Search this site

Labels

4-channel ACCUPHASE ACOUSTIC ENERGY ADC ADCOM ADS ADVENT AIFAI AIWA AKAI AKG Alchemist ALIANTE ALLISON ALTEC LANSING AMPEX amplifier AMPLIFON ANCIENT AUDIO AR ARCAM ARISTON ARMONIA AUDIA AUDIO ACADEMY AUDIO ANALOGUE AUDIO DYNAMICS AUDIO INNOVATIONS AUDIO NOTE AUDIO RESEARCH AUDIO-TECHNICA AUDIOLAB Audiostatic AUGUSTA AVALON AVID AXIOM B-I-C Bang & Olufsen BASF BASSOCONTINUO Bell Belt-Drive BEVERIDGE BEYER-DYNAMIC BOSE BOSTON BOWERS-WILKINS BOZAK BRAUN BRIONVEGA BSR California Audio Labs CAMBRIDGE CANTON cartridge CARVER CASTLE CD Player CD Transport CEC CELESTION CEMARK Centrex CERWIN-VEGA CHARIO CHARTWELL CIZEK CLARION CONRAD-JOHNSON COPLAND CORAL CORAL ELECTRONIC CREEK CROWN CYBERNET CYRUS DAC DAHLQUIST DALI DAT DBX DECIBEL DENON DIAPASON direct-drive Ditton DOKORDER DOMA DUAL DYNACO DYNAUDIO DYNAVECTOR EISA ELAC ELECTRO-VOICE EMPIRE EMT EPI EPICURE EPOS ES Series ESB Esotec ESOTERIC ESS EUMIG FAIRCHILD FOSTEX GALACTRON GALE GARRARD GENELEC GENESIS GIUSSANI RESEARCH GOLDENOTE GOODMANS GRAAF GRUNDIG H.H. SCOTT HAFLER HARBETH HARMAN/KARDON headphones HEATHKIT HECO HIRTEL HITACHI HPM idler INDIANA LINE INFINITY italian JAMO JANSZEN JBL JEFF ROWLAND JENSEN JMLAB JVC KEF KENWOOD KLH KLIPSCH KOSS KRELL KYOCERA LAE Lafayette lathe LEAK LECTOR LENCO LESA linear LINN loudspeaker LOWTHER LUXMAN LYNGDORF MAGNEPLANAR MARANTZ MARK LEVINSON MARTEL MARTINLOGAN MARUNI MASH MAXELL MBL McIntosh McLAREN MERIDIAN MERITON MICRO SEIKI MICRO-ACOUSTICS MIRAGE MISSION MITSUBISHI MONITOR AUDIO MONRIO MORDAUNT-SHORT MUSICAL FIDELITY MYRYAD NAD NAGRA NAKAMICHI NHT NIKKO NORESCO NOVA ONKYO OPERA OPTONICA ORTOFON PANASONIC PARADIGM PATHOS PEARL PHASE LINEAR PHILIPS PICKERING pioneer POLK AUDIO Power-amplifier Pre-amplifier Pre-phono Pro-Ject PSB QUAD quadraphonic RADFORD RCF receiver Reel to Reel REK-O-KUT REVOX ROGERS ROKSAN ROTEL ROYD RUARK SACD SAE sansui SANYO SENNHEISER SHARP SHERWOOD SHURE SIARE SIGNET SME SOMA SONAB SONUS FABER SONY SOTA Soundcraftsmen SPECTRAL Spica STANTON STAX Stereo 8 STILE ITALIANO STRUSS SUGDEN SUPERSCOPE Synthesis TAC TAD TAMON TANDBERG tangential TANNOY TASCAM TDK TDL TEAC TECHNICS THE FISHER THIEL THORENS tonearm TOSHIBA TRANSCRIPTOR TRIO tuner turntable ULIX Uni-Q UNISON RESEARCH unitra UREI UTAH VANDERSTEEN VOCE DIVINA VPI WADIA WHARFEDALE XAVIAN YAMAHA ZENITH ZINGALI

What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Sony PS-X800 turntable

 

The Perfect Match - The Biotracer Tonearm and Tangential Tracking

The PS-X800 is designed for audiophiles and music lovers who will settle for nothing but the very best reproduction of music from their record collection. Careful attention was given to each detail of the PS-X800 to make it the new standard against which every other turntable will have to be measured.

Outstanding Features:

Tangential Biotracer tonearm for minimum distortion, excellent soni performance

Biotracer tonearm elicits the best performance from the widest variety of cartridges

Biotracer actively damps tonearm/cartridge resonance and achieves wide stereo separation

Biotracer controls tracking force, anti-skating and tonearm automatic functions

 


Tonearm

Advanced fully automatic operation is silent and responsive for total convenience

Automatic zero-balance for fast interchange of cartridges

Tonearm may be "indexed" left and right at high or low speed without lifting dust cover.

Feather-touch controls respond to the slightest finger contact for fast, effortless function selection

Automatic record-size selector permits precise and safe indexing

Audio muting circuit provides silence during start, return, and cueing phases

Luminous end-of-disc sensor frees the tonearm from mechanical linkages for improved reliability

Capable of operation in synchronization with selected Sony cassette decks using the optional Sony RM-65

Repeat mode for continuous music

Accepts universal headshells and cartridge/headshell combinations

 

Turntable

Quartz lock with Magnedisc servo control prevents even minute speed variations caused by external factors

The Sony Linear Torque BSL motor designed for uniform and smooth delivery

Of torque

Electromagnetic braking provides rapid and smooth half of platter rotation

Sony Bulk Molding Compound base is both rigid and acoustically inert to reduce feedback

Adjustable, gel-filled feet isolate turntable from external vibrations

 


The tangential Biotracer tonearm

The Sony PS-X800 is the first turntable to combine the advantages of tangetial tracking with the low-frequency performance of a stable tonearm foundation. Like other straight-line tracking turntables, the X800 uses a tonearm mounted on a moving platform. However, unlike any other tangetial arm in the world, the tonearm of the X800 incorporates Sony's innovative Biotracer design.

The Biotracer's automated Motional Feedback (MFB) system constantly senses and corrects for tonearm vibration. For this reason, the arm provides all the advantages of a solid foundation: full-bodied, detailed low frequencies. And you get the reduced distortion, and improved stereo separation associated with tangential tonearms.

 the Biotracer tonearm of the PS-X800 is the first design to fulfill the promise of straight-line tracking. Quite clearly, the combination of the Biotracer tonearm and the tangential configuaration results in a joyful musical experiance.

 


Uni-Motion design for superior precision

He tangential Biotracer arm provides still more benefits. Other straight-line tracking arms require some slight tracking error to keep the arm moving forward. These tonearms are in a constant state of correcting tracking error. In contrast, the PS-X800 incorporates Uni-Motion design. Uni-Motion brings the tonearm slowly towards the center of the record, even when no tracking error is detected. As a result, the tangetntial Biotracer maintains superior groove tangency. Phase differences between the stereo channels are dramatically reduced. This results in a stable stereo image, with outstanding spatial characteristics.

As a final measure of precision, the vertical tonearm bearings, so important to tonearm function, are made to extremely close dimensional tolerances. Situated in Sony's long-span pivot, they provide the final assurance of exquisite performance.

The PS-X800, with its Biotracer tonearm and straight-line tracking displays exceptionally lower distortion, extraordinary stereo separation and greatly improved reproduction of the inner grooves of all records,  most important, the Biotracer tonearm is unique in providing the solid, vibration-free tonearm base necessary for superior music reproduction.

 

Specifications

Operation Type: Fully-automatic

Tonearm

Type:  Tangential Biotracer

Effective Length:  180 mm (7-1/8 ")

Overhang:  0 mm (0 ")

Tracking Error:  ±0,05°

Usable Cartridge Weight (including headshell): 10 -17g; 16 - 23 g; 22 - 29 g

Supplied Headshell:  SH-156 (7.2)

Effective Mass (without cartridge): 

Turntable

Drive System Motor Direct, BSL - Yes

Magnedisc Servo Control - Yes

Quartz Lock, with Indicator - Yes

Wow and Flutter

WRMS :  0,025%

DIN-45507 :  ±0,03%

FG Direct Measurement:  0,015%

Signal-to-Noise Ratio (DIN-B): 78 dB

Speed Accuracy:  better than 0,003%

Start-up Time at 33-⅓ rpm:  1/2 rotation

Platter Diameter:  320 mm (12-5/8")

Platter Weight (with rubber mat):  1075 kg (3 lb 14 oz)

Speeds:   33-⅓ and 45 rpm

Electromagnetics Breaking:  Yes

Others

Power Requirements:  AC 120 V

Power Consumption:  45 Watts

Dimensions (W x H x D):  440 x 120 x 440 mm (17-5/16" x 4-3/4" x 17-5/16")

Weight:  11,6 kg (25 lb 10 oz)

Sony Biotracer tonearm

Biotracer.  The World's Most Advanced Tonearm

 

The tonearm problem - every tonearm functions to hold the cartridge, enabling the cartridge to trance the record groove. While this task is simple to describe, doing the job well is anything but simple. To prevent sonic coloration, the tonearm must be strong, a requirement that suggests heavy-duty construction. Yet some cartridges require low tonearm mass. At some frequencies the tonearm must be inert and immune to vibration - while at others it must move without resistance. And the tonearm must handle the imperfections of real-world records; warp and inaccurate centering.

All of the traditional methods of coping with these problems have dealt in pure mechanics. Sony has now taken a bold step beyond mechanics to find a solution to the troubles that have puzzled designers since the first turntables were presented to the world.

 

The Biotracer solution

Conventional tonearms are passive objects moved only as a result of external force. In contrast, Sony's new Biotracer tonearm is radically different. The Biotracer moves under the constant control of two separate motors that are guided by a "brain" - a sophisticated multi-function micro-computer. As a result the Biotracer tonearm is an active contributor to exquisite performance. In fact, it is the solution to a number of problems that have plagued turntable designers and music lovers.

The Biotracer damps resonance

It is an unfortunate fact that many cartridge/tonearm combinations produce unwanted resonances which distort the music. The Biotracer tonearm damps these unwatnted resonances consistently. Music reproduction is crystal clear and undistorted.

 


The Biotracer accepts the widest variety of cartridges

The problem of resonance limits even the finest conventional tonearms to a relatively small number of compatible cartridges. The Biotracer's ability to damp the unwanted vibrations of tonearm resonance means that you are free to choose from the widest variety of cartridges - moving magnet or moving coil - including the latest high-compliance models.

The Biotracer reduce modulation noise

In conventional tonearms, unwanted stylus motion results in modulation noise - a blurring of proper musical pitches. The Biotracer tonearm dramatically reduces such noise, for clear, crisp sound.

 

The Biotracer provides added precision

As music lovers are awere, the anti-skating and tracking force systems of conventional tonearms cannot be completely accurate. This is because record warps and eccentricities tend to alter the effective forces. You get mistracking and premature record wear. The Biotracer tonearm senses and immediately corrects for such external influences, automatically. You get perfect tracking. As an added benefit, you can even vary the tracking force while the record is playing, for the clearest possible sound.

The Biotracer tonearm does more than incorporate the latest in magnetic, microprocessing and electro-mechanical technology, it ends the long-standing compromises embodied in conventional tonearms, its precise operation, response to command and its extraordinary contribution to musical sound represent a significant advance in the state of the art..


 

Sony PS-X500 turntable

Extraordinary Performance with the Biotracer Tonearm

All of the performance and convenience features of the automatic-lift PS-X500 complement the Biotracer tonearm incorporated in both of these remarkable components.

 


The conception of the Biotracer tonearm represents a sharp departure from conventional wisdom. The common approach to tonearm dsign involves eleborate, separate mechanisms that deal individually with stylus force, skating force and tonearm/cartridge resonance. In contrast, the Biotracer tonearm in the PS-X500 deals with all of these functions in an integrated, unified fashion. There is no manually adjustable anti-skating control, no mechanical linkages for cueing, automatic indexing or automatic shut-off.

PS-X500 features manual operation with automatic tonearm lift and motor-shut-off at end of play

 


Specifications

Turntable Platter:  320 mm (12-5/8 in.), aluminum-alloy diecast

Motor: Linear BSL (brushless and slotless) motor

Drive System:  Direct drive

Control System:  Quartz lock control, magnedisc servo control system

Speed: 33-1/3 rpm, 45 rpm

Starting Characteristics:  Comes to nominal speed within a half revolution (33-1/3 rpm)

Wow and Flutter:  0:015 (WRMS)* 0.025% (WRMS) ±0.03% (DIN)

Signal-to-Noise Ratio:  78 dB (DIN-B)

Load Characteristics:  0% up to 150 g stylus force (at lead-in groove of a record)

Speed Deviation:  Within +0.003%

Tonearm

Type:  Electronic tonearm

Pivot-to-Stylus Length:  216.5 mm (8-5/8 in.)
Overall Arm Length:  295 mm (11-5/8 in.)

Overhang:  16.5 mm (24/32 in.)

Tracking Error:  +3°,-1°

Stylus Force Adjustment Range:  O-3g

Cartridge Shell Weight:  5g

Cartridge Weight range (including supplied cartridge shell):  7,5-12,5g (12-17 g with extra weight)

General

Power Requirements

Type 1:  220V AC

Type 2:  240 V AC

Type 3:  110 - 120 or 220 - 240 V AC adjustable 50/60 Hz

Power Consumption:  13 W

Dimensions Approx. (W x H x D) :  430 x 120 x 385 mm  (17 x 4-3/4 x 15-1/4 in.) including projecting parts and controls

Weight Approx.:  8.3 kg (18 Ibs 5 02), net


 

Sony PS-X600 turntable

 

All of the performance and convenience features of the fully-automatic PS-X600 complement the Biotracer tonearm incorporated in this remarkable components.

Outstanding Features

Biotracer tonearm elicits the best performance from the widest variety of cartridges

Biotracer actively damps tonearm/cartridge resonance and achieves wide stereo separation

Biotracer controls tracking force, antiskating and tonearm automatic functions

 

Turntable and Construction

 

 

Quartz lock with Magnedisc servo control prevents even minute speed variations caused by external factors

The Sony Linear Torque BSL (brushless, slotless) motor designed for uniform and smooth delivery of torque

Electromagnetic braking provides rapid and smooth half of platter rotation

Sony Bulk Molding Compound base is both rigid and acoustically inert to reduce feedback

Adjustable gel-filled feet isolate turntable from external vibration

Tonearm may be "indexed" left and right at high or low speed without lifting dust cover

Automatic record-size selector permits precise and safe indexing

"Repeat" mode for continuous music

Capable of operation in synchronization with selected Sony cassette decks using the optional SONY RM-65

Tonearm and Functions

Advanced fully-automatic operation is silent and responsive for total convenience

Feather touch controls respond to the slightest finger contact for fast effortless function selection

Audio muting circuit provides silence during start, return and cueing phases.

Luminous end-of-disc sensor frees the tonearm from mechanical linkages for improved sensitivity,

 


Specifications

Turntable

Platter:  320 mm (12-5/8" ) aluminum-alloy diecast

Motor:  Linear BSL motor

Drive System:  Direct drive

Control System:  Quartz lock control, magnedisc servo control system

Speed:  33-⅓ and 45 rpm

Starting Characteristics:  comes to nominal speed within a half revolution (33-⅓ rpm)

Wow and Flutter:  0,015 WRMS (±0,03% DIN)

Signal-to-Noise Ratio:  78 dB (DIN-B)

Load Characteristics:  0% up to 150 g stylus force (at lead-in groove of a record)

Speed Deviation:  within ±0,003%

Automatic system :  Lead-in, return, reject, repeat, record size selection, anti-skating

Tonearm

Type:  Electronic tonearm

Pivot-to-stylus length:  216,5 mm (8-5/8")

Overall Arm Length:  295 mm (11-5/8")

Overhang:  16,5 mm (21/32")

Tracking Error:  +3°, -1°

Stylus Force Adjustment Range:  0 - 3 g

Cartridge Shell Weight:  5 g

Cartridge Weight Range (including Shell):  7,5 - 12,5 g (12 - 17 g with extra weight)

General

Power Requirements:  110 -120 or 220 - 240 V AC 50/60 Hz

Power Consumption:  16 W

Dimensions (W x H x D):  430 x 120 x 385 mm (17 x 4-3/4" x 15-1/4")

Weight:  8,5 kg (18 lbs 12 oz)

Garrard SLX-2 turntable

 

Growing up these days means growing up with sound. And now, more than ever before, people can grow at their own pace in their listening interests and the equipment they listen to. Many excellent "growth" systems need a fine record playing source but have gone without one of sufficient calibre because the cost was prohibitive.

Garrard has changed all this with the SLX-2 Automatic Turntable Module that strikes more than a happy medium in quality at an equally happy cost. All the basics of our best machines are here, including Garrard's exclusive Synchro-Lab Motor, for synchronous power, to guarantee perfectly constant record speed whatever the voltage or operating conditions. And the sleek tubular aluminum tonearm beautifully pivoted on precision ball bearings. There's a built-in calibrated gauge for correct stylus pressure setting, and an adjustable counterweight for perfect balance and tracking without distortion. The single lever cueing/pause control that gently raises and lowers the tonearm, protects the grooves and the stylus. Then there are all the operating conveniences, oversized turntable, single control for setting speed and record size, separate spindles for automatic and manual play, the unique swingaway overarm for unobstructed single record handling, the premounted coordinated base with convenient spindle storage compartments, and the versatile 3-position dust cover of heavy tinted styrene.

To top it off - a specially selected pre-installed magnetic cartridge with high compliance diamond stylus assembly makes the SLX-2 ready to plug in and play superbly through any high fidelity receiver.

 


SLX-2 Automatic Turntables features:

Complete with injection molded base and 3-position styrene dust cover

Synchro-Lab silent, constant speed motor

Kinetically-balanced turntable

Ultra-low mass tubular aluminum tonearm

Ball-bearing pivotry

Specially selected pre-installed magnetic cartridge

High compliance diamond stylus assembly

Precision tonearm adjustment calibrated at the factory

Built-in stylus pressure and counerweight adjustments

Oversized turntable mat with distinctive aluminum trim ring

Unique swingaway overarm for playing single records manually

Single lever cueing/pause control permitting safe tonearm handling, accurate "instant replay" or pausing

 

Specifications

Speeds:  33-⅓, 45 snd 78 rpm

Power Source:  110 volts, 60 cycles AC (50 cycle pulley available)

Dimensions (W x H x D):  16" x 8" x 15-1/4"

Garrard SLX-3 turntable

 

There are quiet excitements far from the modding crowd. Two people on the same wavelength, free to admit to each other they also like some of the deeper things, a quiet evening with some music, a magnificent - or corny - record shared together. There's a word for it; compatibility.

And you can see it reflected in the music system, component quality stereo, perhaps, good enough to make a loving sound pleasing to a cultivated ear.

Such a turntable is the Garrard SLX-3, most conveniently a pre-assembled module, it is as compatible a pre-assembled module, it is as compatible with the finest equipment it plays through as the couples that enjoy its music. It is a synchronous automatic turntable, has every professional feature the most advanced units in the Garrard component series have. The Synchro-Lab motor that guarantees perfectly constant speed and unwavering musical pitch, the record safety platform for safe, gentle two-point support in automatic play, the neat finger tab levers on the control escutcheon that run all the manual and automatic operations as if from a cockpit. The ultra-low mass aluminum tonearm. Studio cueing and pausing with viscous damped very gentle tonearm set-down both in manual and automatic play. And of course, the latest high compliance full range magnetic cartridge with elliptical diamond stylus and all the Garrard refinements for perfect tracking, the calibrated stylus pressure gauge with quick-reading window scale, the fully adjustable counterweight, the anti-skating control of patented sliding weight design.

 


SLX-3 Module Features:

A superb instrument with the most advanced Garrard automatic turntable:

Wired, ready to plug into any TV, radio, tape or cassette system with appropriate preamp

Oversize kinetically balanced lightweight turntable with handsome mat and aluminum trim

Silent Synchro-Lab constant speed motor

Exclusive two-point record support

Adjustment of latest instrument design for stylus tracking force, counterweight, and anti-skating

Pencil thin ultra-low mass tubular aluminum tonearm meticulously balanced for flawless tracking

Fully-damped single control cueing and pausing

Viscous-damped slow and gentle descent of tonearm during manual and automatic play

Finger-tip tab controls

Fine magnetic stereo cartridge with elliptical diamond stylus

Coordinated base and dust cover

 

Specifications

Speeds:  33-⅓, 45 and 78 rpm

Power Supply:  100 - 130 Volts 60 cycles AC (50 cycle pulley available)

Dimensions Cabinet: (W x H x D):  16-3/4" x 8-1/4" x 15-3/4"

Garrard X-10 turntable

 

At a teen tribal stomp, or an after dinner-party dance, the Garrard X-10 Module is the "partying kind". At the drop of a record, it is off-and-away for hours of carefree music reproduction of the highest quality. And except for an occasional fly-by to change a stack of records, it requires little or no attention. What is more, it is stil fresh for a bit of nightcap music after the last stroggler has left.

What gives it its stamina for precision performance anywhere it's called upon to play. The solid Garrard components that have gone into it, from the high torque "Induction-Surge" motor driving its oversize turntable to the meticulously balanced low-mass tubular aluminum tonearm. And for all of this, the X-10 is a joy to operate. Two simple levers to set the correct speed, record size, manual or automatic play. A unique over-arm that stead es as many as eight records for automatic play and swing out of the way for unimpeded single record play.

Separate automatic and manual spindles. A pre-installed forst quality stereo ceramic cartridge set for correct stylus pressure and accurate tracking, a fine high-compliance flip-over diamond stylus, and to better serve those "Play it again, Sam" types and preserve the records as well - a single lever control for easy cueing and pausing. This feature-filled complete record playing source comes pre-assembled on a coordinated slimline base with three-position dust cover

 

Specifications

Speeds:  33-⅓, 45, and 78 rpm

Power Source:  110 volts 60 cycles AC (50 cycle pulley available)

Dimensions (W x H x D)) 15-1/4" x 8" x 16"

Garrard X-11 "Demi" turntable

 

People in tight quarters, dorms or dens, pads or playrooms, are "spaced out" by the big sound of the compact Garrard X-11 "Demi". This fine space-saving machine packs more record playing capability than many a full scale turntable. Plays all size records at all speeds. Stacks up to eight records for smooth automatic play, steadied by a convenient swing-away overarm. And can even play a single manually or automatically. It has a tonearm rest that locks and unlocks automatically, and shut-oof is automatic too.

 

And is it ever built. Solid yet lightweight, it can take the kind of casual treatment to be expected in swinging quarters. The changer is virtually foolproof, cannot malfunction during cycling. The same goes for the high quality Garrard drive motor, you can count on it to run smooth and silent hour after hour, year after year with no special pampering.

Then there are all the ear-filling quality features that don't always meet the eye. The advanced design, low mass tubular aluminum tonearm so precisely balanced it follows the wildest groove like an angel. A first quality stereo ceramic cartridge with flip over diamond stylus, pressure adjusted for smooth distortion-free tracking.

And even if iti is small enough to tuck away in some convenient niche, Garrard has not stinted on its beauty. An ebony turntable on a green unit plate set off by en ebony pinseal base with sparkling silver trim and tinted styrene cover. It will glow from its hiding place.

 

A complete stereo record playing unit

Plays 4 speeds (33, 45, 78 and 16 rpm)

Plays all-record sizes (7", 10", 12")

Strong lightweight turntable

Separate spindles (short and long) for manual and automatic operation

Powerful Garrard-built induction motor

Prematched top quality name-brand ceramic cartridge

Flip-over long-life diamond stylus

Lightweight tubular aluminum tonearm

Convenient overarm stabilizer for stack of records swings away for manual play

Automatic tonearm lock

Automatic shut-off

Complete with injection molded base and sparkling dust cover

Completely wired; plugs into wall outlet and plays through any unit with phono input jack

Power supply at 110 volts 60 cycles AC (50 cycle pulley available)

Dimensions ((W x H x D)) 13-3/8" x 6-1/2" x 10-1/4"

 

SAE 3200 FM tuner

 

FM Digital Tuner

The SAE 3200 FM Digital Tuner offers the benefits of the latest circuit design while drawing upon the linear and digital technology developed for SAE's other superb FM tuner, the 8000. many of the features synonymous with SAE are present on the 3200; the precision tuning accuracy of a crystal-controlled digital readout; the low distortion and wide separation obtained with linear phase filters; the smooth, effect of side-skirt controlled muting. These features combine with others unique to 3200; precision 10-turn tuning potentiometer and varactor front-end for accurate tuning and excellent rejection of unwanted stations, direct reading LED displays for signal-strength and center-tuning. The resulting superior performance and unique simplicity of operation make the 3200 another Component for the Connoisseur.

 

Features

Electronic Front-End

This unique 4-section varactor front-end and its associated 10-turn tuning control potentiometer provides spurious response rejection of over 80 dB and IHF sensitivity of 10,3 dBf (1,8 µV)

LED Signal Strength and Center Tuning

The 5 section LED signal strength display indicates the actual signal strength received by the tuner. The 3 section LED center tuning displays center of station. When used in conjunction with the signal strength display they provide precise information necessary for proper tuning.

FM Muting

A unique side-skirt muting circuit eliminates off-channel interference and muting is "thump-free" due to stereo audio attenuators.

Antenna Inputs

Careful attention is paid to antenna termination to ensure the best signal reception possible. Inputs are provided for 300 Ω  flat lead and a special input for 75 Ω  coaxial cable.

Phase-Lock-Loop-Multiplex

This circuit is used in the reception of FM stereo, automatically locking the phase of the internal multiplex subcarrier oscillator to the incoming signal. This internal signal oscillator is not susceptible to transmission noise and has less intermodulation distortion products then the broadcasted subcarrier.

Digital Frequency Readout

Utilizing the latest LSI (Large Scale Integration) technology, four 7-segmented ruby LED's and crystal reference control the 3200 readout displays the exact station frequency, accurate to within 0,025% of the station frequency.

Linear Phase Filters

Sonically pure FM stereo requires that all signal components required for stereo must remain time aligned (in-phase). Since these components must pass through the IF filters to strip them of unwanted noise and distortion it is imperative that these filters have as little phase shift as possible. Our permanently aligned monolithic linear phase filters ensure exactly that.

 


Specifications

IHF Usable Sensitivity

Mono:  10,3 dBf (1,8 µV) at 300 Ω

50 dB Quieting

Stereo :  37,2 dBf (40 µV) at 300 Ω

Signal-to-Noise Ratio at 65 dBf

Mono :  70 dB

Stereo :  67 dB

Frequency Response:  20 Hz to 15 kHz ±0,5 dB

Total Harmonic Distortion (1 kHz)

Mono :  less than 0,15%

Stereo :  less than 0,20%

Capture ratio:  1,2 dB

Alternate Channel Selectivity:  better than 90 dB

Spurious Response Ratio:  better than 80 dB

IF Response Ratio:  better than 80 dB

AM Suppression Ratio:  better than 80 dB

Stereo Separation

At 1 kHz :  better than 42 dB

At 10 kHz :  better than 35 dB

Output:  1,5 VRMS

Dimensions (W x H x D):  483 x 133 x 89 mm (19" x 5,25" x 3,5")

Weight:  6,8 kg (15 lbs)

SAE 2200 power amplifier

 

Stereo Power Amplifier

The new SAE2200 Power Amplifier achieves the ultimate. It combines performance and value with aesthetic balance and beauty. Delivering 100 watts rms/channel from 20 Hz to 20 kHz at less than 0,05% Total Harmonic Distortion, the 2200 shares the SAE engineering heritage which includes fully complementary circuitry, high slew rate and low transient distortion. The 2200 package also includes a 15 LED/channel power display which instantly indicates the amount of power being delivered to your speakers, and because of the quality of material and components that go into every SAE, the 200 offers a Free transferable 5 year Service Contract.

 

Fully Complementary Circuitry

The 2200 is completely balenced from input to output utilizing full complementary dual-differential inputs, full complementary drivers and full complementary output stages. This design approach offers inherently low steady-state or transient distortion while assuring accurate reproduction of complex musical waveforms.

 

LED Power Display

This display can instantly inform you of the power output to your speakers, channel imbalance and other information pertinent to the proper performance of your system. Utilizing 15 light Emitting Diodes per channel the amplifier's average power (peak responding) is constantly displayed from 20 mW to full rated power. Amplifier overload is also indicated. The circuit is analog in nature and displays power output in 3 dB increments over its full range, making it the most accurate indicator of its type available in the industry today.

 


Amplifier Protection

Three means of circuit protection are included in the 2200;

-A VI limiter which senses load impedance below 2 Ω  without being affected by reactive loads (i.e. electrostatic speakers) which are rated at 4 Ω  or greater

-A thermal cutout device shuts down the amplifier should the heatsink reach an abnormal high temperature

-An AC line fuse for overall protection

 

Loudspeaker Protection

Should subsonic pulses or ±DC Voltages, which could damage your speakers, appear at the amplifiers outputs, a relay circuit will automatically disconnect the speakers from the amplifier. The circuit is also used during turn-on/off to prevent annoying transients. This relay circuit incorporates many features unique to SAE products, the most important of which alleviates high frequency distortion developed by the relay due to "contact diode effect"

 

Plug-in Board Design

Easily accessible input-drive, relay-power, and meter boards make the 2200 consistent in performance from one amplifier to another in production, and simple to service.

 

Monocoque Construction

Utilizing technology developed in our other amplifier designs, the 2200 mechanical package is constructed in the form of a box, offering structural rigidity and integrity, plus high strength to weight coefficient,

 

Premium materials

Only the finest materials have been used in the construction of the 2200. among the components used you will 5% carbon deposit resistors throughout, military grade glass-epoxy circuit boards and high-grain iron-ore laminations in the transformer. These efforts to use quality materials throughout insures that the 2200 will deliver superior performance and reliability in any application.

 

Precision Construction

No effort has been spared in taking these raw materials to manufacture the highest grade audio components available. It was because of this goal that our 36,000 sq,ft, primary production facility was built. This plant was designed exclusively for the manufacture and assembly of audio components. Further, critical parts unique to SAE products, such as metal work, toroid inductors and circuit boards are produced at our facilities. As a testimonial to SAE thoroughness, our metal shop fabricates all parts with a tolerance of 0,005 in (,013 cm) for proper fit. All front panels are hand brushed for proper aesthetic appearance, and all aluminum parts are mil-spec anodized for long life and easy upkeep. This attention to detail is the hallmark of SAE Components.

 


Specifications

RMS Continuous Power Output per Channel (20 Hz - 20 kHz, both channels driven into 4 or 8 Ω ):  100 Watts at 0,05% T.H.D.

Total Harmonic Distortion (from 20 Hz to 20 kHz at 250 mW to rated power into 4 or 8 Ω ):  0,05% max

Intermodulation Distortion:  0,05% max.

Frequency Response at Rated Power:  20 Hz - 20 kHz ±0,25 dB

Noise:  Greater Than 100 dB below rated power

Transient Response of Any Square Wave:  2,5 microseconds rise and fall time

Slew Rate:  40 Volts/microsecond

Stability:  Unconditionally stable with any type of load or no load including full range electrostatic loudspeakers

Damping Factor:  150 Min (100 Hz)

Input Sensitivity:  1,5 Volts RMS

Input Impedance:  50 k Ω

Overload Protection:

Low impedance electronic-sensing circuit limits with output current below 2 Ω  without limiting with 4 Ω  or higher (or reactive Loads)

Thermal sensing of inadequate ventilation.

Loudspeaker Protection:

Relay circuit protects loudspeakers from low frequency oscillations and plus or minus DC output.

Five second turn on disturbances

Power Requirements:  110 - 120 V, 50 /60 Hz. 75 Watts at idling to 600 Watts at rated poer

Dimensions (W x H x D):  483 x 133 x 21,6 mm (19" x 5,25" x 8,5")

Weight:  11,4 kg (25 pounds) shipping