Sanyo's new top-of-the-line cassette deck featuring microprocessor control and 3-head design.
Two motors, a servo-controlled DC motor to drive the capstan, and a second DC governor motor for the reel drive, provide high torque with extremely low wow and flutter. The integrated Sendust Alloy record and playback heads with metal tape compatibility deliver exceptional frequency response and Signal-to-Noise Ratio specifications. Outstanding electrical and mechanical performance in addition to a host of user-oriented features make the RD5372 one of the most sophisticated pieces of cassette recording equipment available
Sendust alloy Record and Playback Heads
Surpassing the capabilities of other head materials, Sendust Alloy record and playback heads are responsible for much of the exceptional performance of the RD5372 and RD5370. the single unit housing both heads provides instantaneous monitoring plus permanent alignment of record and playback heads.
MPX Filter Defeat
This defeat switch permits disengaging the 19 kHz multiplex filter for extended high frequency response when recording live or from a disc.
4-Position Tape Select
Provides optimum bias and EQ for all tape formulations: metal, CrO₂, FeCr and Normal
Integrated Record and Playback Head
Sanyo engineers had to overcome two problems to permit cassette tape monitoring: fitting three heads into the standard cassette format designed to accept only two, and maintaining exact alignment of the record and playback head gaps without the constant adjustment required of some 3-head cassette decks. Sanyo engineers met this challenge with an integrated head design incorporating separate record and playback heads into a single housing. Since both heads are permanently mounted in the same shell, they can never become misaligned, assuring the best possible high frequency performance.
Dual process Dolby Noise reduction
The Dolby noise reduction process has become accepted as the standard for reducing tape his inherent in the recording process. Two-head cassette decks utilize a single Dolby encode/decode circuit for the both record and playback. The RD5372 (and RD5370) 3-head decks contain dual Dolby circuits to encode the recording and simultaneously decode the monitor playback
Microprocessor Logic Control
The Sanyo microprocessor is a tiny digital computer, etched onto a single silicon chip. It executes programmed instructions, sensing the status of switches, controlling solenoids, and monitoring tape motion. This tiny electronic "brain" provides the logic to prevent tape damage, and controls other automatic functions in the RD 5372 (and RD5370)
Specifications
Type: single compact cassette deck, 3-head design
System: 4-track, 2-channel stereo
Tape Speed: 4,8 cm/s
Heads: One Sendust Alloy Record and Playback Heads, 1 x erase
Motor: PLL DC motor one for x reel, and capstan
Tape Type: Normal, FeCr, CrO2, Metal
Noise Reduction: Dolby NR
Frequency Response(±3 dB): (CrO2 tape): 30 Hz to 18,000 Hz (Metal tape): 30 Hz to 19,000 Hz
Signal to Noise Ratio: 64 dB
Wow and Flutter: 0.04% WRMS
Total Harmonic Distortion: 1.5%
Inputs:
Line : 100 mV
Mic : 0.26 mV
Output Line : 1 V
Nessun commento:
Posta un commento