"Beauty
lies in the balance between harmony of the whole and the proportion of the
details.
Beauty is
Harmony and from here we begin, to create a form which will provide the best
musical reproduction.
The
sound-stage will open up in front of you: imagine yourselves seated comfortably
in the armchair of a theatre while you enjoy the artists` performance in a
spectacularly involving way - from the most delicate single instrument up to
the might of a full orchestra. You will be literally immersed in the flow of
the music and transported into living the emotion."
The
multi-faceted shape was the starting point in 1989 with the Diapason Adamantes
, a model in continuous production longer than almost any loudspeaker in the
world, and still today a reference for the listener who wishes to immerse
himself in the emotion that it can provide. Adamantes is a legend whose
evolution brings forth now another legend: Dynamis.
The 14 sides
of Dynamis have proportions and planes carefully calculated to tune the
loudspeaker, exactly in the manner of a musical instrument. Its
carefully-studied form with just two parallel sides minimizes internal
standing-waves and enables the drivers to produce linear emission with optimum
dispersion in the listening area, thus giving a close approximation of the
ideal single-point source.
DYNAMIS
The
cabinet is made from high-density MDF using Diapason`s tried and tested
assembly technology developed from years of building the Astera, Adamantes and
Karis models.
A
special GRP covering layer is then applied to give the loudspeaker long-term
solidity as well as an improvement in sonic performance.
Italian
Master Craftsmen - specialists in luxury finishing - then give the final touch
to Dynamis by applying whatever colour or material that your imagination may
suggest, to create in any listening environment a strong and original
appearance statement.
Tradition
and innovation blend together in harmony in the choice of technology for the
drivers.
A large
magnet system on paper Nextel coated midrange driver is used in order to have a
very long coil excursion with very low distortion and an excellent transient
response. Midrange is matched with an extraordinary silk soft dome tweeter
provided by large magnetic flow; woofer completes the frequencies range giving
a solid performance , impressive deep and controlled bass range performance.
The
cross-over uses finest quality components and is built and wired entirely by
hand in order to exclude any possibility of loss or phase rotation, and to
ensure excellent dynamics under all conditions.
The
quest for perfection is inherent in this loudspeaker and evident in the care
taken with every detail.
The
elegant connectors made by Diapason guarantee perfect contact with any system
of cabling; the plinth is supplied with anti-scratch swivelling castors to make
room placement easy, as too for the lower reflex port. The front baffle slope
has been designed to allow pefect alignment of the drive units. The drivers are
individually protected by a fixed, acoustically transparent grille which is
attached to the loudspeaker by means of magnets, and which also enhances the
beauty of the Dynamis design.
SPECIFICATIONS
Type: 3-way, reflex system
Frequency
Response: 24 - 20.000 Hz (±3 dB)
Tweeter: Ø 29 mm silk soft
dome
Midrange: Ø 18 cm paper cone
Nextel coated
Woofer: Ø 30 cm Alu cone
Fiber glass dust cup
Efficiency: 89 dB/W/m
Crossover Frequency: 4.600 Hz
Nominal
Impedancee: 4 Ω
Min.
Impedance: 3,4 Ω /200 Hz
Finish: metallic bronze, glossy white, dark grey,
China red, metallic silver or other colour on demand
Dimensions
(W x H x D): 450 x 1275 x 685 mm
Weight : 100
Kg (net 1 speaker)
No comments:
Post a Comment