Designed to
meet the demand for a high-quality single record playing unit at moderate cost,
this unit incorporates a number of special features including a cue and pause
control, calibrated fine stylus force
adjustment, pickup arm bias compensation and a large turntable. On completion
of playing a record the pickup arm automatically rises, returns to its rest and
the motor switches off.
The Garrard
SP25 MkII is a 4-speed single record playing unit incorporating an improved
tubular aluminium pickup arm with a resiliently mounted counterbalance weight
and a calibrated dial to set stylus force easily. It is elegantly styled, and
has many features associated with more costly equipment, such as a cueing
device to lower and raise the pickup gently, a patented pickup arm bias
compensator and a lightweight plug-in pickup shell which will accommodate a
wide range of cartridges. In addition it has a large, loaded turntable driven
by a magnetically screened resiliently mounted Garrard Laboratory Series
electro motor, through a retractible rubber wheel. The pickup returns to its
rest automatically after playing a record and unit switches off.
Pickup Arm
Facilities
Stylus Force
Adjustment
Integral
Stylus Force Calibration
Bias
Compensator
Cue and
pause
Cabinet
Installation
The SP25
MkII requires minimum cabinet space 15-3/8" long by 13-1/8" wide with
clearance for the pickup arm counterbalance weight to overhang 1-1/8" max.
Behind the unit plate and 1-13/16" max. to the side of the unit plate,
according to the weight of the pickup cartridge fitted. The unit requires 3-1/2" space above and
2-7/8" below the top of the motor board.
Voltage and
Frequency
The Garrard
SP25 MkII has a low voltage range motor suitable for 100/130 volts AC or a dual
voltage range motor , suitable for either 100/130 or 200/250 volts AC. These units are suitable for various power
supply frequencies depending on the motor pulley fitted. The pulleys are
coloured for easy indentification: Nickel for 50 Hz and Brass for 60 Hz.
Specifications
Type: Single
record player
Motor: 4-pole induction
Speeds: Four speeds 78, 45, 33-1/3 and 16-2/3
Plater: 267 mm (10 ½")
Pickup Arm:
Material: Tubular Aluminium
Design: Weight counterbalanced; Slide or Plug-in
Pickup Head
Voltage
Range: High and Low
Finish: Polychromatic Dark Green and Silver
Dimensions: 383 mm (15-1/16") wide by 317 mm
(12-1/2") front to rear by 73 mm (2-7/8") above and 70 mm
(2-3/4") below lower edge of unit plate.
Hallo! I'd like to know if is possible to find a shell for the arm of this turntable.
RispondiEliminaThank you for your answer.
Giacomo Campodonico - Italy
i have need a diamond needle for its pickup
RispondiEliminaHi, can you tell me which stylus I should buy for one of these?
RispondiEliminaI have one withou arm that I want to sell..
RispondiElimina