The Model 2000
Stereo pre-amplifier offers excellent specifications, outstanding sonic
performance and a unique "Ambience Circuit" designed to retrieve
out-of-phase signals while using the 2000 in a stereo mode. Prior to this time
one had to add another amplifier and an additional set of speakers to utilize
such a system, but this is not true of the ambience system in the 2000. When
listening to a record played through the 2000 with the ambience circuit on, you
will hear instruments that would not be audible on our preamps. The music is on
the record out of phase and the 2000 corrects that problem
"In
measurements made at CBS, the Model 2000 proved itself a strong performer. In
neither channel did output clipping occur at less than 12,2 volts, whether
driven singly or together. At an output level of 2 volts (more than enough for
full output from most power amps), harmonic distortion was less than 0,02% in
all cases - well below Phase Linear's 0,1% spec. And if we ignore as inaudible
all harmonics above 20 kHz, harmonic distortion is no more than 0,0066%"
"The Model 2000
is as super in the listening as it is smooth in the handling. Once one has
become used to the controls, they are convenient to operate and satisfying to
touch. The extra flexibility in the tone controls (the separate knobs for each
channel, as well as the variable turnover points) delivers worthwhile
options."
Specifications
Total Harmonic
Distortion: Basically so low it is
unmeasurable. Guaranteed less than 0,1% at rated output with 1 HF measurement.
Frequency
Response: Phono ±0.5 dB of RIAA Standard
Input
Sensitivity:
High level input :
40 K
Low level input : 47
K, 290 pf
Hum and Noise: 20 Hz - 20,000 Hz (inputs shorted)
High level : 88 dB
belov 2 V
Low level : 74 dB a
10 mV input
Ambience
Signal: (L-R) =L & (R-L)=R
Volume Control
Tracking: Less than 1 dB Tracking error
Gain:
Low level (Phono) to
pre-amp output : 56 dB at 1 kHz
Phono to Tape Output
: 41 dB at 1 kHz
High Level to
Pre-amp output : 15 dB at 1 kHz
Maximum Output
Levels: Rated at 2 V : maximum 10 volts
will source a 5 kohm load
Bass:
Turnover frequency
50 Hz : ±11 dB at 20 Hz
Turnover frequency
150 Hz : ±13 dB at 20 Hz
Treble:
Turnover frequency 5
kHz : ±10 dB at 20 kHz
Turnover frequency 2
kHz : ±14 dB at 20 kHz
Dimensions: 5½" (H) x 19" x 6" (D)
Weight: 15 lb