CX-1 CX-2
Pre-amplifier
ToP-ART™ Total Purity
Audio Reproduction Technology
The fundamental
reason behind the high performance of Yamaha audio components is a
comprehensive design philosophy that we call ToP-ART. It dictates that every
factor that could affect performance is analyzed and optimized. From circuit
design to individual internal parts to feet and knobs, nothing is left to
chance. With the result that each component attains its full potential, so you
enjoy the music the way the artist meant it to be heard.
The Direct Path to
Optimum Signal Purity
The photo below of
the CX-1's interior shows a conspicuous application of the ToP-ART concept. The
path the audio signal traveles is straight and direct, so from beginning to
end, it encounters the last possible amount of interference. The entire interior layout is symmetrical and
logical, resulting in extremely high 85 dB channel separation and ultra-low
distortion of 0,002%. And for the ultimate in signal purity, you can engage the
Pure Direct Switch, causing the signal to bypass teh tone control circuitry.
High Quality Parts
and Materials
In the upper reaches
of audio component performance, small details and even materials take on
increasing importance. Because gold is an excellent conductor and not
susceptible to corrosion, these components have gold plated input terminals and
headphone jacks. The CX-1 goes a step further, with 2-pin gold-plated solid
brass CD and Pre Out terminals for large-size cables. It also uses extremely
thick gold-plated wiring for signal routing. The front and side panels as well
as knobs, are made of extruded aluminum rather than cheaper materials likely to
resonate. Even the nuts and bolts are special types, used only in our separate
components. Our commitment to quality was total, and the results are worth
hearing.
Versatile Control
Centers
The Cx-1 allows you
to select seven different inputs; Cd, tuner, phono, aux, tape 1, 2, 3. It also
has a Rec Out Selector for direct selection of the source to be recorded and
three-way tape copying. This means you can listen to one source while recording
another.
The CX-2 has inputs
for two tape decks and for two VCRs, as well.It also provides a Rec Out
Selector.
Both components come
with a special Power Link cable for connecting them to the MX-1 or MX-2, so the
power amp will turn on and off with the preamp.
Other Notable
Features
Low-noise precision
4-gang Master volume control
High accuracy
Twin-element phono EQ amplifiers
Switchable phono
subsonic filter eliminates the rumble which some turntables may produce.
Center defeat Bass
and Treble controls
Remote Controllable,
Motor-driven Volume Control and Input Selector eliminate the noise and
distortion inherent in electronic switching systems.
20 dB Volume Control
Amplifier Using Pure Capacitive Negative Feedback Circuitry (CX-1)
Continuously
Variable Loudness Control maintains natural tonality at all listening levels
(CX-2)
Extra-Large,
Anti-Vibration (XL-AV) Feet specially designed to ensure that external
vibrations cannot affect amplifier performance.
30-key Remote
Control (CX-1)
63-Key
learning-Capable remote Control (CX-2)
Yamaha System Remote
Control Capability; allows you to control the major function of other Yamaha
system components from the amplifier's remote unit.
CX-1 Specifications
Input
Sensitivity/Impedance
Phono
MC : 100 μV/1 k, 220 ohms
Phono MM : 2,5 mV/
47 kohms
CD, Aux, Tuner, Tape
: 150 mV/47 kohms
Phono Maximum Inout
Level MM/MC: 7/180 mV (1kHz, 0,05% THD)
Output
Level/Impedance
Rec Out : 150 mV/2,5
kohms
pre Out : 1,5 V/47
ohms
Maximum Output
Voltage: 10 V (20 - 20,000 Hz, 1% THD)
Headphone Rated
Output: 4,5 V/68 ohms (RL=100 ohms)
Frequency
Response: 20 - 20,000 Hz, ±0,2 dB
RIAA Equalization
Deviation (Phono MC/MM): ±0,2 dB/±0,2 dB
Total Harmonic
Distortion (20 to 20,000 Hz)
Phono MC to RecOut
(3V) : 0,003%
Phono MM to RecOut
(3V) : 0,002%
CD, etc to Pre Out
(3V) : 0,002%
Signal-to-Noise
ratio (IHF-A-Network)
Phono
MC (500 μV Input Shortrd) : 90 dB
Phono MM (5 mV Input
Shorted) : 95 dB
CD (Shorted) : 110
dB
Residual
Noise (IHF-A-Network): 1,0 μV
Channel Separation
(vol. -30 dB)
Phono (Input
Shorted, 1 kHz/10 khz) : 80/70 dB
CD etc (Input 5,1
kohms terminaled, 1 kHz/10kHz): 85/65 dB
Filter
Characteristics (Subsonic): 15 kHz (-18
dB/oct)
Audio Muting: -20 dB
Gain Tracking Error
(0 to -60 dB): 2 dB
Dimensions (w x H x
D): 438 x 86 x 405 mm (17-1.4 x 3-3/8 x
15-15/16 inch)
Weight: 8,8 kg (19 lbs, 6 oz)
CX-2 Specifications
Input
Sensitivity/Impedance
Phono
MC : 100 μV/100 ohms
Phono MM : 2,5 mV/
47 kohms
CD, Aux, Tuner, Tape
: 150 mV/47 kohms
Phono Maximum Inout
Level MM/MC: 6/180 mV (1kHz, 0,05% THD)
Output
Level/Impedance
Rec Out : 150 mV/2,5
kohms
pre Out : 1,5 V/47
ohms
Maximum Output
Voltage: 10 V (20 - 20,000 Hz, 1% THD)
Headphone Rated
Output: 4,0 V/68 ohms (RL=100 ohms)
Frequency
Response: 20 - 20,000 Hz, ±0,2 dB
RIAA Equalization
Deviation (Phono MC/MM): ±0,3 dB/±0,2 dB
Total Harmonic
Distortion (20 to 20,000 Hz)
Phono MC to RecOut
(3V) : 0,004%
Phono MM to RecOut
(3V) : 0,002%
CD, etc to Pre Out
(1,5V) : 0,002%
Signal-to-Noise
ratio (IHF-A-Network)
Phono
MC (500 μV Input Shortrd) : 82 dB
Phono MM (5 mV Input
Shorted) : 94 dB
CD (Shorted) : 110
dB
Residual
Noise (IHF-A-Network): 1,0 μV
Channel Separation
(vol. -30 dB)
Phono (Input
Shorted, 1 kHz/10 khz) : 75/65 dB
CD etc (Input 5,1
kohms terminaled, 1 kHz/10kHz): 75/60 dB
Filter
Characteristics (Subsonic): 15 kHz (-18
dB/oct)
Audio Muting: -20 dB
Gain Tracking Error
(0 to -60 dB): 2 dB
Video Input
Sensitivity/Impedance: 1 Vp-p/75 ohms
Video Output
Level/Impedance: 1 Vp-p/75 ohms
Dimensions (w x H x
D): 438 x 86 x 319 mm (17-1.4 x 3-3/8 x
12 inch)
Weight: 5,4 kg (11 lbs, 14 oz)
Nessun commento:
Posta un commento