What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Linn Majik-I

 The Linn Majik-I control amplifier uses microprocessor control, Linn's solid state input switching and volume control technology, and the latest surface mount manufacturing techniques to deliver unprecedented audio performance and ease of use.
The Majik-I accommodates six input sources, and provides outputs for two tape decks. 
Separate pre-amp output and power amp inputs provide exceptional flexibility, and offer the possibility of an economical upgrade to active susystems. Two sets of speaker sockets facilitate bi-wiring. Future options will include multi-room modules and a tuner which will simply plug into the internal expansion port.

Like any electronic product, the Majik-I will perform at its best when used with the highest quality source. The better the sound from your turntable, tuner or CD player, the better the sound you will hear from the other components in the system.
Specifications:
Preamplifier Section
Sensitivities for 0,7V RMS at line Output , 1 kHz into 2 k Ω load
Inputs Sensitivity/Load:
Phono MM :  3,1 mV /47 k Ω /68 pF
Tuner, CD, Aux, Tape :  300 mV / 10 k Ω
Outputs:
Tape (Equal to Aux input level, unity gain): 
Output Impedance:  100 Ω
Minimum Load :  5 k Ω
Line Output:
Output Impedance :  200 Ω
Minimum Load (on line outputs):  1 k Ω total
Headphone:
Output Impedance :  less than 8 Ω
Output Level :  Same as preamp output level
Output Current Limit :  60 mA
Load Impedance :  8 to 2000 Ω
Power Amplifier Section
Power Output:
66 W per channel into 4 Ω
33 W per channel into 8 Ω
Input Impedance:  10 k Ω
Voltage Gain:  28,5 dB
Input Sensitivity:  592 mV RMS for 16,2 V RMS output (33 W into 8 Ω)
General:
Power Consumption:  320 VA max.  25 Watts idling
Mains Supply Fuse:
100 V and 115 V :  T6, 3A antisurge
230 V :  T3, 15A antisurge
Main Supply Tolerance:  Nominal ± 10% with no performance change
Dimensions (W x H x d):  320 x 80 x 326mm
Weight:  4,9 kg

Nessun commento:

Posta un commento