Stereo Integrated Amplifier
Fifteen big Watts per channel of honest-to-goodness high fidelity sound from a 2-stage differential SEEP-OCL integrated amplifier an incredibly compact 7,1 cm high by 21 cm wide. Yet, the A30 has plenty of room to accommodate up to 4 external components including tape, deck, tuner and record turntable.
Power output has been boosted by use of a new extra-stable power transformer with independent coils for power and preamplifier sections, and enlarged heat sinks aid in efficient heat dissipation.
For low noise and dynamic performance from high quality MM phono cartridges, the improved phono equalizer IC has boosted Signal-to-Noise Ratio to an excellent 82 dB, with very low 0,005% distortion at 1 kHz. RIAA equalization is a remarkably precise ±0,2 dB throughout the 20 to 20,000 Hz frequency range. For well-balanced listening at low output volumes a switchable loudness compensation circuit is provided.
Plus features:
5-LED logarithmic peak output indicator [0,1 - 40 watts]
AUX component terminals
Stereo headphone jack
Power On LED indicator
Bass, treble, balance controls
Quick one-touch speaker connection terminals
Rack handles included
Specifications
Type: Stereo integrated amplifier
Semiconductors: 5 ICs; 5 Transistors; 12 Diodes, 6 LEDs
Power Amp Section
Effective Output Power: 20 W + 20 W (8 Ω ) U model
15 Watts per channel , Min. RMS at 8 Ω , from 20 Hz - 20 kHz, with no more than 1% T.H.D.
Tdh : 0,1% (1 kHz, 5 W + 5 W) U model
Total Harmonic Distortion from 20 to 20 kHz at 250 mW to 15 W power at 8 Ω , 1 % Max
Output Bandwidth: 10 Hz to 20,000 Hz (less than1%)both channel driven, 8 Ω
Frequency Response: 20 to 20,000 Hz
Pre-Amp Section
Signal-to-Noise Ratio (IHF A curve, short circuit, Weighted):
Phono : better than 76 dB
Tuner, Aux : better than 90 dB
Tone Controls
Bass : ±10 dB at 100 Hz
Treble : ±8 dB at 10 kHz
Loudness:
6,5 dB at 100 Hz (±1,5 dB)
3,5 dB at 10 kHz (±1,5 dB)
RIAA Deviation: ±0,2 dB (20 Hz - 20,000 Hz)
Channel Separation: better than 40 dB
Phono Overload Level: better than 100 mV (MM, at 1 kHz)
Channel Balance: less than 3 dB
Residual Noise: less than 2 mV
Input Sensitivity/Impedance:
Phono : 2,5 mV/47 k Ω
Tuner : 150 mV/47 k Ω
Aux : 150 mV/47 k Ω
Tape : 150 mV/47 k Ω
Output Level/Impedance:
Tape : 120 mV/47 k Ω
Headphones Load Impedance : 8 to 16 Ω
Speakers Impedance : 8 to 16 Ω
Power Requirements: AC 110 / 220 / 240 V, 50/60 Hz
Power Consumption: 40 W
Dimensions (W x H x D): 210 x 71 x 200 mm (8-1/4" x 2-3/4" x 7-7/8")
Weight: 3,15 kg (6,9 lbs)
Nessun commento:
Posta un commento