What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59

Luxman LV-113 amplifier

This integrated amplifier has been designed for highest sonic purity. Triple Darlington outputs and driver topology, optical and coaxial direct digital inputs with built-in DAC. 4 fold oversampling filter, high current high power output into low impedance loads, massive power supply and heatsink designs, all contribute to the achievement of this goal.

Rated Output Power
70 W + 70 W at 8 Ω (20 Hz - 20 kHz)
85 W + 85 W at 8 Ω (1 kHz)
80 W + 80 W at 6 Ω (20 Hz -20 kHz)
Dynamic Power:
90 W + 90 W at 8 Ω
150 W + 150 W at 4 Ω
190 W + 190 W at 2 Ω
Total Harmonic Distortion (8 Ω, 70 W)
From 20 Hz to 20 kHz :  0,03%
At 1 kHz :  0,006%
Intermodulation Distortion ( 8 Ω, 60 Hz : 7 kHz - 4 : 1):  0,008% ( 70 W)
Input Sensitivity/Impedance
Phono (MM) :  2,5 mV/50 k Ω
CD, Tuner, LD/VHD, Tape 1-2 :  150 mV/40 k Ω
Signal-to-Noise Ratio (A-weighted, Input Shorted)
Phono (5 mV Input) :  87 dB
CD, Tuner, LD/VHD, Tape 1-2 :  105 dB
Frequency Response:
Phono :  20 Hz - 20,000 Hz (±0,3 dB)
CD, Tuner, LD/VHD, Tape 1-2 :  1 Hz - 150 kHz (-3 dB)
Tone Control:
Bass :  ±10 dB at 100 Hz
Treble :  ±10 dB at 10 kHz
Subsonic Filter:  -3 dB/oct (15 Hz)
Loudness Control (VR - 30 dB) :  +6 dB at 100 Hz ;  +4 dB at 10 kHz
D/A Section
Output:  2 V
Signal-to-Noise:  105 dB (IHF-A Filter)
Separation:  80 dB (1 kHz, B.P.F.)
Frequency Response:  5 Hz - 20 kHz (±0,5 dB)
Dynamic Range:  91 dB
Video Section
Input/Output:  1 Vp-p/75 Ω
DP, DG:  1°, 1%
Power Requirements: 120/220/240 V AC 50/60 Hz
Power Consumption: 3,2 A
Dimensions (W x H x D):  438 x 137 x 382 mm
Weight:  9,8 kg (net)

Luxman DD-113 cd player

Digital Direct CD Player

Digital Output for Sonic Purity
The DD-113 is the second generation of the world's first digital output-only compact disc player, the D-113D. By concentrating on perfecting the CD player's basic functions prior to the D/A conversion stage, Luxman has achieved the ultimate in pure digital output and solved the needless duplication of DAC functions in the player and amplifier.
Direct Link wuth the LV-113 amplifier
The full potential of the DD-113 can be realized in combination with the Luxman LV-113, an integrated amplifier capable of digital direct input. This set-up completes Luxman's new "Digital Exclusive" system
High-Rigid Lock Mechanism, STAR Circuit
The DD-113 naturally incorporates all the Luxman advances in basic CD player technology, including the High-Rigid Lock Mechanism. Independent springs support the main chassis and the pickup drive mechanism, while a special type of shock-absorbent rubber isolates the pickup base and the main chassis. The STAR Circuit ensures that a constant ground reference is provided independently for each electrical stage and channel.
Convenient Feaatures too - An easy-to-read fluorescent display dimmer can be adjusted to your preference, or switched off completely. Programming of up to 32 tracks in random order is possible through the remote control or front panel controls.
The DD-113 also feaatures:
18-Key Remote Control
Seriall Remote Control with LV-113 Integrated Amplifier

System:  Optical Semiconductor laser Pick-up
Bit: 16-Bit Linear System
Channels:  2 channel Stereo
Digital Output Voltage
Coaxial :  0,5 Vp-p/75 Ω
Optical :  -21 -15 dBm
Wavelength:  660 nm
Frequency Response:  20 -20,000 Hz
Total Harmonic Distortion:  0,001%
Signal-to-Noise Ratio:  85 dB
Dynamic Range:  83 dB
Separation at 1 kHz:  75 dB
Power Requirements:  AC 120/220/240V, 50/60 Hz
Power Consumption: 12 W
Dimensions (W x H x D):  438 x 85 x 331 mm
Weight:  4,4 kg

Harman/Kardon Nocturne 330 receiver

AM/FM Stereo Receiver
Illuminated call outs indicate function that is operating
Tape Monitor Switch for instant comparasion of recorded material and original program
Headphone receptacle permits personal listening
Extended frequency response beyond the normal hearting range gives extra realism to the sounds you can hear. Nocturne sound is cleaner more transparent more sharply defined
D'Arsonval movement tuning meter shows when you have tuned to strongest and clearest signal on AM and FM
Stereo in two rooms, separately or at once. Simple front panel switching elminates the complexity and expense of external switching devices
Separate power On/Off switch permits you to turn receiver on and off without upsetting other controls
Contour for low-volume listening. Contour can be switched in or out, at your discretion.

Power Output:  90 watts ±1 dB;  70 watts IHF at 4 Ω
Frequency Response:  7 - 50 kHz ±1,5 dB at 1 watt
Hum and Noise:  90 dB
Square Wave Rise Time:  3,5 microseconds
Stability:  Absolutely stable with all types of speakers
Usable FM Sensitivity:  better than 2,7 mV, IHF
Total Harmonic Distortion:  0,5%
Spurious Response Rejection:  75 dB
Image Rejection:  better than 45 dB
Antenna FM:  300 Ω balanced
Power Requirements:  AC  105- 125 Volts at 60 Hz
Dimensions (W x H x D):  15-9/16" x  4-7/32" x 11-5/16"

Fisher DD-280 cassette deck

Fisher Direct Drive … the most technically advanced tape drive system
In the new Fisher DD280 cassette deck, Fisher has replaced the conventional belt-drive system with a high-torque 18-pole brushless, coreless, direct drive DC flywheel motor. The motor shaft is the tape transport capstan itself. The result is a silent, one-piece direct drive system that glides at a stable 360 rpm. Wow and Flutter: are reduced to an incredibly low 0,04%. Gone forever are belt wear problems resulting in speed change, belt breakage and replacement. For long term reliability direct drive is the answer.
Feather touch electronic solenoid controls.
Don't look for "clunky" levers on the DD280. transport functions are actuated by sensitive solenoid electronic switching. IC logic circuitry assures instant, positive action. You can go directly from rewind to fast forward to play, without having to manually stop between functions. LED indicators signal mode of operation.
Metal tape compatibility.
The DD280 is also metal tape compatibile. The new metal particle tapes offer a marked improvement in Signal-to-Noise ratio and dynamic range over previous tape formulation. With its metal EQ and bias settings, plus high performance MX/Ferrite heads, the DD280 produces tapes of stunning accuracy. With metal tape, the DD280 delivers an impressive frequency response of 30 Hz - 20 kHz.
Low in profile. And high on features
The low-profile DD280 has everything you'd expect in a professional-quality cassette deck. Calibrated input level controls. Dolby Noise Reduction. Large scale dual-range VU meters. Peak level LED indicators and more.
It's what you'd expect from the new Fisher.
Fisher invented high fidelity from many years, and never stopped moving ahead. The new DD280 is a perfect example. Part of the new Fisher. Where the only thing about us that's old is our dedication to quality and craftsmanship.

H.H. Scott 386 receiver

 Featuring such sophisticated technological advances as electronic circuit protection and electronically regulated power supply, the new Scott 386 AM/FM stereo receiver is a new landmark in the field of audio engineering. High usable power and carefully considered design make the 386 the only choice for the experienced audiophile.
Scott guarantees at least this level of amplifier performance - Massive power transformer and Full Complementary Output circuitry give maximum undistorted power at all audible frequencies.
Instant-acting electronic overload protection - Unlike conventional thermal cutouts, Scott's new protective circuit releases the drive when too much current flows through the output transistors. A circuit-breaker will also trip under prolonged short circuit conditions at high power. There are no fuses to burn out.
Ultra-reliable space-age circuitry - Permanently aligned quartz crystal filter IF, FM amplifier, and four Integrated Circuits (including Perfectune logic module) are included in this small area.
AM reception virtually indistinguishable from FM - New Integrated Circuit AM front end features pre-tuned multi-pole filter for optimum AM fidelity.
Instant-information panel indicator lights - let you know at a glance whether you're receiving AM or FM, stereo or monaural broadcast, Scott Perfectune indicator tells when you're perfectly tuned for best reception.
New connection techniques eliminate solder joint failures - Wire-wrap terminal connections plus plug-in module construction result in the kind of reliability associated with aerospace applications.
Other features:
New illuminated dial results in increased visibility
New muting circuit eliminates noise between FM stations
Plug-in speaker connectors eliminate phasing problems
Silver-plated Field Effect Transistor front end receives more stations more clearly with less distortion
Integrated Circuit IF strip virtually eliminates all outside interference
Integrated Circuit preamplifier reduces distortion to inaudible levels
Full Complementary direct coupled all-silicon output circuitry provides effortless instantaneous power, with maximum reliability
Automatic stereo switching instantly switches itself to stereo operation
Power:  170 watts ±1 dB, IHF power spec. (at 0,8% T.H.D. both channel driven)
Dynamic Power:  67,5 watts/channel (at 4 Ω)
Continuous Power:  42 watts/channel (at 4 Ω);  35 watts/channel (at 8 Ω)
Frequency Response:  20 - 20,000 Hz ±1 dB
Selectivity:  40 dB
Hum and Noise (Phono):  -65 dB
Cross Modulation Rejection:  80 dB
Usable Sensitivity:  1,9 µV
Tuner Stereo Separation:  40 dB
FM IF Limiting Stages:  9
Capture Ratio:  2,5 dB
Signal-to-Noise Ratio:  65 dB
Input Phono Sensitivity:  3,6 mV
Dimensions (W x H x D):  17-1/2" x 5-1/2" x 15-3/4"
Weight:  20 lbs

Genesis 700 speakers

Genesis 700 Loudspeaker features:
The Genesis 700 is based on much of the same technology as found in Genesis Ireference System
Exceptional dynamic range and off-axis response
1,5" thick MDF front baffle and 1" thick MDF sides with heavy internal bracking
Newly-designed, dual 6,5" shielded metal-cone woofers
Twin 1" shielded circular-ribbon tweeters
Unique 4thorder Linkwitz-Riley phase-correct crossover loaded with custom genesis-designed parts
Designed to be equally at home in pure audio or home theater systems
Users adjustable music/video bass contour and tweeter level controls

The 700 incorporates two technologically-advanced and different driver designs to create its sonic magic. The bass and middle frequencies are handled by two shielded, custon-designed 6,5" long-throw metal-cone woofers, and the higher frequencies are reproduced by a shielded version of our famous 1" circular-ribbon tweeter, one in front and one in the rear.
The 700 can be used in either a horizontal position as a center channel,, or in a vertical mounting on either stands or wall mounts as the front, rear or main channels in a music or home theater system.
The crossover is a two-way, 4th order, Linkwitz-Riley phase-correct design that incorporates custom-wound Genesis capacitors, oxygen-free copper inductors and the finest parts available.
The design, quality of materials, and fit of the cabinet are critical to the performance of any loudspeaker. The 700 is unique in both its performance and its construction. Built from heavily-braced 1'-thick MDF for the sides, a 1,5" thick front baffle, and covered in either black ash or South American rosewood, the 700 can truly lay claim to a no-compromise approach.
Beacuse every room and listening situation is different it is not possible to design a loudspeaker that is perfect for every application. Knowing this, Genesis has continued in our tradition of offering you unmatched flexibility. In the rear of the 700, there are two controls, one for the tweeter level and one for music or video. The tweeter level control allows you to adjust the volume of the tweeter to perfectly match your tastes and your system. The music/video switch in the rear of the 700 allows the bass contour to be optimized for either application.

The Genesis 700 has exceptional dynamic range for a speaker of its size. It is capable of easily handling svral hundred watts of power and producing SPL levels approaching that of live music.
With a Frequency Response essentially flat from 48 Hz to 32 kHz, the 700 is a full-range loudspeaker for all but the lowest frequencies which, if necessary, can be augmented with the addition of a Genesis 900 subwoofer.

One of the most critical aspect of a loudspeaker's performance is the ability to maintain a flat energy response off-axis because we typically listen off-axis. The fact that a speaker is flat (in its acoustic energy output) on-axis is an attribute, but it is not as critical as its off-axis response. Very few loudspeakers ever achieve anything close the the level of smooth off-axis performance built into the 700. in fact, the off axis response of the 700 is so good it is often hard to tell where the speakers are in the room.

Type:  2-way
2 x 6,5"  long-throw metal-cone woofers
2 x 1" circular-ribbon tweeter (1 in front and 1 in the rear)
Nominal Impedance:  4 Ω
Frequency Response:  48 Hz to 32 kHz ±3 dB
Dimensions (W x H x D):  10,5" x 21,5" x 13"
Weight:  55 lbs (each no crate)

H.H. Scott 450R receiver

Stereo receiver with DC Power Amp
the 350R features a DC configuration OCL power amplifier for clear, clean sound and low distortion. the four gang FM tuning section and all silicon dual gate MOSFETs assures an extra-wide, low noise signal and superior FM reception. The 350R's dual wide range power level meters calibrated in watts and dBW indicate amplifier output at a glance, the MPX filter cancels unwanted FM noise
Features include: a stereo beacon; FM center chanel and AM/FM signal strength tuning meters; left and right output power meters calibrated 0,001 to 100 watts and -30 dB to +20 dBW for 8 Ω loads; automatic dubbing from one tape to another; and an output hold-off that prevents power supply turn-on transients from being fed to the speakers.
There are inputs for magnetic phono, aux, and two tape. Outputs fro two speaker systems, two tape, and phones.
Controls are provided for tuning, volume, ganged bass, ganged treble, input selection /FM MPX filter, and speaker selection. There are switched for FM muting, high filter, loudness compensation, mono-stereo mode, copy 9dub tape 1 to tape 2), and tape monitor selection.
The fM antenna input is 75 and 300 ohms. A rod antenna and external connection are provided for AM. There are switched and unswitched AC outlets.

Performance FM Tuner Section
Full mute release was attained with 5,5 µV. The monophonic high fidelity sensitivity (60 dB quieting) measured 7 µV. The stereo high fidelity sensitivity (55 dB quieting) was 75 µV. Full mute release was attained with 12 µV. At standard test level the stereo frequency response measured ±3 dB from 70 to 14,000 Hz, rising to +3,5 dB at 15,000 Hz. The monophonic distortion measured 0,65% T.H.D.  The stereo distortion was 0,95% to 0,8% depending on the tuning adjustment (the indicators permit a relatively broad center-channel tuning range). The Signal-to-Noise ratio (mono) measured 69 dB. Stereo separation was 32 dB. Selectivity was good.
AM Tuner Section - background noise was relatively higher than average
Amplifier Section
The power output per channel at the clipping level with both channels driven 20 to 20,000 Hz into 8 ohms measured 88 watts RMS. The Frequency Response at 88 watts, 8 ohms measured +0/-1,5 dB from 20 to 20,000 Hz at a distortion no higher than 0,06% T.H.D. at any frequency.
The tone control range measured +9/-11 dB at 50 Hz ; ±11 dB at 10,000 Hz
The magnetic input hum and nooise measured -62 dB, stereo separation was into the noise level.
The LED output power indicators are instantaneous and track the peak program level. Calibration is approximate. The frequency response is "flat" from 20 to 20,000 Hz in terms of a single LED staying lit across the entire band of test frequencies.
Overall dimensions measure (W x H x D): 17-3/4" x 5-1/4" x 11-13/16"
Weight:  24,5 lbs

Pioneer CT-501 cassette deck

Stereo Cassette Deck
Soft-touch Tape Control - for velvet-smooth operation
Dolby C-type noise reduction system - reduces noise by 19 dB at 5 kHz, extending the usable dynamic range considerably
One-touch recording - just a touch of the Record button is all that is necessary to start recording
Tape selectors - provide positions for all popular tape types; metal, chrome and normal-bias
LED lelev meters - facilitate the making of tapes with minimum noise and distortion
Timer standby - permits off-the-air recording in absentis
Dolby B-type noise reduction

Type:  4-track, 2-channel recording and playback stereo cassette tape deck
Motors :DC servo motors
Heads :
1 x Hard permalloy  rec/pb head
1 x Ferrite erasing head
Fast Winding Time (C-60 tape):  110 sec.
Wow and Flutter (WRMS):  0,06%
Frequency Response
Normal Tape :  35 -13,000 Hz
Chrome Tape :  35 - 14,000 Hz
Metal Tape :  35 - 15,000 Hz
Signal-to-Noise Ratio (Dolby off):  57 dB
Total Harmonic Distortion (0 dB):  1,5%
Input Sensitivity/Impedance:
MIC :  0,3 mV/10 k Ω
Line :  50 mV/ 91 k Ω
Output Level/Impedance:
Line :  316 mV/3,9 k Ω
Power Requirements:  110 V, 120 V, 220 - 240 V AC, 50/60 Hz
Power Consumption: 16 watts
Dimensions (W x H x D):  420 x 120 x 238 mm (16-9/16" x 4-3/4" x 9-3/8"
Weight:  3,9 kg (8 lbs 10 oz)

Pioneer F-101T tuner

Quartz Digital Synthesizer AM/FM  Tuner - a tuner with a built-in programmable time/clock

Programmable Timer:  
A microcomputer controls the timer so that the tuner and connected equipment turn on at preset times. Up to three operations a day - two daily and one-time only
Digital and Analog Clocks:  
A colorful fluorescent panel shows time both in digits and by hands. The digital display doubles as a frequency display for the tuner
Digital Synthesizer Tuner:  
For top tuning accuracy and presents of 8 FM and 8 AM stations
Timer Setting Indicator:  
Present times are shown by lights ringing the analog clock
Sleep Timer:  
Set in 10-minute increments for up to 24 hours
Last Channel Memory:  
FM and AM stations last tuned are automatically tuned the next time the unit is turned on
Memory Backup for Station Frequencies

Usable Sensitivity (mono):  10,8 dBf (0,95 µV, 75 Ω)
50 dB Quieting Sensitivity
Mono :  17,3 dBf (2,0 µV, 75 Ω)
Stereo :  39,2 dBf (25 µV, 75 Ω)
Signal-to-Noise Ratio
Mono :  75 dB
Stereo :  70 dB
Total Harmonic Distortion
1 kHz Stereo :  0,2% ( at 65 dBf)
Frequency Response:  30 - 15,000 Hz +0,5 -2,0 dB
Capture Ratio:  1,0 dB
Alternate Channel Selectivity:  70 dB (400 kHz)
Stereo Separation: 40 dB (1 kHz)
Antenna input:  300 Ω (balanced), 75 Ω (unbalanced)
AM Section
Sensitivity (IHF, Loop Antenna):  250 µV/m
Signal-to-Noise Ratio:   50 dB
Antenna:  loop antenna
Audio Section
Output level/Impedance:
FM (100% mod. Fixed):  650 mV/7 k Ω
AM (30% mod. Fixed):  150 mV/7 k Ω
Power Requirements:  110 V, 120 V, 220  - 240 V, 50/60 Hz
Power Consumption: 15 watts
Dimensions (W x H x D):  420 x 60 x 317 mm (16-9/16" x 2-3/8" x 12-1/2")
Weight:  3,6 kg (7 lb 15 oz)

Sansui R-70 receiver

Sansui R-70 is an AM/FM stereo receiver FTC rated 8ohms at 65 watts RMS per channel, 20 to 20,000 Hz, at a distortion no higher than 0,08% T.H.D. at any frequency
Features include a stereo beacon, three-step LED FM center channel tuning indicator, five-step LED AM/FM signal strength tuning indicator, leeft and right twelve-step LED output power indicators calibrated 0; 0,005; 0,01; 0,02; 0,05; 0,1; 0,5; 1; 2; 10; 50 and 80 watts into 8 ohms, and automatic copy (dub) from/to either of two recorders.
There are inputs for magnetic phono, Aux, and two tape. Outputs for two speaker systems, two tape, and phones.
Controls are provided for tuning, concentric-clutched left and right volume (labeled volume/balance), ganged bass, ganged treble, tape monitor/ copy selection, input selection and speaker  selection. There are switches for high filter, loudness compensation, and FM muting (auto for stereo, off for mono).
The FM antenna input is 75/300 ohms. An internal antenna and external connection are provided for AM. Switched and unswitched AC outlets are provided.
FM Tuner Section
Full limiting measured 6 µV. The monophonic high fidelity sensitivity (60 dB quieting) measured 13 µV. The stereo 55 dB quieting high fidelity sensitivity could not be measured because unusually high pilot and MPX subcarrier leakage blocked the test equipment at -38 dB. Full mute release was attained with 3 µV.
The stereo pilot and subcarrier leakthrough is high and requires the use of an MPX filter when recording with Dolby. This is no problem since all Dolby noise rduction systems have the MPX filter; if yours is switchable make certain it is switched in.
At standard test level the stereo frequency response measured +0,5/-0,4 dB from 20 to 15,000 Hz. Monophonic distortion measured 0,18% T.H.D.; stereo distortion was 0,35% T.H.D.. The Signal-to-Noise ratio measured 75 dB . Stereo separation was +40 dB. And selectivity was is good.
AM Tuner performance - background noise level was higher than average.
Amplifier Section performance
The power output per channel at the clipping level with both channels driven 20 to 20,000 Hz into 8 ohms measured 43 watts RMS. The Frequency Response at 43 watts into 8 ohms measured +0/-0,6 dB from 20 to 20,000 Hz  at a distortion no higher than 0,065% T.H.D. at any frequency.
The tone control range measured +11/-12 dB at 50 Hz ; ±10 dB at 10,000 Hz
The magnetic input hum and noise measured -58 dB; stereo separation was into the noise level.
The output power meters are broadly calibrated - 1; 10; 100 watts, etc - and are reasonably accurate at the calibration marks. The Frequency Response of the meters is essentially "flat" 20 to 20,000 Hz, and can be relied on for tests if the reference is one of the fast rise and a slow decay, providing a form of semipeak indication.

Overall dimensions are:  16-15/16" (wide) 5-13/16" (high) 9-1-16" (deep)
Weight is 16,5 lbs

Technics ST-G460 tuner

Quartz Synthesizer Stereo Tuner
3 band 39-channel random access preset memory
Class AA output amp circuitry for signal transfer accuracy
Traditional Technics DC construction enhances waveform fidelity while extending flat frequency response all the way down to 4 Hz
Technics quartz synthesizer digital tuning usas an unwavering quartz crystal reference to prevent drift while promoting astounding accuracy and convenience
DC Linear Switching MPX reduces distortion and expands dynamic range
Large FL display
FM signal strength indicator
Auto-scan tuning and auto memory

FM Sensitivity (S/N30 dB, 75 Ω) :  1,3 µV
Total Harmonic Distortion
Mono :  0,05%
Stereo :  0,1%
FM Signal-to-Noise Ratio
Mono :  72 dB ( 80 dB IHF)
Stereo :  65 dB (73 dB IHF)
FM Frequency Response:  4 Hz - 15 kHz +0,5 dB -1,0 dB
Alternate Channel Selectivity (±400 Hz):  65 dB
FM Stereo Separation (1 kHz):  50 dB
AM Sensitivity (S/N20 dB):  20 µV (MW); 50 µV (LW)
Output Voltage:  0,3 V
Power Requirements: 240 V 50/60 Hz
Power Consumption:  9 W
Dimensions (W x H x D):  430 x 69 x 288 mm
Weight:  2,5 kg

Technics SU-V460 amplifier

Stereo Integrated Amplifier
Class AA amp circuit for extra clean power, 2 x 45 W RMS 920 Hz - 20 kHz, 8 Ω). The Technics developed circuit Class AA stabilizes speaker drive while delivering high power with low distortion of 0,0009% 91 kHz, 8 Ω)
New ultra-pure "Power Amp Direct" input by passes the preamp section to provide Signal-to-Noise ratio improvement and maintain signal's purity
High Speed EX capacitors with high-purity electrolyte for transparent mid/high range quality
Heavy duty power supply
6-position multiple input facilities
"A" and/or "B" speaker selecction
Tone defeat switch, loudness switch, low-noise NFB type tone controls
6-position Rec selector
Black (K) or Silver (S) finish

Continuous Power Output per Channel
From 20 Hz - 20 kHz (8 Ω, T.H.D. 0,005%) :  45 W
Into 1 kHz DIN (8 Ω, T.H.D. 0,0009%) :  60 W
Into 1 kHz DIN (4 Ω, T.H.D. 0,002%) :  85 W
Input Sensitivity
Phono :  2,5 mV/47 k Ω
Tuner, CD, Aux, Tape :  150 mV/22 k Ω
Direct In  IV :  18 k Ω
Frequency Response:
Phono :  RIAA ±0,8 dB
Tuner, CD, Aux, Tape :  20 Hz - 20,000 Hz (-0,2 dB); 3 Hz - 100,000 Hz (-3 dB)
Signal-to-Noise Ratio:
Phono :  76 dB ( 81 dB IHF A)
Tuner, CD, Aux, Tape :  97 dB
Direct :  106 dB
Power Requirements:  240 V 50/60 Hz
Power Consumption:  450 W
Dimensions (W x H x D):  430 x 125 x 320 mm
Weight:  8,0 kg