What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Technics SU-C700

 Stereo Integrated Amplifier SU-C700

JENO Engine (Jitter Elimination and Noise-shaping Optimization)
Just like the R1, the SU-C700 is a fully-digital amplifier and delivers high-resolution digital signals without any distortion being introduced between the input stage and output to the speakers. Technics has developed an original jitter-reduction circuit, avoiding the sound quality degradation due to jitter common to conventional digital amps. It uses a clock generator for the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter to suppress jitter in the high-frequency range.

LAPC (Load Adaptive Phase Calibration)
Technics has developed a speaker impedance optimization algorithm, using digital signal processing to flatten both the amplitude and phase-frequency response to make the most of your speakers. The result is a sound with better focus, spaciousness and definition.

High-speed Silent Linear Power Supply
Using a large-current Schottky-barrier diode, a rectifier circuit with electrolytic capacitors, and a stabilized power supply circuit, the SU-C700 ensures ample power supply at all times, even when dynamic music demands high current. 
 Battery Driven Clock Generator
Technics used battery power for low-noise applications in analog amplifiers in the past: here, this same technology is used to improve digital clock precision, enhancing the definition of the sound.

Various Inputs
The SU-C700 supports a wide range of inputs, such as SPDIF, Analog and Phono, as well as USB-DAC for connection of a PC. The digital input terminal supports coaxial 192-kHz/24-bit PCM and optical 96-kHz/24-bit. The USB DAC input terminal supports 192-kHz 32-bit PCM and 2.8-MHz/5.6-MHz DSD native playback (analog output) and asynchronous transmission. The SU-C700 converts analog signals to high-precision 192-kHz/24-bit PCM signals using the A/D converter. The full-digital system achieves high-purity reproduction from any content. 
Specifications
Accurate Digital TechnologyJENO Engine
Technics Definitive DesignHigh Rigidity aluminium cabinet  White LED illuminated large level meter  Symmetric structure
Output Power:
45 W + 45 W (1 kHz, T.H.D. 0.3%, 8 Ω, 20 kHz LPF)
70 W + 70 W (1 kHz, T.H.D. 0.5%, 4 Ω, 20 kHz LPF)
Input Sensitivity /Impedance:
Line :  200 mV / 22 kΩ,
Phono (MM) :  2.5 mV/47 kΩ
Frequency Response:
Line :  20 Hz - 80 kHz (-3 dB, 8 Ω),
Phono(MM):  20 Hz - 20 kHz (RIAA DEVIATION ±1 dB, 8 Ω),
Coaxial 1/2/3 :  20 Hz - 90 kHz (-3 dB, 8 Ω)
Load Impedance4-16 Ω
Analog Input Terminal:  1 x Line; 1 x Phono
Digital Input Terminal:  3 x Coaxial Digital, Optical Digital, USB-B
USB-DAC (USB-B):
USB Audio Class SpecificationUSB Audio Class 2.0, Asynchronous mode
Support Codec
DSCYes (2.8224 MHz, 5.6448 MHz)
PCMYes (32, 44.1, 48, 88.2, 96, 176.4, 192 kHz / 16, 24, 32 bit)
Headphone Output:  Yes
System PortSystem Control Input/Output (Φ3.5 mm Jack)
Power SupplyAC 120 /240 V, 50/60 Hz
Power Consumption:  73 W
Dimensions (W x H x D)340 x 132 x 325 mm (13-3/8" x 5-7/32" x 12-13/16")
Weight:  Approx. 8.3 kg (18.3 lbs)

AccessoriesRemote control

Nessun commento:

Posta un commento