The ST-530 is
gracefully slim lines Direct Drive fully
automatic turntable.
Rotation accuracy is
a leading feature of the 20-pole 30-slot direct-drive motor which is the heart
of this fully automatic turntable. Pushbutton operations are all performed at
the front panel and there is no need to lift the dust cover.
Slimlines without
acoustic feedback.
A slim cabinet was
made possible by special design of the motor and its installation. The
independent suspension will not allow button operation to influence platter
stability. The sturdy and hefty base plate keeps the motor in position and
vibration is not transmitted.
All front operation
and fully automatic operation.
Cueing and all other
operations are performed from the front panel and there is no need to open the
dust cover except to change records. All you need to do is place your favorite
record on the platter and push the buttons. Play is then fully automatic ftom
cueing to arm return followed by power off.
Low Mass Straight
Tonearm.
The slim, low mass,
straight tonearm of this high quality turntable is ideally matched. The pivot
head has a horizontal axle and high precision steel ball bearings for the
ultimate in smooth operation.
Oil-damped cueing.
Your valuable
records can be damaged if the needle strikes the record when it is cued. This
is eliminated with oil-damped cueing as the stylus comes to rest in the groove
so gently it does not have any impact shock at all.
High cost
performance
High performance has
been incorporated into this turntable while great efforts were amde to keep
cost down. The result is a low cost high performance turntable that can satisfy
the demands of the most particular user.
Specifications
Turntable
Motor: 20-pole 30-slot 3-phase brushless type DC
servo controlled direct drive motor
Sppeds:
33-1/3" and 45" r.p.m.
Speed Calibration:
Pitch control ±3%
Wow &
Flutter: 0,055% (WRMS); ±0,085% (DIN 45507)
Rumble:
Unweighted : 40 dB
(DIN 45539A)
Weighted : 68 dB
(DIN 45539B)
Turntable
Platter: 308 mm aluminum alloy die-cast
with strobe outside rim
Tonearm
Type: Straight-line tubular, static balence type
with removable headshell and antiskating device
Effective
length: 222 mm
Overhang: 16,8 mm
Adjustable Tracking
Force: 0 -2.5 g with direct readout
weight
Usable Cartridge
Weight: 4 - 6.5 g
Cartridge model MM3 (Optional)
Type: Moving Magnet Type, 0,6mil diamond stylus
Frequency
Response: 20 - 20,000 Hz
OUTPUT voltage: 3 mV
±3 dB at 1 kHz 3.54 cm/sec
Channel
Balance: Within 2 dB at 1 kHz
Channel
Separation: more than 18 dB at 1 kHz
Load
Resistance: 47 kohm
Weight: 4,6 g w/ spacer
Optimum Stylus
Force: 1,8 g
General
Functions:
Automatic start (for
30 and 17 cm records), automatic return, automatic shut off and repeat.
Power Source: 22V 50 Hz for Europe; 120 V 60 Hz for North
America
Power
Consumption: 6 watts
Dimensions: 416 x 116 x 362 mm
Weight: 5,6 kg
Nessun commento:
Posta un commento