FEATURES
75 Watts Minium RMS
per channel, at 8 Ohms, from 20 t0 20,000 HZ, with no more than 0,25% THD
Phase-Lock-Loop FM
Multiplex Demodulator
Variable Frequency
Tone Control Turnover Points and Mid-Range Tone Control - separate for each
channel with eleven detented positions for easily repeatable settings
Direct-Coupled (Full
Complementary) Output Amplifiers
Dolby
FM (75μS/25μS) De-Emphasis Switch.
Complete facilities
for two Tape Recorders with the ability to "dub" from either one to
the other
Front panel Tape
Dubbing Jacks
Multipath/Signal
Strength Meter.
For over three years
the Marantz 2270 was the standard by which all others compared their receivers.
Now, its successor, the 2275 carries that comparison one step futher. The 2275 boasts of a Phase-Lock-Loop FM Multiplex
Demodulator to assure maximum separation with
a minimum of distortion. The Multipath Indicator tells you the best
position of your FM antenna. The Variable Turnover Tone Controls provide a
flexibility for contouring the sound that is far superior to anything
previously available. Plus, there's a unique Dolby De-emphasis Switch for use
with an external adaptor - to accommodate Dolby FM broadcasts. There are
complete facilities for two tape recorders with the ability to "dub"
from either one to the other. And the pre-out main-in jacks permit convenient
use of any external device such as an equalizer or electronic cross-over. The
direct-coupled full complementary amplifier output circuitry assures crystal
clear highs and solid lows. The entire package is backed up with a full three
year parts, labor and performance guarantee.
A full Complement of Inputs and Outputs
In
addition to the standard phono and auxiliary inputs, two sets of tape inputs
and outputs are provided to facilitate copying from one tape deck to another.
Front panel dubbing jacks allow you to add a third tape deck without disrupting
any rear panel connections.
The
preamp-out/main-in jacks on the rear panel enable you to use the preamplifier
and amplifier sections independently. You get simplified connection of external
components such as noise reduction systems, equalizers and electronic
crossovers - and the ability to use the receiver's preamp section to drive a
separate power amplifier. Here's
another benefit: Connecting the preamp section directly to a tape deck enables
you to make specially equalized recordings by using the preamp's flexible tone
controls.
SPECIFICATIONS 2275
Rated Power
Output: 75 Watts (Minimum Continuous
Watts per Channel, Both Channels Driven)
Power Band: 20 Hz to 20 kHz
Total Harmonic
Distortion: 0,2%
Load Impedance: 8 ohms
I M Distortion (IHF
Method, 60 Hz and 7 kHz mixed 4:1 at Rated Power Output): 0,2%
Damping Factor (at 1
kHz): 60
Main
Inputs Sensitivity/Impedance: 1,0 V/75 kΩ
Frequency Response
(at 1W Output, 20 Hz to 20 kHz): ±20 dB
Pre-Amplifier
Section
Phono
Dynamic Range (Ratio
of Input Overload to Equivalent Input Noise):
96 dB
Equivalent
Input Noise (RMS, 20 Hz to 20 kHz): 1,5 μV
Input
Sensitivity and Impedance: 1,8 mV/47 kΩ
Frequency Response
(re. RIAA, 20 Hz to 20 kHz): ±0.75 dB
High Level Inputs
(Aux and Tape)
Input
Sensitivity and Impedance: 180 mV/85 kΩ
Output Impedance
Tape record: 200
Pre-Out: 900
Tone Controls
Bass: ±12 dB (50 Hz)
Mid: ±6 dB (700 Hz)
Treble: ±12 dB (15 kHz)
AM/FM SPECIFICATIONS
Quieting
Slope (Mono) 30 dB Quieting: 1,9 μV (10,8 dBf)
5 μV (19,2 dBf) : 55 dB
10 μV (25,2 dBf) : 60 dB
50 μV (39,2 dBf) : 70 dB
1000 μV (65,2 dBf) : 72 dB
Distortion
at 1000 μV (65 ,2 dBf, Mono)
100 Hz : 0,3%
1000 Hz : 0,25%
6000 Hz : 0,35%
Distortion
at 1000 μV 965,2 dBF, Stereo)
100 Hz : 0,4%
1000 Hz : 0,35%
6000 Hz : 0,55%
Distortion at 50 dB
Quieting (Mono and Stereo)
1000 hz : 0,6%
Hum
and Ni=oise at 1000 μV (65,2 dBf)
Mono : 70 dB
Stereo : 60 dB
Frequency Response
30 Hz to 15 kHz
Mono : ±1,0 dB
Stereo : ±1,5 dB
Capture Ratio
at 100
μV (45,2 dBf) : 1,8 dB
at
1000 μV (65,2 dBf) : 1,5 dB
Alternate
Channel Selectivity: 80 dB
Spurious Response
Rejection: 100 dB
Image Response
Rejection: 100 dB
IF Rejection
(Balanced): 100 dB
AM
Suppression at 100 μV (45,2
dBf): 62 dB
Stereo Separation
100 Hz : 35 dB
1000 hz : 42 dB
10 kHz : 30 dB
Pilot (19 kHz)
Rejection: 65 dB
AM
usable Sensitivity: 20 μV
Dimensions (W x H x
D): 17-5/16 x 5-3/8 x 14-3/8 inch
Weight: 37,9 Pounds