Specifications
Power
Amplifier Section
Rated Output
Power (2-channels driven):
28
watts per channel at 4 Ω (minimum
RMS) from 20 to 20,000 Hz with no more
than 0,3% (THD)
25
watts per channel at 8 Ω (minimum
RMS) from 20 to 20,000 Hz with no more
than 0,2% (THD)
2 x 30
watts into 4 Ω at 1 kHz, with no more
than 0,3% THD
2 x 30
watts into 8 Ω at 1 kHz, with no more
than 0,2% THD
Power
Bandwidth (IHF): 10 Hz to 40 kHz/8 Ω (Total
Harmonic Distortion: 0.2%)
Signal-to-Noise
Ratio (IHF) ;
Phono: Better than 75 dB
Aux: Better than 95 dB
Residual
Noise: Less than 0.7 mV at 8 Ω
Channel
Ssparation (lHF) Phono: Better than 45
dB at 1,000 Hz
Damping
Factor: More than 50 (1 kHz, 8 Ω)
Output
Speakers: A, B (4 to 16 Ω)/A + B (8 to 16 ohms)
Output
Headphone: 4 to 16 Ω
Preamplifier
Section
Input
Sensitivity/Impedance;
Phono: 3 mV/47 k Ω
Aux: 150 mV/l00 k Ω
Tuner: 150 mV/100 k Ω
Tape Monitor (PIN/DIN): 150 mV at 100 k Ω / 30 mV
at 80 k Ω
Tape
Rec Output Level/Impedance (PIN/DIN):
150 mV at 100 k Ω / 30 mV at
80 k Ω
Frequency
Response
Phono (RIAA
Standard): 30 Hz to 15 kHz +1 dB, -1 dB
Tuner, Aux,
Tape Monitor: 10 Hz to 40 kHz
+0 dB, -1 dB
Tone
Control;
Bass: ±8 dB at 100 Hz
Treble: ±6 dB at 10 kHz
Loudness
Control: +9 dB at 100 Hz, +4 dB at 10
kHz (Volume control set at -30 dB position)
Miscellaneous
Semiconductors: Transistors - 3, Diodes - 4,
IC's - 2
Power
Requirements: 110/220/240V , 50/60 Hz
Dimensions
(W x H x D): 380 x 130 x 220 mm, (15 x
5,1 x 8,7 inches)
Weight: 6.2 kg,
(13.6 lbs)
No comments:
Post a Comment