Celestion Ditton 15XR

 The completely new Ditton 15XR is a sophisticated bookshelf loudspeaker system using all new components but drawing on the valuable experience gained with the world renowed Ditton 15. the design of "compact" or bookshelf loudspeakers demands the solution of special problems if proper bass reproduction is to be obtained. With the introduction of the highly successful Ditton 15, Celestion perfected a principle now universally known as the ABR. This device has a rigid diaphragm with linear roll neoprene suspension. Its motional mass is precisely calculated and acoustically coupled within the hermetically sealed enclosure. When signals are applied to the main bass drive unit the tuning is such that the ABR is in phase through a frequency band in the region of 60 Hz down to 30 Hz. Bass frequencies are thus shared between the main and auxiliaty diaphragms.

 That the ABR confers substantial benefits perticularly where the enclosure dimensions have been limited, as in the Ditton 15XR, has been endorsed repeatedly by the technical Press. In addition to extending bass response downwards, giving a more realistic musical balance, and intrinsic function of the ABR is to reduce the required excursion of the main bass unit, thereby further reducing harmonic and doppler distortion. Both power handling and efficiency are also improved, resulting in increased dynamic range and therefore greater musical realism.

1. The latest type HD 1000 tweeter designed and produced by Celestion to the highest standards, the frequency range of this unit is from 2,5 kHz to 28 kHz. The domed diaphragm ensures good dispersion and low distortion.

2. Anechoic cellular foam wedge and lining absorbs unwanted acoustic energy within the enclosure and prevents the formation of standing waves which would be detrimental to the loudspeaker performance.

3. New NS8 (8") bass midrange drive unit with specially plasticized fibre cone to prevent resonsnces whilst the neoprene roll front suspension and concentric rear suspension permits the 1-inch long coil the large movements essential for the correct reproduction of low bass notes, with minimal distortion. A powerful 51,000 Maxwells (11,000 Gauss) magnet system weighing 1,1 kg controls these excursions, and all the components are housed in a new pressed steel plated chassis.

4. Units mounted flush to eliminate diffraction effects and tunnel resonances; covered by acoustically transparent grille cloth for maximum presence.

5. ABR (Auxiliary Bass Radiator) New 8" unit with front neoprene roll suspension and pressed steel plated chassis, developed to work in concert with the bass/midrange unit. 

Specifications

Power Ratings:

Maximum Rated Power:  60 watts programme (without clipping)

Continuous Sine Wave Voltage Rating

9,7 volts RMS max. 30 Hz - 2,6 kHz

7,0 volts RMS max. 2,6 kHz - 20 kHz

Sensitivity:  5,1 watts pink noise input produces 90 dB SPL at one metre in anechoic conditions

Amplifier Requirements:  10 - 60 watts RMS

Frequency response:

Overall :  30 Hz - 2 kHz

Specific:  60 Hz - 20 kHz ±4 dB;  45 Hz - 26 kHz +4 dB  -10 dB

Impedance:  8 Ω

Harmonic Distortion (at 90 dB SPL):

1,2% at 100 Hz

0,69% at 400 Hz

0,86% at 1 kHz

0,46% at 4 kHz

1,13% at 10 kHz

0,91% at 15 kHz

Crossover Frequencies:  2,4 kHz

System Resonance:  35 kHz

Internal Volume:  23 liters

Dimensions (H x W x D):  560 x 250 x 240 mm (22" x 9-3/2" x 9-1/2")

Finishes:  Teak or Walnt

Celestion CX 2012

 Celestion 12" Co-axial Loudspeaker

Handling 20 watts RMS and covering a frequency range of 30 Hz to 18 kHz, this loudspeaker has a moulded foam surround and a horn-loaded treble unit. This treble unit gives wide dispersion of the high frequencies and has a "brilliance" control so that the level can be adjusted to suit room conditions

Features:

1.Hi-Flex "free" surround - provides high compliance, eliminates standing waves and surround resonance. Guaranteed moisture resistant. 

2.Two Voice Coils - extra long bass voice coil and precision mounted H.F. coil ensure clean extended frequency coverage. 

3.Compression horn loaded treble unit - for linear and wide angle distribution of high frequencies.

4.High flux ceramic magnets - ensuring high input/output ratio

5.Pure electrical cross-over - provides smooth frequency transition and feed to the appropriate voice coil

6.Rigid die-cast chassis - giving permanent precision alignment

7.High Frequency level - or "brilliance" control allows adjustment of high frquency level to suit room conditions. Complete with 30" of cable, escutcheon and control knob

Specifications:

Overall Frequency Response:  30 Hz - 18 kHz

Power Handling Capacity:  20 watts RMS 40 watts peak

Fundamental Resonance Frequency:  35 Hz

Crossover Frequency:  4 kHz

Impedance:  15/16 Ω

Ceramic Magnet: 

Flux Density :  17,000 Gauss

Total Flux :  180,000 Maxwells

Voice Coil:

Bass :  44 mm (1 ¾") diam.

Treble :  25 mm (1") diam. Aluminium Wire

Chassis (Die-cast Alloy):

Overal Diameter :  317 mm (12 ½")

Overal Depth :  139 mm (5 ½")

Baffle Hole:  279 mm (11")

Net Weight:  7,5 kg (16 lb 110 oz)

Weight (including packing):  8,6 kg (19 lb)

Celestion Ditton 110

 Celestion Ditton 110

Two-way Acoustic Suspension Loudspeaker

Standards of performance rare in a loudspeaker in this price range. A newly designed 8" cone woofer is aligned vertically with the HF 1001 1" dome tweeter for precise stereo imaging. The flush-fronted cabinet design and the woofer's PVC surround contribute to smooth dispersion, while Celestion's unique laser-computer technology has resulted in the ability to reproduce high peak power levels cleanly.

  The HF 1001 tweeter, developed and perfected with Celestion's unique laser-computer scanning system

Specifications

Drivers: 

Tweeter :  1" dome tweeter, HF 1001

Woofer :  8" PVC surround woofer

Frequency Response:  72 Hz - 20 kHz

Crossover Frequency:  2,3 kHz

Impedance:  8 Ω

Amplifier Requirements:  10 to 50 wats per channel

Sensitivity:  87 dB spl; one watt in at one meter

Dimensions (H x W x D):  425 x 240 x 212 mm (16¾" x 9½" x 8¾")

Weight:  5,5 kg (12 lbs)

Finish:  Walnut vinyl with acoustically transparent black grille cloth

Recommended Placement:  On shelf, stand or wall-mounted

Celestion Ditton 100

 Celestion Ditton 100

Compact Two-way Acoustic Suspension Loudspeaker

Celestion  Dittons are updates of very successful originals, and all are beneficiaries of their creators' now well-known harnessing of laser-based measurement techniques. Although a family of identical outward appearance (simulated walnut veneer and dark-brown grille cloth on a shaped frame), and all are closed-box two-unit designs, there are significant differences apart from the obvious one of physical size.

 Celestion performance at its most economical and compact. The HF 1001 tweeter, developed and perfected with Celestion's unique laser-computer scanning system, combines with 6 ½" low-mass PVC-surround woofer for minimal distortion and increased efficiency. The drivers are vertically aligned and flush-mounted for accuratte stereo imaging. The 100 is well-suited to receivers and amplifiers of 10 to 40 watts per channel.

Specifications

Drivers: 

Tweeter :  1" dome tweeter, HF 1001

Woofer :  6½" PVC surround woofer

Frequency Response:  78 Hz - 20 kHz

Crossover Frequency:  2,3 kHz

Impedance:  8 Ω

Amplifier Requirements:  10 to 40 wats per channel

Sensitivity:  87 dB spl; one watt in at one meter

Dimensions (H x W x D):  330 x 210 x 197 mm (13" x 8¼" x 7¾")

Weight:  4,41 kg (9,75 lbs)

Finish:  Walnut vinyl with acoustically transparent black grille cloth

Recommended Placement:  On shelf, stand or wall-mounted

Celestion Ditton 121

 The Celestion Ditton 121 is bookshelf 2-way speaker systems from the 80's a 

large clean soundfrom a small cabinet.

1.Baffle edges contoured for excellent acoustic properties

2.Glass filled nylon clamp ring

3.Integral HF unit rear loading cnclosure

4.Barium ferrite magnet 1.0. Tesla

5.Pressure formed aluminium dome

6.Critically located damping elements

7.Baffle injection moulded from foamed styrene for strength and rigidity

8.Neoprene roll surround

9.Resistent protective grille formed from perforated rigid polystyrene sheet

10.Four layer voice coil

11.Barium ferrite magnet 0.7 tsla

12.Integral crossover and terminal housing module. Terminal posts connected directly to crossover board

13.Bonded acrylic fibre damping

14.High density particle board cabinet assembled with baffle integral

Specifications

Overall Frequency response:  60 Hz to 18 kHz (±6 dB)

Impedance: 8 Ω nominal

System Resonance: 75 Hz

System Q:  1.2

Sensitivity:  2.5 watts pink noise input produces 90 dB SPL at 1 metre in anechoic conditions

Crossover Frequency:  4 kHz

Power Handling: 

Max. Rated power 40 watts programme (without clipping)

Continuous Sine Wave voltage rating 9.0 V 20 Hz - 4 kHz ; 4,5 V 4 kHz - 20 kHz

Amplifier Requirements:  10 -40 watts

Finish:  Teak, Walnut, Black

Internal Volume:  18 litres

Dimensions (W x H x D):  265 x 395 x 226 mm

Weight:  6 kg each net

Celestion Ditton 120

 The name Celestion has been synonymous with loudspeakers since 1924 ans is today held in high esteem throughout the world by sound engineers and music lovers alike.

The high fidelity loudspeakers detailed  in this article the latest in the famous "Ditton" range and is the  result of extensive research and development carried out in the Celestion laboatories.

Celestion quality is evident throughout the new Ditton 120 and the unrivalled and exclusive Celestion features which have made Celestion "Dittons" world famous are incorporaed into this new system.

 The upper register from 3 kHz to 15 kHz is reproduced faithfully by the renowned HF 1300 treble unit, many thousands of which have been supplied to manufactures for inclusion in monitoring systems. This "pressure" type unit is 1½" (38 mm) diameter and has an exceptionally smooth response due to careful attention to phase correction and acoustic damping.  The very low mass of the diaphragm assembly and the high magnetic flux permit transient response ofa high order. The small area of the diaphragm provides an excellent polar radiation pattern and ensures a highly satisfactory stereophonic image.

The middle-bass register is reproduced by a sophisticated unit of very high quality. The diameter is 5" (120 mm) and a linear diaphragm excursion of up to ½" is possible ensuring correct reproduction of bass notes at all volume levels. The diaphragm assembly is controlled by a massive magnet system having a flux of 50,000 Maxwells which ensures high efficiency and optimum damping.

 The third radiator is a new version of the exclusive Celestion auxiliary bass radiator now known universally as the ABR. This device ensures improved reproduction of low bass notes even with comparatively small enclosure dimensions. The ABR is operative at the lowest part of the register from 35 Hz to 70 Hz and since the work is shared between the two bass diaphragms efficiency is increased and distortion reduced to a vry low order; in short, the ABR ensures true bass.

The electrical system is integrated by an inductance-capacity frequency dividing network which has been meticulously designed to provide a level response.

 The Celestion Ditton 120 reproduces the full audible range and is suitable for connection to virtually all high quality amplifiers. Where cost and size figure the Ditton 120 provides outstanding value and performance. The appearance will please the most fastidious and the smooth and effortless sound quality will delight the musican and connoisseur alike.

 The appearance and finish of the 120 enclosure is excellent. By using a single sheet of veneer to completely enclose the four sides of the cabinet there is a joint running of the cabinet there is a joint running along one edge only; conseguently it will look equally good in whatever position it is placed. The rear is neatly finished with connections provided by means of two colour-coded screw terminals.

 Drive Units and cabinet

1. Treble Unit Type HF 1300, Phase Corrected, Acoustically Damped, Studio Standard ± 2 dB

2. Mid-Bass Unit, Ultra Compliant Suspension, High Flux (50,000 Maxwell) Magnet

3. Auxiliary Bass radiator (known as ABR) maintains output over 35 Hz - 70 Hz band

4. Anechoic wedges eliminate standing waves (concealed), low loss crossover network

Specifications

Response:  35 Hz to 15 kHz

Max Input:  20 watts (DIN 45 500)

Crossover:  Low loss L/C network at 3,000 Hz

Impedance:  4 - 8 Ω

Treble Unit:  38 mm (1½") Pressure Type

Mid-Bass Unit:  120 mm (5") Long throw

Auxiliary Bass:  120 mm (5") 15 Hz Resonance

Finish:  natural teak or walnut

Dimensions:  17¼"  x  9" x  7¾"

Celestion Ditton 66

 A new loudspeakers of advanced design suitable for stuio use and for home installations of the highest quality.

Even the cabinet's distinctive visual design contributes to your listening enjoyment. Its tall, slender silhouette permits maximum enclosure volume in minimum floor space (only 1.2 square feet), while aligning the upper frequency drivers more directly with the usual listening level.

 Driver units

HF 2000 - dome "pressure" type

MF 500 -  Mid-range dome "pressure" type

Within the cabinet are a superbly matched set of drivers and the Auxiliary Bass Radiator, all aligned on a single vertical axis to minimize diffraction effects. High frequencies are handled by the HF2000 tweeter (specified by the B.B.C. for monitor use).

The mid-range driver is the pressure-dome MD500. And for the bass, a combination of the FC12 bass unit and 12 inch A.B.R. (Auxiliary Bass Radiator) together with the carefully damped enclosure form an acoustic circuit that operates smoothly to frequencies well below 40 Hz.

The crossover has resulted from considerable research and crossover points are at 500 Hz and 5000 Hz, 80 watts maximum. 4 - 8 ohm. This monitor loudspeaker system has an exeptionally wide and flat, frequency respponse. Very low order harmonic and intermodulation distortion. Precise response to transients. Beautifully maintained polar response ensures absenc of unwanted directionall effects and provides a highly satisfactory stereo image throughout the listtening area.

Specifications

Frequency Response:  18 Hz to 40 kHz

Pink Noise Sensitivity:  4.8 Watts

Recommended Amplifier Capacity:  10 Watts to 160 Watts

Driver Complement: 

1 x HF2000 Dome Tweeter (1")

2x MD500 Dome Mid-range (2")

1 x FC12 Bass (12")

1 x A.B.R (12")

Crossover Frequencies:  500 Hz ; 5 kHz

Cabinet Dimensions:  1000 x 380 x 290 mm (40" x 15" x 11½")

Nett Weight:  26.8 kg (59.0 lbs)

Shipping Weight:  32.0 kg (70.5 lbs) per pair