What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Sony TA-535R amplifier

Stereo Interated Amplifier System : 

Pre Section :  Low-noise, Equalizer amplifier

Power Section :  Pure-complementary SEPP OCL Power amp with all stages directly coupled

 


Specifications

Continuous Power Output RMS both channels driven

DIN 1 kHz  :  110 W + 110 W (4 ); 90 W + 90 W (8 )

20 Hz - 20 kHz :  80 W + 80 W (4 ); 75 W + 75 W (8 )

Input Sensitivity/Impedance

Phono MM :  2,0 mV/50 k

Phono MC :  0,25 mV/100

Tuner, CD, Aux, DAT, Tape 1, 2 :  150 mV/50 k

Output Load /Impedance

Rec Out:  150 mV/1 k

Speakers :  4 - 16

Headphones :  accepts low and high impedance

Total Harmonic Distortion:  less than 0,008% at 10 W output

Intermodulation Distortion (60 Hz : 7 kHz = 4 : 1):  less than 0,008% at 10 W output

Frequency Response:

Phono :  RIAA equalization curve ±0,5 dB

Tuner, CD, Aux. DAT/Tape 1, Tape 2 :  7 Hz - 100 kHz (+0 -3 dB)

Residual Noise:  less than 170 µV (Network A)

Damping Factor :  70 (8 , 1 kHz)

Signal-to-Noise Ratio :

Phono MM :  94 dB

Phono MC :  76 dB

Tuner, CD, Aux, DAT, Tape 1, 2 :  103 dB

Tone Controls

Bass :  ±7 dB at 100 Hz (300 Hz turnover frequency)

Treble ;  ± 6 dB at 10 kHz (5 kHz turnover frequency)

Power Requirements:  220 V - 230 V  AC , 50/60 Hz

Power Consumption:  230 W

Dimensions (W x H x D):  430 x 150 x 375 mm (17" x 6" x 14-7/8")

Weight:  9,7 kg (21 lb 7 oz)

Nessun commento:

Posta un commento