Luxman PX-101 turntable

 Luxman PX-101

Fully Automatic Tangential Tracking Turntable

The PX-101 plays back records exactly as they were cut; in a straight line. Essentially providing zero-deviation from the cutting process, as well as zero tracking error and zero tracking distortion during playback.

The advantages of tangential tracking are immediately evident. The music sounds “cleaner”, with better separation between channels, better separation of instruments within the orchestra, and a far more vivid recreation of the “soundstage”.

With the PX-101, wow and flutter is inaudible. Rumble, non-existent. Speed of 33-1/3 and 45 RPM, with a ±3% deviation available at will. Both the tonearm and headshell are constructed of improved aluminum alloy for resonance-control and damping. Fully automatic, direct-drive, it requires but a touch to operate. A built-in circuit of the PX-101 will automatically place your accompanying Luxman KX-101 or KX-102 cassette deck in the pause mode when the record you’re recording has reached the end of play. And the PX-101 is also responsive to the Infrared Wireles Remote Control system of the new Luxman RX-103 Receiver.

Features:

Tangential Tracking System – The straight tone arm of the PX-101 tracks in a straight line from the outer grooves to the inner grooves of a disc, exactly as the disc was cut. This virtually eliminates tracking errors and inside force problems; giving better stereo separation, and a more vivid recreation of the recording “soundstage”. The high performance tonearm is driven by a separate tonearm control motor, which is superior in its construction of computerized control circuits and improved stainless steel wire.

Optical Sensing Fully Automatic Function – Fully automatic, smooth, accurate response is ensured thanks to the exclusive integrated Circuit TIP and Optical Sensing Circuit. (Detection of the auto return point occurs without side-force.) Press the Start/Cut button after selecting the speed. Automatic lead in and lead out of the tonearm is activated by Feather-Touch Control. Interruption of operation during play is made easy by pressing the Start/Cut button. The tonearm automatically returns to the armrest and shuts off the motor. In the “Repeat” position, playback of the same record is endlessly repeated.

Auto Disc Pause – When activated, a built-in circuit of the PX-101 automatically places your accompanying KX-101 or KX-102 cassette deck  in the pause mode from the record mode, when the record being taped reaches the end of play. Allows you to leave the system unattended while taping.

Remote Control Capability – In combination with the RX-103 Receiver, the PX-101 Turntable may be controlled through the RX-103’s infrared wireless Remote Control. The Remote Control activates the turnable’s play, cut, cue up, and cue down functions.

Electrical Cueing and Arm Speed Switches – A touch of the Cueing Switch controls the tonearm, up and down. The Arm Speed Switch allows you to move the tonearm into position over the exact cur desired on the disc. A slight touch and the arm moves slowly; a further touch and the arm moves faster, either toward the inside or outside of the disc.

External Control Board – The controls are located outside of the dust cover, to protect discs while in play.

Detachable Head Shell – Cartridges are easy to install. The PX-101 accepts a variety of cartridges and other standard universal head shells.

Mirror Reflex Stroboscope – The unique Stroboscope system of mirror-reflection makes adjustments on accurate feed rotation easy.

Pitch Control – The speed can be adjusted by tuning pitch control up to ±3%

Specifications

Drive System:  Direct drive system

Speeds:  33-1/3 and 45 rpm

Pitch Control: ±3%

Speed Indication:  Stroboscope

Platter:  Aluminum diecast

Platter Diameter:  300 mm (12 “)

s/n (DIN-B):  70 dB 

Wow and Flutter (WRMS):  0,045%

Tonearm:  Improved Aluminum

Effective Length:  165 mm

Tracking:  Tangential

Cartridge Weight:  4 – 8 g

Stylus Pressure:  0 – 3 g

Headshell:  Detachable, improved aluminum

Arm Lifter:  Touch switch control

Auto Function:  Fully automatic, Start/Cut, Auto Repeat Switch

Dimensions (W x H x D):  440 x 115 x 405 mm (17,6” x 4,6” x 16,2”)

Weight (Net):  7,4 kg (16,3 lbs)

Aiwa AP-2300 turntable

Semi- Automatic Direct Drive turntable

Features:

High-efficiency D-D Linear Torque Motor - wow and flutter below 0,035% (WRMS)

Super-solid resin cabinet with revolutionary "Space Saving" design

Fully-adjustable insulator feet

High-sensitivity J-shaped tonearm

Viscous-damped cueing

Full Front Operation

Variable pitch control ±3%

The pitch control knob provided lets you adjust the player's rotation precisely to the standard 33-⅓ or 45 rpm speeds, but there's another big advantage; pitch can be changed by as much as plus or minus 3 percent. Use this control when accompanying the record on your guitar or other instrument, or to vary musical pitch according to listening preference.

 

Easy-to-read stroboscope design

To add to the AP-2300's clean, simple appearance, the stroboscopic markings along the platter have been reduced from the usual 4 rows to 2. when employing the pitch control to adjust rotation speed, the knob should be moved until the upper or lower row of markings appears to be standing still. This indicates precise setting to the 33-⅓ and 45 rpm rotation speed , respectively.

 

Exclusive "Rec-Sync" disc-to-cassette automatic recording mechanism

The Ap-2300 was designed for use with other Aiwa component, but goes a step beyond mere matching for appearance sake; by connecting the cord provided with the unit from the special "rec-sync" jack at the rear panel of the AP-2300 to most Aiwa cassette deck models, player-to-cassette recording can be commenced automatically in tandem with the lowering of the played tonearm of the disc. Synchronized recording operation - it's another reason why Aiwa -built components work superbly together as well as separately.

 

Specifications

Drive System:  Direct-drive system

Motor:  2-phase, 8-pole Slotless Hall effect motor

Turntable Platter:  aluminum alloy diecast

Diameter:  306 mm

Weight:  1,0 kg

Speeds:  33-⅓ and 45 rpm

Variable Pitch Control:  ±3%

Wow and Flutter:  0,035% WRMS / 0,065% DIN

Signal-to-Noise Ratio :  60 dB (IEC-B curve); 70 dB (DIN-B curve)

Tonearm

Type:  Static Balanced type

Effective Arm length:  215 mm

Overhang:  15 mm

Offset Angle:  21,5 °

Tracking Error:  +5,8°, +0,3°

Suitable Cartridge Weight:  3 - 12 g

Applicable Tracking Force:  0 - 3 g (direct readout of tracking force)

Cartridge Headshell Weight:  23 g (including headshell)

Cartridge Type:  Moving Magnet  (MM)

Output Power:  3 mV (1 kHz, 5cm/sec.)

Needle:  0,5 mil diamond

Stylus Pressure:  2 g

Frequency Response:  20 - 20,000 Hz

Semiconductors:  2 ICs; 9 Transistors; 9 Diodes,

Power Supply:  AC 110-120 V, 220-240 V 50/60 Hz

Power Consumption:  6 watts

Dimensions (W x H x D):  424 x 123 x 359 mm (16-3/4" x 4-7/8" x 14-3/16")

Weight:  7 kg (15,4 lbs)

 

Aiwa AP-2200 turntable

Semi- Automatic Direct Drive turntable

Features:

High-efficiency D-D Linear Torque Motor - wow and flutter below 0,036% (WRMS)

Super-solid resin cabinet with revolutionary "Space Saving" design

High-sensitivity S-shaped tonearm with nowly designed stylus pressure gauge.

Full Front Operation

Simplified stroboscope and speed adjust controls

Exclusive "Rec-Sync" disc-to-cassette automatic recording mechanism

Free-stop dust  cover, viscous-damped cuing, anti-skating, auto-return and other…

 

Specifications

Drive System:  Direct-drive system

Motor:  2-phase, 8-pole linear torque DC servo motor

Turntable Platter:  aluminum alloy diecast

Diameter:  306 mm

Weight:  1,0 kg

Speeds:  33-⅓ and 45 rpm

Variable Pitch Control:  ±3%

Wow and Flutter:  0,035% WRMS

Signal-to-Noise Ratio :  60 dB (IEC-B curve)

Tonearm

Type:  Static Balanced type

Effective Arm length:  215 mm

Overhang:  15 mm

Offset Angle:  21,5 °

Usable Cartridge Weight:  3,5 - 11 g

Stylus Pressure Range:  0 - 3 g

Semiconductors:  2 ICs; 9 Transistors; 10 Diodes, 2 Hall devices

Power Supply:  AC 120 V, 220-240 V 50/60 Hz

Power Consumption:  5 watts

Dimensions (W x H x D):  424 x 123 x 359 mm (16-3/4" x 4-7/8" x 14-3/16")

Weight:  6,9 kg (15,2 lbs)

 

Dual 728Q turntable

Quartz PLL direct drive, fully automatic operation, and Dual's s exclusive Ultra Low Mass tonearm system

Dual exclusive features

ULM tonearm and cartridge system: less than 8 grams total effective mass

New XM300 alloy increases rigidity, reduces resonance

Hydrodynamic suspension system for tonearm, motor and platter

Turntable acoustic isolators minimize acoustic feedback and external shock

Tunable anti-resonance filter with viscous damping

HDC (High Damping Compound) housing provides high internal damping and suppresses external interference

Unique dust-cover hinges allow placement close to rear wall

 

The moment the ULM tonearms touches down on your record, you will appreciate what Dual engineers have accomplished. You will hear a purity of tone that has never before emerged from the grooves. Even if the record is warped.

 

The Ultra Low Mass. tonearm

The Dual straight-line tubular tonearm is suspended in a four-point gyroscopic gimbal which centers and balances the tonearm mass where it pivots. The vernier-adjustable counterbalance establishes zero balance with micrometer-like precision. A tempered flat-wound spring applies tracking force at the pivot - without increasing effective mass. The tonearm remains in perfect dynamic balance throughout play, even if the turntable is not level.

The ULM tonearm can accommodate cartridges weighing as little as two grams. ULM cartridges made to Dual specifications weight only 3,5 grams, including mounting bracket and hardware.

 

ULM is Dual's exclusive Ultra Low Mass tonearm and cartridge system with total effe3ctive mass less than 8 grams. That's less than half the mass of conventional tonearm and cartridge combinations.

This major breakthrough by Dual has been acclaimed throughout the audio industry, especially by the independent test labs.

These labs have begun to use warped records as 'real-life' test instruments

One lab, after making the usual measurements, also listened to a record played by the sme ULM tonearm and cartridge system. There is no way measurements, or mere words, can describe the acoustic presence, highs re crystalline, with a purity we haven't heard before. The bass is so clean that one can hear new sounds from records, such as the harmonic vibration of unplayed strings on the double bass, overall definition and transient response were outstanding.

 

Hydrodynamic suspension system

Radically new design floats the tonearm , motor and platter as one unit on four cylinders, each filled with special viscous fluid. This system absorbs virtually all spurious energy originating in sound waves as well as vibrations caused by footfalls or other movements in the room.

Two suspension systems

There are two separate and independent suspension systems, each highly effective in isolating the tonearm from acoustic feedback and other music-muddying interferences. The Hydrodynamics system floats the tonearm, motor and platter as one unit on four accordion-like shock absorbers, each filled with a special viscous fluid.

The second suspension system incorporates four tunable acoustic isolators where other turntables simply have feet. Each of these isolators is adjustable to provide maximum protection from either acoustic feedback or external shock. No more tip-toeing across the room to keep the tonearm from jumping. And no more cutting the bass to eliminate feedback.

 

Tunable anti-resonance filter

Like all other systems with mass and compliance, tonearms and cartridges tend to vibrate and cause undesirable resonances. These resonances cannot be entirely eliminated, but unless minimized they cause power-draining subsonic woofer-cone movements. You hear the results as muddy bass. Dual engineers have solved this problem with the unique tunable anti-resonance filter.

Housed in the counter-balance, the anti-resonance filter can be precisely tuned to match the tonearm to the mass and compliance of all available cartridges. The tonearm is made of the special new XM300 aluminum/magnesium alloy which increases rigidity and reduces resonance.

 

Ultra Low Mass

Hydrodynamic suspension, tunable acoustic isolators, tunable anti-resonance filter - all important contributions leading to perfection in record playback. And all Dual exclusives. Equally important, the materials, the quality control exemplify all that has made Dual precision and reliability so highly regarded throughout the world.

 

Specifications

Tonearm

Effective Length:  8-3/4"

Bearing Friction:  0,007 grams

Total Effective Mass (with ULM cartridge):  less than8 grams

Cartridge Weight Range:  2 - 9 grams

Minimum Tracking Force:  0,25 grams

Anti-skating System :  Callibred for all styli

Tunable Anti-resonance Filter: yes

Four-Point Gimbal:  yes

Motor and Platter

Motor Type:  Quartz PLL

Drive System:  Direct

Platter Size:  12"

Illuminated Strobe:  yes

Operations

Automatic Start and Stop:  yes

Manual Start and Stop:  yes

Damped Cue-control:  yes

Pitch-control Range:  11%

Rumble:  better than78 dB

Wow and Flutter: ±0,0225%

Dimensions:  17-1/2" x 15-3/16" x 5-1/12"

Luxman PD-272 turntable

Direct-Drive Turntable

A new direct-drive turntable from Luxman at a modest price. A brushless and slotless DC servo motor and a straight, low-mass tonearm offer superb Wow and Flutter no more than 0,03% and excellent Signal-to-Noise Ratio at 60 dB

Brushless and Slotless DC Servo Motor

Excellent woa and flutter characteristic together with stable rotation are assured by adopting a Brushless and Slotless DC Servo Motor in which slots are completely removed to eliminate unevenness of rotation caused by electro-magnetics, and further a turntable platter of high inertia makes it possible to distribute the large mass of platter weight around the outer contour.

Straight0Type Tonearm

A straight type tonearm is adopted to eliminate resonance caused by lack of intensity which tends to be found on the tonearm exclusively designed for high compliance type cartridge, and at the same time the root of the tonearm is of double-pipe structure to strengthen anti-resonance affect.

Further, the cartridge shell is integrated to the tonearm, thus resonance is suppressed down to the minimum. Also such problem as poor contact of cartridge terminals is removed.

 

Acrylic Dust Cover

For the dust cover, an acrylic resin is adopted which provides a very smooth surface and excellent characteristic against acoustic, feedback. The entire cover is detachable with semi-free-stop hinges.

Ultra Thin Type OI Core Transformer

An ultra thin type OI core transformer of the least-leakage flux, it adopted which is smoothly housed in the smart chassis. This contributes to the realization of stable rotation and excellent signal-to-noise ratio.

Platter Mat

The platter mat is so designed as to realize firm retention of the disc. To minimize unnecessary space between disc and platter mat, the plane is procured between the two by making the contour of platter mat suitable to that of disc.

Of course the platter mat not only damps discs but the platter itself thanks to high density rubber material, and further it is exactly inlaid to the turntable platter. The surface with special treatment ensures superb contact to discs.

 

Functions

A unique switch controls both power turn-on and turn-off and speed selection through the use of a single switch. A stroboscope of mirror reflex type, oil damped cueing system, anti-skating device etc, are all ideally arranged based upon human engineering considerations.

 

Specifications

Phono Motor Section

Driving System:  Direct-drive system

Motor:  DC servo brushless and slotless motor

Turntable Platter:  300 mm aluminium die-cast

Platter Weight:  1,8 kg including mat

Rotation:  33-⅓ and 45 rpm

Adjustable Range of Rotation:  ±4%

Signal-to-Noise Ratio:  no less than 60 dB (IEC-B)

Wow and Flutter:  no better than 0,03% WRMS

Tonearm Section

Tonearm:  Straight arm of static balance type

Effective Length:  240 mm

Tracking Error:  +2° 13'; -1° 08'

Overhang:  15 mm

Cartridge Weight:  4 g - 11 g

Cartridge Height:  13,5 mm - 20,5 mm

Stylus Pressure:  0 - 3 g (direct reading)

Accessories:  Anti-skate Adjustment, Tonearm Elevation

Additional Features

Dust Cover:  Detachable with semi-freestop hinge

Insulator:  Height adjustable

Stroboscope:  Mirror-reflex type

General

Power Consumption:  5 W

Dimensions (W x H x D):  472 x 152 x 348 mm (18-37/64" x 6" x 13-45/64")

Weight:  10 kg (22 lbs) net

 

Thorens TD-403 DD turntable

Direct drive turntable with Ortofon 2M Blue cartridge

Features

Stable and super silent direct drive

THORENS TP 150 tonearm

Detachable SME Headshell

Massive 1.4 kg and 22mm-thick Die-cast aluminum platter

Pre installed cartridge Ortofon 2 M Blue

 

 

 

With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick Die-cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model.

 

A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

 

The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.

The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

 

Specifications

Function:  manual record player

Drive System:  Direct drive

Motor:  DC motor 24V

Speeds:  33-1/3, 45 rpm.

Speed Select:  electronical

Platter:  12“ / 1,4 kg Die-cast aluminum platter with 22 mm hight

Tonearm:  Thorens TP 150 with SME headshell

Cartridge:  Ortofon 2M Blue with nude elliptical stylus

Phono Preamplifier:  no

Anti-Skating:  Anti-skating weight, which is adjusted on a nylon thread guided over a ruby bearing

Shut Off:  no

Power Supply:  External power supply 24V DC

Dimensions (W x H x D):  420 x 150 x 360 mm

Weight:  7,2 kg

Finish:  Black high gloss, walnut high gloss, top board aluminum

 

Luxman PX-99 turntable

Semi-Automatic Direct Drive Turntable

With the PX-99, Luxman has combined the most important features and performance with a striking and simple design.

The motor is direct drive, and has no noisy mechanical linkages and resonance-prone parts. It's also a quartz-locked motor, assuring you of accurate speed and stability.

The tonearm represents a new generation of low-mass, low-friction Luxman designs. It is statically balanced so you can adjust tracking force with exceptional accuracy. The headshell is low in mass, rigid, and removeable. And because the PX-99 is semi-automatic, the tone arm lifts off the record at the end of play, and allows the PX-99 to shut itself off.

A unique feature of the PX-99, when used with Luxman KX-Series cassette deck, the Auto Pause Output puts the cassette deck in the pause mode when the record has reached the end of play.

The PX-99 pays attention to everything that's critical in turntable design. Rumble is inaudible. Wow and Flutter can hardly even be measured. Tracking ability is flawless.

 

Features:

Optical Sensing Arm Lift System - when record playback is finished, the tonearm automatically lifts and shuts off the motor because the optical circuit senses the lift-off point, it makes no mechanical contact with the tonearm at all while playing records, so operation is smooth and accurate

Auto Lift Control Switch - the Auto Lift Control is useful for playback of records with a music groove engraved very close to the label. The tonearm is designed so it will not lift off, even at the innermost part of the disc.

New Static Balanced Straight-Light Tonearm - the PX-99's long straight arm has better trackability than the regular short S-shaped arm used on most turntables. It also has very low mass and low resonance. The Low Mass Arm realizes accurate sound reproduction even from high dynamic range, digitally recorded records.

Auto Disc Pause - when activated  a built-in circuit of the PX-99 automatically places your accompanying KX-100, KX-101 or KX-102 cassette deck in the pause mode from the record mode, when the record being taped reaches the end of play. Allows you to leave the system unattended while taping.

 

Specifications:

Turntable

Drive System:  Direct-drive

Motor:  Quartz Locked DC Servo Motor

Speed: 33-⅓ and 45 rpm

Platter: 300 mm aluminum diecast

Platter Wight:  1,6 kg

Wow and Flutter:  0,03% WRMS

Signal-to-Noise Ratio:  70 dB (DIN-B)

Tonearm

Type:  Static balance type straight tube arm

Material:  Aluminum

Effective Length:  214 mm

Overhang:  15 mm

Cartridge Height:  17 mm

Stylus Pressure:  0 to 3 g

Headshell:  Detachable (accepts Luxman head shell only)

General

Power Consumption:  9 watts

Dimensions (W x H x D):  440 x 148 x 350 mm (17-3/8" x 5-13/16" x 13-3/4")

Weight (net):  6,5 kg (14 lb 3 oz)

 

Cybernet CP-300Q turntable

Quartz Control Direct Drive Semi-Automatic Turntable

You can hear the difference in a Cybernet component. That's because Cybernet is a world leader and innovator in the field of electronics and designs all of its audio products to very exacting specifications. And that's why, whichever Cybernet component you purchase, you can be assured of excellent performance, incredibly accurate sound, high reliability and long life.

 

Quartz Control, Direct-Drive System

The CP-300Q combines one of the finest systems of rotational accuracy - quartz control direct-drive - with the exceptional convenience of front panel operation

The system starts with a full-cycle FG (Frequency Generator) servo motor. It incorporates full IC design for outstanding performance and reliability. With quartz control, you're assured of incredible rotational accuracy it any possible trace of speed drift is detected, corrective torque is immediately applied. The specifications verify the turntable's exceptional performance. Wow and Flutter is very low 0,05% WRMS, Signal-to-Noise Ratio is an inaudible -68 dB DIN-B. the result is sound quality true to the original source. And with front panel control, everything is right where you want it.

 

Semi-Automatic Turntable Control

To start operation of the CP-300Q, place the tonearm on the record surface. From there on, everything is totally automatic. When the end of a record is reached, the tonearm lifts up, returns to the rest position, and the turntable motor is shut-off. You won't have to worry about the stylus getting caught in the lead-out grooves of the record, which can happen with manual-type turntables. The result is less wear on your stylus, records and turntable.

 

Front Panel Controls for Optimum Convenience

The important operating controls of the CP-300Q are right on the turntable's front panel, making operation extremely easy and convenient. A speed selector provides a choice of two speeds; 33-⅓ and 45 rpm. A variable pitch control and illuminated stroboscope allow speed variations by up to ±4 %. Raising the pitch control knob allows the Quartz system to be removed. A "reject" button provides automatic return of the tonearm anytime during record play. And all these controls can be operated even when the dust cover is closed giving added protection to your records.

 

Low Mass, Tubular Aluminum Tonearm

The tonearm is of straight, tubular aluminum construction for excellent damping of outside vibrations. Its low-mass design, and finely machined, low-friction bearings, provide excellent tracking ability and exceptional sound quality.

 

High Feedback Resistance

The CP-300Q features base construction incorporating individual rubber feet to isolate any source of mechanical or acoustical feedback. By effectively resisting outside vibrations, the result is clean, accurate sound reproduction.

 

Smooth Tonearm Set-Down with Viscous-Damped Cueing

The cueing system is viscous oil-damped, allowing smooth, gradual descent of the tonearm. Operated with the manual cueing lever located next to the tonearm, oil-damping provides greater precision, reduced needle bounce and less chance of record damage.

 

Pitch Control with Illuminated Stroboscope

The CP-300Q provides (by pulling up the pitch control knob) a variable pitch control for both 33-⅓ and 45 rpm speeds. In combination with the easy -to-read illuminated stroboscope you can vary the speed up to ±4%. This lets you speed up or slow down a record, allowing alignments of pitch for any accompanying instrument.

 

Other Features

Hinged, spring-loaded detachable dust cover

45 rpm adaptor

Low-static rubber turntable mat

 

Specifications

Turntable Section

Type:  Quartz Control Direct-drive Semi-automatic turntable

Motor:  Magnet Field DC, FG Servo Controlled Motor

Turntable Platter:  310 mm aluminum diecast

Turntable Speeds:  33-⅓ and 45 rpm

Wow and Flutter:  0,05% WRMS

Signal-to-Noise Ratio:  -68 dB, rated (DIN-B)

Tonearm Section

Type:  Straight, aluminum tubular tonearm with adjustable counterweight, calibrated anti-skating adjustment, viscous-damped cueing

Effective Length:  213 mm

Adjustable Tracking:  Direct-reading scale

Overhang:  16 mm

Acceptable Cartridge Weight:  4 - 16 grams

General

Power Requirements:  AC 120 V, 220 - 240 V, 50/60 Hz

Power Consumption:  5 W

Dimensions (W x H x D):  420 x 133 x 382 mm (16-9/16' x 5-1/4" x 15-1/16")

Weight:  6 kg (13 lbs)

 

Cybernet CP-200D turntable

Direct Drive Semi-Automatic Turntable

You can hear the difference in a Cybernet component. That's because Cybernet is a world leader and innovator in the field of electronics and designs all of its audio products to very exacting specifications. And that's why, whichever Cybernet component you purchase, you can be assured of excellent performance, incredibly accurate sound, high reliability and long life.

 

Direct Drive for Outstanding Performance

The Cybernet CP-200D incorporates a direct drive system to reduce potential sources of wow, flutter and rumble. By eliminating the use of high speed motors, bells or idlers, the direct drive system achieves outstanding performance. Wow and Flutter is reduced to a mere 0,05% WRMS, contributing to exceptional rotational accuracy. The Signal-to-Noise Ratio of -68 dB (DIN-B) translates into extremely quiet turntable operation. Combined, these advanced technologies contribute to the line sound quality of the CP-200D

 

Semi-Automatic Turntable Control

With semi-automatic control, when the end of a record is reached, the tonearm automatically lifts and returns to the rest position and the turntable is shut-off. A "reject" button will allow return of the arm at any point in the record. One of the major benefits of semi-automatic control is that your stylus won't stay continuously in the lead-out grooves of the record, as in manual turntables. This means less wear and longer life for the record turntable and cartridge stylus

 

Convenient Front Panel Controls

The most important operating controls are located right on the front panel for maximum convenience. A speed selector provides a choice of either 33-⅓ or 45 rpm. If you desire to change the speed slightly, a variable pitch control and illuminated stroboscope are provided for both speeds. A "reject" button allows return of the tonearm to the rest position. And all controls can be operated even when the dust cover is closed, thus providing extra protection for your records.

 

Low mass, Tubular Aluminum Tonearm

The tonearm is of straight, tubular aluminum construction for excellent damping of outside vibrations. Its low-mass design, and finely machined, low-friction bearings, provide excellent tracking ability and exceptional sound quality.

 

Base Material Resists Acoustic Feedback

The base of the CP-200D has been specially designed to provide high resistance against both mechanical and acoustical feedback. The dense cabinet material together with shock-absorbent feet provide resistance against vibrations that might otherwise tend to degrade the sound quality.

 

Viscous-Damped Cueing Control

The tonearm is viscous oil-damped for smooth lift or set-down when using the manual cueing lever. With viscous-damped cueing, the tonearm can be lowered onto the record with greater precision and less chance of cueing error.

 

Pitch Control with Illuminated Stroboscope

The CP-200D provides a pitch control with a plus or minus range of 4% for both 33-1-3 and 45 rpm. This effectively allows you to speed up or slow down the record. And an easy-to-see, illuminated stroboscope gives a visual readout for fine-adjustment of the turntable's speed.

 

FG Servo Control

One of the reasons for the outstanding rotational accuracy of the CP-200D is the FG (Frequency Generator) servo-controlled DC motor. Any possible trace of speed drift is automatically detected and immediately corrected. Full IC (Integrated Circuitry) design adds to the system's overall performance reliability.

 

Other Features

Hinged, spring-loaded detachable dust cover

45 rpm adaptor

Low-static rubber turntable mat

 

Specifications

Turntable Section

Type:  Direct-drive Semi-automatic turntable

Motor:  Magnet Field DC, FG Servo Controlled Motor

Turntable Platter:  310 mm aluminum diecast

Turntable Speeds:  33-⅓ and 45 rpm

Wow and Flutter:  0,05% WRMS

Signal-to-Noise Ratio:  -68 dB, rated (DIN-B)

Tonearm Section

Type:  Straight, aluminum tubular tonearm with adjustable counterweight, calibrated anti-skating adjustment, viscous-damped cueing

Effective Length:  213 mm

Adjustable Tracking:  Direct-reading scale

Overhang:  16 mm

Acceptable Cartridge Weight:  4 - 16 grams

General

Power Requirements:  AC 120 V, 220 - 240 V, 50/60 Hz

Power Consumption:  5 W

Dimensions (W x H x D):  420 x 133 x 382 mm (16-9/16' x 5-1/4" x 15-1/16")

Weight:  6 kg (13 lbs)

 

JVC QL-Y5F turntable

Electro-Servo Fully Automatic Quartz Turntable

The Flagship of JVC's Fine Line of Turntable

Features

E-D Servo tonearm for reduced resonance

Double-Servo Quartz control

Cog-free coreless DC servo motor

Electronic resonance-damping, tracking-force and anti-skate controls

Computerized fully automatic convenience with repeat

 

The design objectives for our top-of-the-line turntable were simple; eliminate all unwanted resonance, speed error, noise and vibration while offering fingertip computer control convenience. The superlative QL-Y5F attests to our success, and we were able to make it beautiful to boot Read on.

 

JVC E-D Servo tonearm

A genuine breakthrough

JVC engineers isolated "tonearm resonance" as the most inimical of all conceivable resonance in a turntable, since it colors reproduction, adds distortion (particularly intermodulation) and prevents accurate arm tracking. JVC's E-D Servo tonearm solves the problem of "sympathetic resonance". See the full description of this remarkable tonearm on the next page.

The E-D Servo tonearm - construction

Two coreless linear motors are used in the E-D Servo tonearm. One, housed inside the structure positioned to the right of the vertical bearing, controls and adjust the arm's vertical position in relation with the record's surface. The other, positioned below the tonearm base, controls and adjust the arm's horizontal position in relation to the record groove.

Even warped records are no challenge to the E-D Servo tonearm

The E-D Servo system successfully damped the tonearm to shut out audible damage caused by low-frequency infrasonic and external vibration. The result is better record tracking, lower distortion a higher signal-to-noise ratio and even better Wow and Flutter.

 

Our Improved Double-Servo Quartz system has made speed control 30 times more accurate

Speed accuracy is nearly flawless thanks to the Double-Servo Quartz speed detection system for the platter motor

 

Coreless DC servo motor is cog-free yet powerful

Our coreless DC servo motor has no cores for cog-free, smooth rotation, yet has 50% more torque than conventional coreless designs, thanks to a push-pull drive circuit.

 

Up-front, light-touch controls and fully automatic operation for a unique operating experience

All the controls for this JVC masterpiece are on the front panel. All arm movements - up, down, left and right - are possible in the manual mode via light-touch buttons. Full automatic operation is supervised by a microcomputer and initiated by the Start/Stop button.

 

Other features:

Repeat for infinite playback of one record

Solid one-piece headshell doesn't rattle or resonate

Height adjustable tonearm arrangement (±3 mm)

LED indicators for speed, quartz-lock, record size, repeat and arm cue

Rosewood veneer cabinet, polished to a rich mirror finish.

 

Specifications

Type:  Coreless DC servo motor

Drive System:  Direct-drive

Speed Detection System:  Integrated FG

Servo System:  Double-servo Quartz system

Speed Change:  Electronic Switching

Start-up Time:  1,2 sec.

Wow and Flutter:  0,025% (WRMS); 0,04% (DIN)

Signal-to-Noise Ratio:  78 dB (DIN-B)

Start-up Torque:  1000 g/cm

Speed Deviation:  0,002%

Load Characteristics:  0% (under 100 g loads)

Drift:  0,0001%/H

Voltage Drift:  0%

Thermal Drift:  0,00005%/°C

Platter

Size:  310 mm die0cast aluminum

Weight(with mat):  1,5 kg

Tonearm

Type:  Statically balanced electronic servo controlled arm

Effective Length:  245 mm

Tracking Error:  +1°48". -1°31"

Overhang:  15 mm

Applicable Cartridge Weight (headshell included):  14,5 - 24 g

Arm Elevation Range:  ±3 mm

Operation Mode:  Fully-automatic

General

Dimensions (H x W x D):  169 x 480 x 436 mm (6-5/8" x 18-7/8" x 17-3/16")

Weight:  10,5 kg (23,1 lbs)