kHz)

Crossover Type:  Passive low loss, time compensated type 1020

Crossover Frequency:  1,200 Hz

Crossover Controls:

Shelving :  ±6 dB over 1 kHz - 20 kHz

Slope :  +3 dB to -6 dB per octave 5 kHz - 20 kHz

Drive Type: 305 mm (12") diameter, Dual Concentric, high compliance type 3128

Distortion;

Less than 3,5% , 3rd harmonic at half power 100 Hz - 20 kHz

Less than 0,5% , 3rd harmonic for 85 dB 70 Hz - 20 kHz

Less than 1,5% , 3 rd harmonic for 100 dB 70 Hz - 20 kHz

Less than 5% , 3rd harmonic for 110 dB 150 Hz - 20 kHz

Bass Loading:  Single Ducted Port

Cabinet Construction:  18 mm high density particle board with rigid cross-bracing and bitumen damping

Finish :  Real walnut veneer, Baffle finished in hand laid cork

Grille :  3-piece detachable, Oatmeal cloth on wood frames

Cabinet Internal Volume:  125 litres

Dimensions H x W x D):  930 x 416 x 455 mm

Weight:  37 kg

 

Tannoy Albury SL105 Surrey Speakers

The Tannoy Dual Concentric principle has long been recognised as one of the great technological breakthroughs in loudspeaker design,

Leading musicians use Tannoy Dual Concentric loudspeakers in their live performances  and many recording and broadcast studios rely on the Tannoy Dual Concentric to monitor the quality of their output. This same "monitor" standard of sound reproduction is available to yoy in the Surrey Series of Time Compensated Dual Concentric Loudspeakers from Tannoy.

Look behind the grille of any Surrey Series loudspeaker and you will see what appears to be a single drive unit. This is in fact the "2-speakers-in-One" Dual Concentric drive unit.

Operating through the centre of the bass cone, and sharing the same chassis frame, is a compression high frequency driver. These two separate drive units provide a single axis for the production of sound at all frequencies. The audio signal is supplied  to each drive unit by a time compensated crossover, that aligns both high and low  frequency sound sources towards a single point on that axis.

Each Tannoy Surrey Series loudspeakers is, therefore, a virtual Sound source. This is widely accepted as the "ideal" loudspeaker type, as all Frequencies that make up the sound you hear will originate from the same point in Space and thus maintain their correct time relationships. The music is clearer and More natural, because the real harmonics and dynamics of instruments and voices remain , while your sound image of the original performance is sharper and more convincing.

If everybody listened to music with an average audio system in an average sized room, then we would make just one type of Dual Concentric loudspeaker. Your System and listening environment, however, are as individual as you; so Tannoy Offers you the choice of five Dual Concentric loudspeakers in the Surrey Series

You can choose from the compact Esher, which uses the smallest ever Tannoy Dual Concentric with an 8" bass cone; or two larger shelf or stand Models, the Darking and the Chartsey. Should you have the space for larger free-Standing loudspeakers, then the top-of-the-range Bradley and Albury models will Give you really outstanding performance. There is a loudspeaker in the Tannoy

Surrey Series that will match your system and enable you to enjoy all the sound Advantages of the Tannoy Dual Concentric System

 

Tannoy Surrey Series loudspeakers

Features:

Free-standing single point source loudspeaker with integral stand

Dual concentric drive unit with Girdacoustic reinforced cone

Overall frame size 420 mm (16,5")

Time compensated crossover

Bass reflex cabinet with walnut veneer finish

Power handling 350 W (peak)

 

Specifications

Recommended Amplifier Power:  50 W - 250 W

Peak Power handling:  350 W

Impedance Nominal/Minimum:  8 Ω  /6 Ω

Sensitivity Domestic / Anechoic :  95 dB / 92 dB

Frequency Response:  35 Hz - 20 kHz (±3 dB)

Phase Response:  90 Hz - 10 kHz (±12°)

Time Compensation:  better than ±10 µsec 90 Hz - 10 kHz

Dispersion at -6 dB points:  90 ° included angle conical

Crossover Frequency:  1,0 kHz

Crossover Type:  8 Element passive time compensated

Drive Unit:  Tannoy Dual Concentric 3839E, High compliance, Overall frame size: 420 mm (16,5")

Distortion (90 dB at 1 m):  less than 0,5%

Bass Loading :  Offset ducted port

Cabinet Construction:  18/25 mm high density particle board

Finish:  Real Walnut veneers with solid Walnut edgings to base

Grille:  2 piece detachable , Brown cloth on wood frame

Internal Volume:  105 litres

Dimensions (W x H x D):  1000 x 500 x 380 mm (39,4" x 19,7" x 15")

Weight:  33 kg (72,8 lbs)

 

Tannoy Bradley SL65 speakers

Tannoy Surrey Series loudspeakers

Features:

Free-standing single point source loudspeaker with integral stand

Dual concentric drive unit with Girdacoustic reinforced cone

Overall frame size 343 mm (13,5")

Time compensated crossover

Bass reflex cabinet with walnut veneer finish

Power handling 300 W (peak)

 

Specifications

Recommended Amplifier Power:  0 W - 180 W

Peak Power handling:  300 W

Impedance Nominal/Minimum:  8 Ω  /6 Ω

Sensitivity Domestic / Anechoic :  93 dB / 90 dB

Frequency Response:  38 Hz - 20 kHz (±3 dB)

Phase Response:  100 Hz - 8 kHz (±12°)

Time Compensation:  better than ±15 µsec 100 Hz - 8 kHz

Dispersion at -6 dB points:  90 ° included angle conical

Crossover Frequency:  1,2 kHz

Crossover Type:  8 Element passive time compensated

Drive Unit:  Tannoy Dual Concentric 3128E, High compliance, Overall frame size: 343 mm (13,5")

Distortion (90 dB at 1 m):  less than 0,5%

Bass Loading :  Offset ducted port

Cabinet Construction:  18/25 mm high density particle board

Finish:  Real Walnut veneers with solid Walnut edgings to base

Grille:  2 piece detachable , Brown cloth on wood frame

Internal Volume:  65 litres

Dimensions (W x H x D):  880 x 410 x 380 mm (34,6" x 16,2" x 15")

Weight:  27 kg (59,5 lbs)

Tannoy Chertsey SL45 loudspeakers

 

Tannoy Surrey Series loudspeakers

Features:

Shelf or stand mounting single point source loudspeaker

Dual concentric drive unit with Girdacoustic reinforced cone

Overall frame size 343 mm (13,5")

Time compensated crossover

Bass reflex cabinet with walnut veneer finish

Power handling 300 W (peak)

 

Specifications

Recommended Amplifier Power:  0 W - 180 W

Peak Power handling:  300 W

Impedance Nominal/Minimum:  8 Ω  /6 Ω

Sensitivity Domestic ? Anechoic :  93 dB / 90 dB

Frequency Response:  42 Hz - 20 kHz (±3 dB)

Phase Response:  100 Hz - 10 kHz (±12°)

Time Compensation:  better than ±15 µsec 100 Hz - 10 kHz

Dispersion at -6 dB points:  90 ° included angle conical

Crossover Frequency:  1,7 kHz

Crossover Type:  8 Element passive time compensated

Drive Unit:  Tannoy Dual Concentric 3128E, High compliance, Overall frame size: 343 mm (13,5")

Distortion (90 dB at 1 m):  less than 0,5%

Bass Loading :  Offset ducted port

Cabinet Construction:  18/25 mm high density particle board

Finish:  Real Walnut veneers

Grille:  1 piece detachable , Brown cloth on wood frame

Internal Volume:  45 litres

Dimensions (W x H x D):  580 x 410 x 267 mm (22,8" x 16,2" x 10,5")

Weight:  16 kg (35,3 lbs)

Tannoy Darking SL35 loudspeakers

Tannoy Surrey Series loudspeakers

Features:

Shelf or stand mounting single point source loudspeaker

Dual concentric drive unit with Ferrofluid cooled HF unit

Overall frame size 287 mm (11,3")

Time compensated crossover

Bass reflex cabinet with walnut veneer finish

Power handling , 150 W (peak)

 

Specifications

Recommended Amplifier Power:  10 W - 120 W

Peak Power handling:  150 W

Impedance Nominal/Minimum:  8 Ω  /6 Ω

Sensitivity Domestic ? Anechoic :  93 dB / 90 dB

Frequency Response:  45 Hz - 20 kHz (±3 dB)

Phase Response:  110 Hz - 10 kHz (±12°)

Time Compensation:  better than ±30 µsec 110 Hz - 10 kHz

Dispersion at -6 dB points:  90 ° included angle conical

Crossover Frequency:  1,8 kHz

Crossover Type:  8 Element passive time compensated

Drive Unit:  Tannoy Dual Concentric 2588, High compliance, Overall frame size: 287 mm (11,3")

Distortion (90 dB at 1 m):  less than 0,5%

Bass Loading :  Offset ducted port

Cabinet Construction:  18/25 mm high density particle board

Finish:  Real Walnut veneers

Grille:  1 piece detachable , Brown cloth on wood frame

Internal Volume:  35 litres

Dimensions (W x H x D):  520 x 360 x 267 mm (20,5" x 14,2" x 10,5")

Weight:  13 kg (28,7 lbs)

 

Tannoy Esher SL25 loudspeakers

Features:

Shelf or stand mounting single point source loudspeaker

Dual concentric drive unit with Ferrofluid cooled HF unit

Overall frame size 236 mm (9,3")

Time compensated crossover

Bass reflex cabinet with walnut veneer finish

Power handling , 120 W (peak)

 

Specifications

Recommended Amplifier Power:  10 W - 100 W

Peak Power handling:  120 W

Impedance Nominal/Minimum:  8 Ω  /6 Ω

Sensitivity Domestic ? Anechoic :  93 dB / 90 dB

Frequency Response:  52 Hz - 20 kHz (±3 dB)

Phase Response:  120 Hz - 10 kHz (±12°)

Time Compensation:  better than ±30 µsec 110 Hz - 10 kHz

Dispersion at -6 dB points:  90 ° included angle conical

Crossover Frequency:  1,8 kHz

Crossover Type:  8 Element passive time compensated

Drive Unit:  Tannoy Dual Concentric 2008S, High compliance, Overall frame size: 236 mm (9,3")

Distortion (90 dB at 1 m):  less than 1%

Bass Loading :  Offset ducted port

Cabinet Construction:  18/25 mm high density particle board

Finish:  Real Walnut veneers

Grille:  1 piece detachable , Brown cloth on wood frame

Internal Volume:  25 liters

Dimensions (W x H x D):  460 x 320 x 267 mm (18,1" x 12,6" x 10,5")

Weight:  12 kg (26,5 lbs)

 

Tannoy D900 loudspeakers

 

Definition from Tannoy. The true audiophile technology to convince you.

In nature, all sounds start from a single point, with waves radiating out evenly in every direction. Tannoy’s Dual Concentric™ technology emulates this by placing the tweeter directly behind the bass cone, so again the sound comes from a single point and all frequencies reach your ear simultaneously.

 

D900 Spectacular performance from the flagship Definition model. Enormous power handling capability with astonishing impact and yet capable of portraying all of the subtlety and emotion of music and film sound tracks even at low listening levels.

 

 

Specifications

Recommended Amp. Power :  30 -300 Watts

Peak Watts Power Handling:  450

Sensitivity (2.8 Volts @ 1 metre):  94 dB

Nominal Impedance:  6 ohms

Frequency Response:  28 Hz - 30,000 Hz ±3 dB

Driver Configuration

Cast Chassis Dual Concentric  Drive Unit:  300 mm

Supplementary Cast Chassis Bass Unit:  300 mm

Cabinet

Enclosure Type:  Resistively ported reflex

Dimensions (H x W x D):  1145 x 428 x 464 mm

Weight:  57 kg

Finish:  All Definition models available in American Cherry or Rosewood with Black Jersey weave grille cloth over non diffraction tooled frame

Tannoy D700 loudspeakers

 

D700 Imposing floor standing model for large rooms. The D700 is capable of generating the full scale and impact of live music. Stunning performance when used as the main pair in a high quality home theatre system.

 

Definition speakers are uniquely equipped to succeed, featuring as they do Tannoy’s patented Dual Concentric™ drive unit technology. The rigidity of the die-cast chassis combined with the oversized magnet assembly ensures this drive unit provides reliable, effortless performance.

Not only do the real wood veneer cabinets look great, but the multi-faceted design play their part in enhancing the acoustic performance. Non-parallel side panels help break up standing waves within the cabinet, minimising colouration and interference from panel resonance. Even at high volumes, the result of all this is superb musical dynamics with low distortion and crisp, pinpoint stereo imaging. The musical truth, the whole truth and nothing but the truth.

 

Specifications

Recommended Amp. Power :  30 -200 Watts

Peak Watts Power Handling:  300

Sensitivity (2.8 Volts @ 1 metre):  93 dB

Nominal Impedance:  6 ohms

Frequency Response:  35 Hz - 30,000 Hz ±3 dB

Driver Configuration

Cast Chassis Dual Concentric  Drive Unit:  254 mm

Supplementary Cast Chassis Bass Unit:  254 mm

Cabinet

Enclosure Type:  Resistively ported reflex

Dimensions (H x W x D):  990 x 374 x 367 mm

Weight:  41 kg

Finish:  All Definition models available in American Cherry or Rosewood with Black Jersey weave grille cloth over non diffraction tooled frame