Sanyo RD-4300 cassette deck

Stereo Cassette Tape Deck

The perfect stereo cassette tape deck for audio perfectionists. This brand new Sanyo model contains Dolby Noise (Reduction) which almost completely eliminates annoying huma and hissing sounds that heretofore have been an unavoidable part of stereo cassette recording and playback. This advanced unit also has a tape select switch for nominal or high quality chrome tapes. Monitoring while recording is also possible and a cue control and full automatic shut off are built in. At the end of a recording a special memory counter returns the tape to the exact beginning of the freshy recorded material.

Other outstanding features include a pause button, output level control for lineout level, DIN connector and two large VU meters a panel that automatically rises up from the unit at the touch of a button. The Signal-to-Noise Ratio of model RD4300 with the Dolby switch on is 58 dB and the amazingly flat frequency response when a chrome tape is used is 20 to 18,000 Hz. An outstanding stereo tape deck for audio enthusiasts who refuse to settle for less than the best.

 

Features

Dolby noise Reduction

A simple comparison of sounds with the Dolby function switch on and then off clearly shows the value of this noise reduction circuit. Tape hissing and other irritating sounds and humming are almost totally suppressed.

Convenient cueing control, Auto Stop

Finding recorded sections of the tape during fast forward and rewind has been greatly facilitated with a built-in cueing device. There is also a full automatic shut off system that turns off the mechanism at the end of the tape during playback, recording, rewind or fast forward.

Tape select switch for ordinary and chrome tapes

This unit takes both chromium dioxide and ordinary cassette tapes. The wider frequency response of chrome tapes is rated at 20 to 18,000 Hz. A tape select switch is provided for differentiating between the two types.

Excellent sound characteristics

Wow and flutter of this model is 0,1% RMS, and the Signal-to-Noise Ratio when the Dolby switch is on is rated at 58 dB

Two large VU meters

For precision recording and playback two large VU meters are supplied. These meters are built into a special panel that tilts up automatically from the unit at the touch of a button.

Other

Other features include a pause button, separate record/play controls, two microphone inputs, a double eject system that allows you to check the amount of tape left without disturbing the playback or recording and a detachable plate for easy head-cleaning.

 

Specifications

Recording System:  AC bias, 1/4 track stereo

Erasing System:  AC erase

Tape:  Chromium dioxide tape or ordinary cassette tape

Tape Speed:  1-7/8 ips (4,75 cm/sec.)

Recording Time:  60 min. (double-track C-60 tape)

Fast Forward and Rewind Time:  70 sec.

Wow and Flutter:  0,1% RMS

Frequency Response:

Chrome Tape :  20 - 18,000 Hz

Ordinary Tape :  20 - 16,000 Hz

Signal-to-Noise Ratio

Dolby ON :  58 dB

Dolby OFF :  50 dB

Inputs Impedance

MIC :  20 k Ω

AUX :  500 k Ω

DIN :  10 k Ω

Output Impedance

Headphone :  10 k Ω

Line Out :  2 k Ω

DIN :  2 k Ω

Semiconductors:  30 Transistors (includes 2 x FET), 21 Diodes

Power Requirements:  AC 120,220,240 V 50/60 Hz

Dimensions (W x H x D):  440 x 120 x 242 mm (17-1/2" x 4-3/4" x 9-1/2")

Weight:  5,7 kg (12,6 lbs)