Toshiba SS-47 loudspeakers

3-way concave speaker system

3-step tweeter/mid-range tone control

Terminals for electronic cross-over multi-channel system

Natural walnut cabinet with removable grill panel

Specifications

Enclosure:  Infinite Baffle type

Mounted Speakers:

Woofer :  300 mm (12") concave

Mid-range :  120 mm (5") concave

Tweeter :  25 mm (1") dome

Frequency Range:  35 - 20,000 Hz

Crossover Frequency:  700 Hz (Low/Mid-range);  7,000 Hz (Mid/High)

Power Handling Capacity:  50 W Max.

Impedance:  8 Ω

Sensitivity:  93 dB /IEC

Fundamental resonance Frequency:  60 Hz

Timber Control:  Tweeter/Mid-range 3-step ±3 dB

Multi-amp. Connection:  2 & 3 way

Front Panel:  removable 

Dimensions (W x H x D):  400 x 680 x 330 mm (15-3/4" x 26-3/4" x 13")

Weight: 15 kg (33 lbs)

Toshiba SS-37 loudspeakers

3-way speaker system

3-step tweeter/midrange tone control

Terminals for electronic cross-over multi-channel system

Natural walnut cabinet with removable grill panel

Specifications

Enclosure:  Infinite Baffle type

Mounted Speakers:

Woofer :  200 mm (8") concave

Mid-range :  120 mm (5") concave

Tweeter :  25 mm (1") dome

Frequency Range:  40 - 20,000 Hz

Crossover Frequency:  700 Hz (Low/Mid-range);  7,000 Hz (Mid/High)

Power Handling Capacity:  40 W Max.

Impedance:  8 Ω

Sensitivity:  92 dB /IEC

Fundamental Resonance Frequency:  65 Hz

Timber Control:  tweeter/Mid-range 3-step ±3 dB

Dimensions (W x H x D):  342 x 590 x 295 mm (13-7/16" x 23-1/4" x 11-5/8")

Weight: 10 kg (22 lbs)

Toshiba SS-27 speakers

2-way speaker system

3-way high frequency level control

Mellow walnut cabinet with removable grill panel

Specifications

Enclosure:  Infinite Baffle type

Mounted Speakers:

Woofer :  200 mm (8") concave

Tweeter :  25 mm (1"0 dome

Frequency Range:  45 - 20,000 Hz

Crossover Frequency:  7,000 Hz

Power Handling Capacity:  30 W Max.

Impedance:  8 Ω

Sensitivity:  93 dB /IEC

Fundamental resonance Frequency:  85 Hz

Timber Control:  High 3-step ±3 dB

Dimensions (W x H x D):  300 x 500 x 252 mm (11-13/16" x 19-11/16" x 10")

Weight: 6 kg (13- 1/4 lbs)

Toshiba PT-490 cassette tape deck

 Toshiba – Now you can record on a Dolby cassette deck for 2 straight hours without flipping the tape.

Recording Beethoven’s  4th, 5th and 6th on one continuous taping. Or playing a two hour tape of The Beatles without even being in the same room. Or catching yourself in duet with Brubeck and not having to stop flip the tape. Well, if your cassette deck is a Toshiba PT-490 with the automatic reverse feature it’s easy.

Just set the Mode dial and the machine knows exactly what you want it to do. Whether you want it to record one side of the tape and then stop. Or play and turn itself off. Or record both sides of the tape for two uninterrupted hours. Or play back the same tape indefinitely. The machine does it all for you. And it does it automatically.

In addition to reversing its own tape, the PT-490 also gives you outstanding performance and sound. That’s because it comes with Dolby noise reduction. Mechanical auto shut-off. Separate record and playback volume controls. Two large, illuminated VU-meter. And a bias selector switch for normal, hi-fi and CrO₂ tape. And it’s one more example of the fine craftsmanship that goes into all Toshiba products.

Stereo Cassette deck

Features

Dolby noise reduction for improving Signal-to-Noise-Ratio as much as 10 dB

Mechanical automatic shut off prevents tape and mechanism damage

Tape counter for easy and simple tape indexing

3-step tape selector permits suitable bias level and appropriate frequency compensation for any kind of tape

Push-to-start/push-to-release type pause-control for recording level preset, preventing waste of tape when recording

Playback volume control gives suitable output level to any amplifier

Large and illuminated level-meter for easy monitoring of level

Automatic reverse system

Specifications

Usable Tape:  Compact cassette

Tape Speed:  4,8 cm/s (1-7/8 ips)

Track/Channel :  4-track / 2-channel stereo

Bias and Erasure:  AC 85 kHz

Input Jack:  Microphone, Line-input, DIN

Output Jack:  Line-output, Stereo headphone, DIN

Motor:  4-pole synchronous motor

Controls:  Slide volume (REC, playback), tape selector (Normal, HiFi, Special), mode selector (Non-reverse, reverse, repeat), power switch, Dolby system switch

Operations:  Piano type push button (reverse, REC, REW, Play, F.F., Stop, Cassette-up, pause)

Auxiliary Device:  Auto-reverse, auto-shut off, Dolby noise reduction, lighted 2-VU meters, 3-digit tape counter

Performance

Output Level/Impedance:  0 - 1 V/ 2 k Ω

Frequency Response:  30 - 15,000 Hz

Tape Speed Tolerance:  ±1%

Wow and Flutter:  0,1% WRMS

CrossTalk:  60 dB

Channel Separation::  35 dB

Signal-to-Noise-Ratio:  50 dB or 60 dB (with Dolby noise reduction) at 10 kHz, 50 dB or 55 dB at full spectrum

Erasure:  65 dB

Input Level/Impedance

Line-in :  80 mV/680 k Ω

DIN IN :  0m,56 mV/5 k Ω

Mic:  0,56 mV/ 10 kΩ

FF Time:  105 sec. (C-60 cassette)

Rewind Time:  105 sec. (C-60 cassette) 

General

Power Source:  AC 100/120/220/240 V, 50 or 60 Hz

Dimensions (W x H x D)::  425 x 140 x 290 mm (16-7/8" x 5-1/2" x 11-1/2")

Weight:  8 kg (18 lbs)

Accessory:  Patch cord, C-30C pre-recorded cassette, 

Toshiba PT-470 cassette deck

 Stereo Cassette deck PT-470

Features

Dolby noise reduction for improving Signal-to-Noise-Ratio as much as 10 dB

Mechanical automatic shut off prevents tape and mechanism damage

Tape counter for easy and simple tape indexing

3-step tape selector permits suitable bias level and appropriate frequency compensation for any kind of tape

Push-to-start/push-to-release type pause-control for recording level preset, preventing waste of tape when recording

Playback volume control gives suitable output level to any amplifier

Large and illuminated level-meter for easy monitoring of level

Specifications

Usable Tape:  Compact cassette

Tape Speed:  4,8 cm/s (1-7/8 ips)

Track/Channel :  4-track / 2-channel stereo

Bias and Erasure:  AC 85 kHz

Input Jack:  Microphone, Line-input, DIN

Output Jack:  Line-output, Stereo headphone, DIN

Motor:  4-pole synchronous motor

Controls:  Slide volume (REC, playback), tape selector (Normal, HiFi, Special), power switch, Dolby system switch, Dolby system switch

Operations:  Piano type push button (REC, REW, Play, F.F., Stop, Cassette-up, pause)

Auxiliary Device:  Auto-shut-off, Dolby noise reduction, lighted 2-VU meters, 3-digit tape counter

Performance

Output Level/Impedance:  0 - 1 V/ 2 k Ω

Frequency Response:  30 - 15,000 Hz

Tape Speed Tolerance:  ±1%

Wow and Flutter:  0,1% WRMS

CrossTalk:  60 dB

Channel Separation::  35 dB

Signal-to-Noise-Ratio:  50 dB or 60 dB (with Dolby noise reduction) at 10 kHz, 50 dB or 55 dB at full spectrum

Erasure:  65 dB

Input Level/Impedance

Line-in :  80 mV/680 k Ω

DIN IN :  0m,56 mV/5 k Ω

Mic:  0,56 mV/ 10 kΩ

FF Time:  105 sec. (C-60 cassette)

Rewind Time:  105 sec. (C-60 cassette) 

General

Power Source:  AC 100/120/220/240 V, 50 or 60 Hz

Dimensions (W x H x D):  425 x 140 x 290 mm (16-7/8" x 5-1/2" x 11-1/2")

Weight:  8 kg (18 lbs)

Accessory:  Patch cord, C-30C pre-recorded cassette, 

Toshiba KT-805 8-track deck

8-Track Record/Playback Deck, features:

8-track stereo recording device

Convenient automatic shut off mechanism

Repeat button for repeat reproduction of same channel

Fast forward, four times faster than recording speed

Push-button cartridge ejection for easy cartridge removal

Professional slide type level controls

Large, easy-to-see, accurate level meter.

 

Specifications

Usable Tape:  8-track cartridge

Tape Speed:  9,5 cm/sec. (3-3/4 ips)

Track and Channel:  8 tracks, 2 channels

Bias and Erasure:  AC 60 kHz

Input Jack:  Microphone, Line-in, DIN

Output Jack:  Line-out, Stereo headphone, DIN

Motor: Long life DC motor

Frequency Response:  50 - 10,000 Hz

Wow and Flutter:  0,15% WRMS

Crosstalk:  55 dB

Channel Separation:  50 dB

Signal-to-Noise Ratio:  45 dB

Erasure:  55 dB

Input Level/Impedance:

Line-in :  0,1 mV/1 M Ω

DIN-in :  10 mV/100 k Ω

MIC :  0,5 mV/10 k Ω

Output Level/Impedance

Line-out :  0,5 V/10 k Ω

DIN-out :  o,5 V/10 K Ω

Headphone:  0,2 mW/8 Ω

FF Time:  9,5 cm/sec. X3

Controls:  Slide recording level, power switch

Operations:  F.F., Repeat, Eject, Program Select

Auxiliary Device:  2-recording level meter

Semiconductors:  10 Transistors; 8 Diodes

Power Requirements:  AC 100/120/220/240 V, 50/60 Hz

Dimensions (W x H x D):  391 x 139 x 255 mm (15-3/8" x 5-1/2" x 10")

Weight:  5,8 kg (12-13/16 lbs)

 

Toshiba KT-403D cassette deck

 

Stereo cassette deck, features:

All silicon transistorized circuitry, including push-pull bias oscillator expand frequency characteristics

Noise suppress switch for noise-free reproduction

Quiet 4-pole hysteresis synchronous motor insures stabilized revolution

Tape counter simplifies indexing

Large twin VU meters aid in monitoring recording level

Slide volume controls improve operating ease.

 

Specifications

Usable Tape:  Compact cassette

Track and Channel: 4-track, stereo/monaural

Tape Speed: 4,8 cm/sec (1-7/8 ips)

Bias and Erasure:  AC 55 kHz

Input Jack:  Line-input, DIN, Mic

Output Jack :  Line-output, Headphones, DIN

Motor:  4-pole hysteresis synchronous motor

Output Level/Impedance:  0,5V/10 K Ω

Frequency Response:  50 - 10,000 Hz

Tape Speed Tolerance:  +2%, -1%

Wow and Flutter:  0,25% WRMS

Signal-to-Noise Ratio:  40 dB

Erasure:  55 dB

Input Level/Impedance:

Mic :  -65 dB /10 K Ω

Line-in :  -20 dB/1 m Ω

FF Time:  120 sec. (C-60)

Rewind Time:  80 sec. (C-60)

Controls:  Power switch, volume control, noise suppression switch, cassette up, REC

Operations:  Rotary (Play, Stop, Rew, F.F.)

Auxiliary Device:  2-VU meter, 3-digit tape counter

Semiconductors:  11 Transistors; 6 Diodes

Power Requirements:  AC 100/120/220/240 V, 50/60 Hz

Cabinet:  Natural walnut

Dimensions (W x H x D):  300 x 105 x 200 mm (11-13/16" x 4-1/8" x 7-7/8")

Weight:  2,5 kg (5,5 lbs)

 

Toshiba SA-504 4-ch receiver

4-channel FM/AM/FM Stereo receiver, features:

BTL circuit (53 W x 2,8 rms, 8 Ω , 0,8%)

ITL-OTL-OCL pure complementary symmetry circuit

MOS FETs FM front end

4-gang linear frequency FM tuning condenser and tuned RF AM section

Built-in condenser cartridge equalizing circuit

Built-in QM and SQ 4-channel matrix decoder

CD-4 4-channel adaptor terminals

Black dial

Natural Walnut cabinet

 

Specifications

FM Tuner Section

Tuning Range :  88 - 108 MHz

Sensitivity: 1,8 µV (IHF)[1,8 µV, S/N=30 dB]

Signal-to-Noise Ratio:  66 dB

Capture Ratio:  1,5 dB

Image Rejection:  60 dB

IF Rejection:  80 dB

Spurious Rejection:  100 dB

AM Suppression:  50 dB (IHF)

Frequency Response:  20 - 15,000 Hz ±1 dB

Harmonic Distortion:

Mono :  0,2% at 400 Hz (100% modulation)

Stereo :  0,5% at 400 Hz (100% modulation)

FM Stereo Separation:  35 dB at 1,000 Hz

19 kHz, 38 kHz Suppression:  50 db

AM Tuner Section

Tuning Range:  530 - 1605 kHz

Sensitivity :  15 µV (IHF)

Signal-to-Noise Ratio:  45 dB

Selectivity :  30 dB (±10 kHz)

Overload :  2 V/m at 1,000 Hz

IF Rejection:  70 dB

Harmonic Distortion :  1 %

Audio Section

Power Output:  30 W x 4 (rms 0,4%, 8 Ω , each channel driven) or 53 W x 2 (at BTL connection, rms 0,4%, 8 Ω , each channel driven)

Frequency Response:  20 - 40,000 Hz 12 dB

Power bandwidth:  10 - 80,000 Hz (IHF, 0,4%)

Signal-to-Noise Ratio

Phono :  65 dB

Aux :  80 dB

Input Sensitivity/Impedance (for rated output):

Phono :  2,5 mV/47 K Ω

CC :  30 mV/70 k Ω

Aux :  160 mV/47 K Ω

Tape :  160 mV/47 K Ω 

Damping Factor:  20 at 8 Ω

Tone Control:  ±10 dB at 100 Hz and/or 10 kHz

High Cut Filter:  6 dB /oct, fc = 9000 Hz

Low Cut Filter:  6 dB/oct, fc = 30 hz

Residual Noise:  1,5 mV or less

Loudness Control:  +10 dB (ay 100 Hz); +4 dB (at 10 kHz)

Total Control

Volume :  4-gang, co-axial

Tone Control : Bass and treble for each Front and Rear channel :  4-gang, co-axial

Balance :  4 (discrete)

Selector :  AM/FM auto/Phono/Aux 1 (4-ch)/ Aux 2 (4-ch)

Mode :  Mono/Stereo/4-ch 1 (QM)/4-ch 2 (SQ)/4-ch 3 (discrete)

Power/ Speaker Switch :  PWR Off/A (4-ch)/SP Off ]/B (2-ch)/A+B

Accessory Switch :  CC/Mag; Tape monitor, FM muting, Loudness, AFC, audio mute; Hi/Lo cut

Antenna

FM :  300/75 Ω  terminals

AM :  Ferrite core antenna, external antenna terminals

Connector :  Aux (4-ch), Phono (Mag/CC), Rec /P.B. (4-ch), 2-AC outlet, Headphone (frontand rear) pre-out/main-in

Accessory Circuit:  Circuit breaker for final stage FM muting, audio muting, signal strength meter, center-zero meter

Semiconductors:  5 ICs; 3 FET, 38 Transistors; 24 Diodes

Power Requirements:  AC 100/120/220/240 V, 50/60 Hz

Cabinet:  Natural walnut

Dimensions (W x H x D):  508 x 125 x 356 mm (20" x 4-7/8" x 14")

Weight:  15 kg (33 lbs)

 

Toshiba SA-304 4-ch receiver

4-channel FM/AM/FM Stereo receiver, features:

BTL circuit (20 W x 2 rms, 8 Ω , 0,8%)

IC power output section

MOS FETs FM front end

Built-in QM 4-channel matrix decoder

CD-4 4-channel adaptor terminals

Black dial

 

Specifications

Tuner Section

Tuning Range

FM :  88 - 108 MHz

AM :  530 - 1605 kHz

Sensitivity:

FM :  2,5 µV (IHF)

AM :  20 µV (IHF)

Signal-to-Noise Ratio

FM :  62 dB

AM :  45 dB

Capture Ratio:  2,5 dB

Image Rejection:

FM :  55 dB

AM :  35 dB

IF Rejection:

FM :  60 dB

AM :  30 dB

AM Suppression (FM):  35 dB

FM-ST Separation:  30 dB at 1000 Hz

Audio Section

Power Output:  10 W x 4 (4-ch), 20 W x 2 (BTL) rms each channel driven , 8 Ω , 0,8%

Frequency Response:  20 - 40,000 Hz ±2 dB

Power bandwidth:  20 - 30,000 Hz (IHF, 0,8%)

Signal-to-Noise Ratio

Phono :  60 dB

Aux :  70 dB

Input Sensitivity/Impedance (for rated output):

Phono :  3,0 mV/200 K Ω

CC :  30 mV/70 k Ω

Aux :  200 mV/100 K Ω

Damping Factor:  26 at 8 Ω

Tone Control:  ±10 dB at 100 Hz and/or 10 kHz

Residual Noise:  0,8 mV

Loudness Control:  +10 dB (ay 100 Hz); +4 dB (at 10 kHz)

Total Control

Volume :  4-gang, co-axial

Bass :  4-gang, co-axial

Treble :  4-gang, co-axial

Balance :  4 (discrete)

Selector :  AM/FM auto/Phono/Aux (4-ch)

Mode :  Mono/Stereo/4-ch 1 (QM)/4-ch 2 (SQ)/4-ch 3 (discrete)

Power/ Speaker Switch :  PWR Off/A (4-ch)/SP Off ]/B (2-ch)

Accessory Switch :  Tape monitor, 4-speaker/BTL, FM mute

Antenna

FM :  300/75 Ω  terminals

AM :  Ferrite core antenna, external antenna terminals

Indicator:  FM-ST indicator; F/AM tuning meter

Semiconductors:  5 ICs; 3 FET, 38 Transistors; 24 Diodes

Power Requirements:  AC 100/120/220/240 V, 50/60 Hz

Cabinet:  metal cabinet

Dimensions (W x H x D):  400 x 125 x 290 mm (15-3/4" x 4-7/8" x 11-3/8")

Weight:  8,2 kg (18 lbs)

 

Toshiba PT-862 open reel deck

 

Stereo Tape Deck PT-862

Features:

3-head system permits either tape or source monitoring and echo recording

Mechanical automatic shut off and easy tape loading mechanism

Tape selector switch and recording bias control

Sound on sound system 4-digit tape counter

Playback volume

 

Specifications

Usable Tape:  Open reel tape , up to 7"

Tape Speed:  19 cm/sec. (7-1/2 ips); 9,5 cm/sec. (3-3/4 ips); 4,8 cm/sec. (1-7/8 ips)

Track and Channel:  4-track, 2-channel stereo record and playback

Bias and Erasure:  AC, 85 kHz

Input Jack:  Microphone, Line, DIN

Output Jack:  headphone, Line, DIN

Motor:  4-pole condenser motor

Output Level/Impedance:  0 - 1 V (Variable) / 500 Ω 

DIN :  0,5 V / 6,8 k Ω

Frequency Response:  50 - 20,000 Hz

Tape Speed Tolerance:  ±1%

Wow and Flutter:  0,09% WRMS

Crosstalk:  60 dB

Channel Separation:  55 dB

Signal-to-Noise Ratio:  56 dB

Erasure:  65 dB

Input level/Impedance:

Mic :  -65 dB / 10 k Ω

Line-in :  -23 dB / 820 k Ω

FF Time:  180 sec. (7" 100% tape)

Rewind Time:  180 sec. (7" 100% tape)

Controls:  Tape selector switch, speed change, power switch, volume control, mode selector

Operations: Rotary (Play, Stop, F.F., REW.); Pause

Auxiliary Devices:  4-digit tape counter, easy loading mechanism, recording bias control

Power Source: AC 100/110/120/200/220/240 V, 50 or 60 Hz

Dimensions (W x H x D):  390 x 355 x 186 mm (15-5/16" x 12-1/4" x 7-3/8")

Weight:  12 kg (26 -7/16 lbs.)

Toshiba PT-866 open reel deck

Features:

3-head system permits either tape or source monitoring and echo recording

Mechanical automatic shut off and easy tape loading mechanism

Tape selector switch and recording bias control

Sound on sound system

4-digit tape counter

Playback volume

 

Specifications

Usable Tape:  Open reel tape , up to 7"

Tape Speed:  19 cm/sec. (7-1/2 ips); 9,5 cm/sec. (3-3/4 ips); 4,8 cm/sec. (1-7/8 ips)

Track and Channel:  4-track, 2-channel stereo record and playback

Bias and Erasure:  AC, 85 kHz

Input Jack:  Microphone, Line, DIN

Output Jack:  headphone, Line, DIN

Motor:  4-pole condenser motor

Output Level/Impedance:  0 - 1 V (Variable) / 500 Ω 

DIN :  0,5 V / 6,8 k Ω

Frequency Response:  50 - 20,000 Hz

Tape Speed Tolerance:  ±1%

Wow and Flutter:  0,09% WRMS

Crosstalk:  60 dB

Channel Separation:  55 dB

Signal-to-Noise Ratio:  56 dB

Erasure:  65 dB

Input level/Impedance:

Mic :  -65 dB / 10 k Ω

Line-in :  -23 dB / 820 k Ω

FF Time:  180 sec. (7" 100% tape)

Rewind Time:  180 sec. (7" 100% tape)

Controls:  Tape selector switch, speed change, power switch, volume control, mode selector

Operations: Rotary (Play, Stop, F.F., REW.); Pause

Auxiliary Devices:  4-digit tape counter, easy loading mechanism, recording bias control

Power Source: AC 100/110/120/200/220/240 V, 50 or 60 Hz

Dimensions (W x H x D):  400 x 440 x 222 mm (15" x 16-1/4" x 8-3/4")

Weight:  15 kg (33 lbs.)

 

Toshiba SA-500 receiver

Stereo Receiver Toshiba SA-500 Features:

2-channel FM/AM/FM stereo receiver

Pure-complementary symmetry circuit, OCL output section with balanced two power supply circuit

Coupling condenserless main amplifier

ICs for IF, equalizer and tone control amplifier circuit to assure uniformity of performance between the set

4-gang linear scale tuning condenser for FM

Equalization amplifier for condenser cartridge

MFR tone control with switch-selected hinge points

2 FET's at FM front end

Wood cabinet

 

Specifications

Tuner Section

FM Tuning Range:  88 - 108 MHz

Sensitivity:  1,8 µV 300 Ω  (IHF)

Signal-to-Noise Ratio:  66 dB

Capture Ratio:  1,5 dB (IHF)

Selectivity:  80 dB

Image Rejection:  80 dB

IF Rejection:  80 dB

Spurious Rejection:  100 dB

AM Suppression:  50 dB (IHF)

Frequency Response:  20 - 15,000 Hz ±1 dB

T.H.D.

Mono :  0,2% at 400 Hz, 100% modulation

Stereo :  0,5% at 400 Hz, 100% modulation

FM Stereo Separation:  35 dB at 1,000 Hz

19 kHz, 38 kHz Suppression:  50 db

SCA Rejection:  50 dB

Antenna Terminals:  300 Ω  / 75 Ω 

AM Tuning Range:  530 - 1605 kHz

Sensitivity:  15 µV (IHF)

Signal-to-Noise Ratio:  45 dB

Image Rejection:  70 dB

Selectivity:  30 dB (+10 kHz)

IF Rejection:  70 dB

Over Load:  126 dB (µV) at 1,000 kHz

Total Harmonic Distortion:  1%

Antenna:  Ferrite core antenna, external antenna terminals

Audio Section

Total Music Power (0,4%) :  30 W (4 Ω ); 90 W (each channel driven at 8 Ω )

Total Continuous Power (0,4%) :  70 W (each channel driven at 8 Ω );

Total Harmonic Distortion:  0,4% (at rated or less output)

Frequency Response:  20 - 40,000 Hz ±1 dB (Aux, Input)

Power Bandwidth:  8 - 80,000 Hz (IHF, 0,4%)

Signal-to-Noise Ratio

Phono :  65 dB

Aux :  75 dB

Input Sensitivity/Impedance (for rated output)

Phono :  2,5 mV/47 k Ω (CC 40 mV/70 k Ω )

Tape Play :  150 mV/100 k Ω 

Aux :  150 mV/100 k Ω

Damping Factor:  20 at 8 hm

Tone Controls:

Bass :  ±10 dB at 100 Hz

Treble :  ±10 dB at 10 kHz

Loudness:  +10 dB at 100 Hz, +4 dB at 10 kHz

Residual Noise:  0,8 mV at 8 Ω 

Speaker Impedance:  from 4 Ω  to 16 Ω 

General Section

Controls:  Volume, bass, treble, balance, selector AM/FM-mono / FM-auto / Phono MAG-CC / Aux; Mode Rev/Stereo/L/R/L+R' FM muting, Tape monitor, AFC, 2-ch/4-ch, Loudness, MFR, Tuning

Connector :  13 PIN jack, 2-speaker terminal, 2-AC outlet; DIN connector,  FM-AM antenna connection, headphone jack

Indicator:  FM-ST indicator, FM/AM tuning meter

Semiconductors:  3 ICs; 5 FET, 51 Transistors; 29 Diodes

Power Requirements:  AC 100/120/220/240 V, 50/60 Hz

Cabinet:  natural walnut  cabinet

Dimensions (W x H x D):  450 x 125 x 356 mm (17-5/8" x 4-7/8" x 14")

Weight:  9,5 kg (21 lbs)

 

Toshiba SA-400 receiver

Features:

2-channel FM/AM/FM stereo receiver

IC power output section

FET FM front end

MFR tone control with switch-selected hinge points

 

Specifications

Tuner Section

FM Tuning Range:  88 - 108 MHz

Sensitivity:  2,5 µV 300 Ω  (IHF)

Capture Ratio:  2 dB (IHF)

Selectivity:  60 dB

Image Rejection:  50 dB

IF Rejection:  80 dB

Spurious Rejection:  40 dB

FM Stereo Separation:  35 dB

SCA Rejection:  50 dB

Antenna Terminals:  300 Ω  / 75 Ω 

AM Tuning Range:  530 - 1605 kHz

Sensitivity:  20 µV (IHF)

Image Rejection:  35 dB

IF Rejection:  30 dB

Antenna:  Ferrite core antenna, external antenna terminals

Audio Section

Power Output (each channel driven, Total):

Music Power (IHF) at 0,8% distortion :  30 W (4 Ω ); 37 W (8 Ω ); 20 W (16 Ω )

Continuous Power at 0,8% distortion :  22 W (4 Ω ); 30 W (8 Ω ); 17 W (16 Ω )

Frequency Response:  20 - 40,000 Hz -3 dB

Power Bandwidth:  20 - 40,000 Hz (IHF, 0,8%)

Signal-to-Noise Ratio

Phono :  65 dB

Aux :  75 dB

Input Sensitivity/Impedance (for rated output)

Phono :  3,0 mV/47 k Ω

Aux :  200 mV/100 k Ω

Tape :  200 mV/100 k Ω

Hum

Phono :  50 mV

Aux :  10 mV

Damping Factor:  26 at 8 hm

Tone Controls:

Bass :  ±10 dB at 100 Hz

Treble :  ±10 dB at 10 kHz

Loudness:  +10 dB at 100 Hz

Residual Noise:  0,8 mV at 8 Ω 

General Section

Controls:  Volume, bass, treble, balance, selector AM/FM-mono / FM-auto / Phono / Aux

Connector :  Phono; Aux, inputs (phono jack); tape input and output via PIN jacks and parallel, single-connection 5-pin DIN jack; screw terminals for main speakers plus screw terminals for extension speakers; headphone jack; unswitched AC outlet; 300 Ω  and 75 Ω  FM antenna connection; input and output for 4-channel adaptor

Indicator:  FM-ST indicator, FM/AM tuning meter

Semiconductors:  5 ICs; 1 FET, 7 Transistors; 10 Diodes

Power Requirements:  AC 100/120/220/240 V, 50/60 Hz

Cabinet:  Walnut finished wood cabinet

Dimensions (W x H x D):  420 x 125 x 285 mm (16-1/2" x 4-7/8" x 11-1/4")

Weight:  8,2 kg (18 lbs)

 

Toshiba SC-410 amplier

4-channel QM Decoder/Amplifier

Features:

Decodes almost any type of encoded matrix 4-channel discs at four modes of 4-channel effect

Decodes 4-channel programs from ordinary non-encoded discs into quasi-quadraphonic stereo sound

Built-In IC power amplifier for two sets of rear channel speaker systems

Connectable to any type of stereo amplifier furnishing DIN socket and PIN "pre-out/in" jack

 

Specifications

Power Output:  30 W rms into 8 Ω  at 0,8% T.H.D.

Frequency Response:  20 - 40,000 Hz (exclude QM section)

Power Bandwidth:  20 - 40,000 Hz (exclude QM section)

Semiconductors: 

2 Transistors for AF amplifier;

1 Diode for power supply;

2 ICs (TH-9015P's) for power output section;

4 FET's and 4 Transistors for QM decoder

Control:

Main volume, sub volume, selector 2-ch/4-ch/tape/aux; Power off; speaker A & B, QM effect (concert hall/studio/surround/stage0; Hi-cut

Jack and Terminals:

DIN socket, input/output jack, AC unswitched outlet, speaker terminal

Dimensions (W x H x D):  300 x 115 x 385 mm (11-3/4" x 4-1/2" x 15")

Weight:  6 kg (13-1/4 lbs)