Features
Tandberg TA 300
Specifications
better than DIN standard 45500
RIAA
equalized preamp for magnetic pickup
High- and
Low-cut filters
Loudness
compensation added to volume control
Inputs for 2
record players and 2 tape machines (tape/monitor function)
Front jacks
for 2 stereo headphones
Front
input/output for extra tape machine on the TA 300
Microphone
amplifier and mixing capability on the TA 300M
Specifications
Nominal
Power Output (0,3% THD at 1kHz, DIN):
2 x 35
Watts RMS into 4 Ω
2 x 25
Watts RMS into 8 Ω
Music
Power Output: 2 x 50 Watts into 4 Ω
Harmonic
Distortion (power output 1 dB below nominal value and lower):
0,2%
at 4 Ω
0,15%
at 8 Ω
Intermodulation
Distortion: 0,4% (in output stage at 8 Ω)
Damping
Factor: 30 at 4 Ω; 60 at 8 Ω
Power
Bandwidth:
15 -
50,000 Hz into 4 Ω
10 -
80,000 Hz into 8 Ω
Frequency
response: 15 - 50,000 Hz (-1,5 dB with
linear inputs)
Treble
Control: ±17 dB at 10,000 Hz
Loudness: +12 dB at 10,000 hz
Bass
Control: ±15 dB at 50 Hz
Loudness: +12 dB at 50 Hz
Low-cut
Filter: -3 dB at 70 Hz (-12 dB/octave)
High-cut
Filter: -3 dB at 7000 Hz (-12 dB/octave)
Channel
Separation:
Phono 1 and
2 ; 60 dB
Tape 1 and 2
: 60 dB
Tuner : 65
dB
Signal/Noise-and-Hum
(reference 50 mW, nominal input signal, peak values):
Phono 1 and
2 : 55 dB
Tape 1 and 2
: 83 dB
Tuner : 60
dB
Signal/Noise-and-Hum
(reference max. power output and nominal signal input) :
Phono 1 and
2 : 60 dB
Tape 1 and 2
: 83 dB
Tuner : 79
dB
Sensitivity
(nominal power output at 1 kHz into 4 Ω)
Phono 1 and
2 : 2,5 mV
Tape 1 and 2
: 75 mV
Tuner : 60
mV
Power
requirements: Selector for 115/220/240 V
Ac, 50 or 60 Hz
Power
Consumption: 10 - 180 Watts
Dimensions
(W x H x D): 430 x 87 x 243 mm
(16-7/8" x 3-7/16" x 9-5/8")
Weight: 5 kg (11 lbs)
Nessun commento:
Posta un commento