Fine Performance Makes This One of Our Most Popular Models
This model will undoubtedly be one of most popular models ever thanks to its design emphasis on performance. It has a logic control mechanism to make operation easier and protect tapes, a JVC Metaperm head for top recordings from all tape types including metal, and ANRS/Dolby noise reduction for hidd-free recordings. Whether your system is an economy or top-of-the-line system, the KD-V100 is an excellent adition.
Fel tape mechanism for soft-touch operation
JVC Metaperm head for excellent results with all tape types including metal
ANRS/Dolby noise reduction for clean, clear recordings
6-LED multi-peak indicators, one set per channel
Automatic input selector
Mike jacks
3-digit tape counter
Gear/oil-damped cassette lid
Specification
Type: Stereo cassette deck
Track System: 4-track, 2 channel
Tape Speed: 4,8 cm/s (1-7/8 ips)
Frequency Response (0 dB recording)
Metal Tape : 40 - 11,000 Hz (±3 dB)
CrO₂ Tape : 40 - 8,000 Hz (±3 dB)
Normal Tape : 40 - 8,000 Hz (±3 dB)
Frequency Response (-20 dB recording)
Metal Tape : 40 - 15,000 Hz (±3 dB)
CrO₂ Tape : 40 - 15,000 Hz (±3 dB)
Normal Tape : 40 - 14,000 Hz (±3 dB)
Signal-to-Noise Ratio: 58 dB (S=1 kHz, K3=3%, N=A-weight, Metal tape) Ths S/N is improved by 5 dB at 1 kHz and by 10 dB above 5 kHz with ANRS/Dolby B NR on.
Wow and Flutter: 0,07% (WRMS); 0,20% (DIN 45 500)
Crosstalk: 60 dB (1 kHz)
Harmonic Distortion: K3; 0,5% T.H.D.: 1,0%(Metal tape, 1 kHz 0 dB)
Heads:
Metaperm head for recording/playback
2-GAP ferrite head for erasure
Motor: Electronic governed DC motor
Fast Forward /Rewind Time: 100 sec. C-60 cassette
Input Sensitivity/Impedance
MIC : 0,4 mV (-68 dBV)/ 600 Ω - 10 k Ω
Line Jack : 80 mV/100 k Ω
Output Level/Impedance
Line Output : 300 mV/5 k Ω
Power Requirements: AC 120 V, 220 - 240 V; 50/60 Hz
Power Consumption: 10 W (power On); 0,8W (power Off)
Dimensions (W x H x D) : 435 x 115 x 237 mm
Weight: 3,5 kg (7,7 lbs)
Nessun commento:
Posta un commento