The Myryad MI 120 Stereo Integrated Amplifier has been designed to offer a combination of high quality sound reproduction and elegant styling.
The amplifier can accept up to six line-level input sources, including two tape recorders. Outputs are provided for one pair of loudspeakers and for headphones. All functions – input selection, volume and standby – can be operated using the infra-red remote control handset.
The MI 120 offers a range of expansion possibilities:
- The AUX. input can be converted to accept the output from a phono cartridge by installing a Myryad Phono Cartridge
Pre-Amp Module.
- A low-level “Bi-amp” output is provided to feed the Myryad MA 120 Power Amplifier, allowing bi-amplified drive of suitable loudspeakers.
- The “My-Link” input/output can be coupled to other Myryad products which can then be remote-controlled via the MI 120’s infra-red receiver.
Specifications
Continuous Rated Power Output (at 8 Ω): 60 W (Min. power per channel, 2 0Hz – 20 kHz, both channels, <0.05% THD)
Rated Distortion (THD 20Hz – 20kHz): <0.05%
Dynamic Power IHF
At 8 Ω : 80 W
At 4 Ω : 120 W
At 2 Ω : 160 W
Slew Rate: >60 V/μsec
Damping Factor (ref. 8 Ω, 50 Hz): >100
THD, SMPTE I.M. and IHF I.M: <0.05%
Line Level Inputs (Tape 1, Tape 2, CD, Video, Tuner, AUX)
Input Impedance (R and C): 10 kΩ/420 pF
Input Sensitivity (ref. 60 watts): 250 mV
Maximum Input Signal: .>10 V
Signal-to-Noise Ratio A-weighted (ref. 60W): >104 dB
Signal-to-Noise Ratio A-weighted (ref. 1W): >86 dB
Frequency Response : 20 Hz – 20 kHz +0/-0.3 dB
Line Level Outputs
Bi-amp Output Impedance: 450 Ω
Output Level: 775 mV
Tape Output Impedance: 2 kΩ + source impedance
Power Requirements
Voltage (set by internal wiring): 120/230 V
Physical Specification
Dimensions (W x H x D): 436 x 95 x 303 mm
Weight, Net: 8.75 kg