Upper range power output, unusual FM selectivity and sensitivity and the versatility of units costing much, much more - the SX-727 stereo receiver from Pioneer puts together all of these hi-fi virtues and offers the music enthusiast a new high in stereo valve. verSatility is the keynote of this attractively-designed unit. The SX-727 handles up to two tape decks, two turntables, three pairs of speaker system and a microphone. Its sensitive FM section is loaded with the very latest of solid state circuitry - the better to offer distortion free reception. Its direct-coupled power amplifier circuitry means a wide power bandwidth and superb frequency response. And the unit puts out up to 195 watts of music power (at 4 Ω ), more than enough to fill a large room with great sound. Now available at a price that is as surprising as its many features.
Features:
Two tuning meters, a wide linear scale FM -dial
Sensitive FM front-end section
FET equipped FM Muting Circuit
IF section with ceramic filters
FET equipped control amp section
Direct-coupled power amp section
Tape-to-tape duplication
Specifications
Power Amplifier Section
Music power Output (IHF):
195 watts at 4 Ω
122 watts at 8 Ω
Continous Power Output (1 kHz, each channel driven)
69 W/69 W at 4 Ω
48 W/48 W at 8 Ω
Continuous Power Output (1 kHz, both channel driven):
50 W +50 W at 4 Ω
40 W + 40 W at 8 Ω
Power Output in the Range of 20 Hz to 20 kHz (both channels driven): 37 W + 37 W ( 8 Ω , T.H.D. less than 0,5%)
Total Harmonic Distortion
Less than 0,5% (Continuous power output)
Less than 0,03% (8 Ω , 24 W/24 W power output)
Intermodulation DIstortion
Less than 0,5% (Continuous power output)
Less than 0,03% (8 Ω , 24 W/24 W power output)
Power Bandwidth (IHF): 10 Hz to 60 kHz (8 Ω , T.H.D. less than 0,5%)
Frequency Response; 7 Hz to 80 kHz, ±1 dB
Input Sensitivty/Impedance: 500 mV/50 k Ω (1khz, Continuous power output)
Speakers: 4 to 16 Ω
Damping Factor: 40 (8 Ω , 1 kHz)
Preamplifier Section
Output Voltage: 500 mV (Rated output, 4 V Max.)
Total Harmonic Distortion : less than 0,1%
Frequency Response: 10 Hz to 20 kHz ±1 dB
Input Sensitivity/Impedance (1 kHz, for rated output)
Phono 1 Mag : 3 mV/50 k Ω
Phono 2 mag : 3 mV/50 k Ω
Mic : 2,7 mV/50 k Ω
Aux : 200 mV/100 k Ω
Tape Monitor 1, 2 : 200 mV/100 k Ω
Recording Output
Tape Rec 1, 2 : 200 mV (Pin jack)
Tape Rec (DIN) : 35 mV
Controls:
Bass : ±10 dB at 100 Hz
Treble : ±10 dB at 10 kHz
Low Filter : -8 dB / 50 Hz (6 dB/oct.)
High Filter : -9 dB /10 kHz (6 dB/oct.)
Equalization Curve: Phono RIAA standard
Loudness Contour: +10 dB/100 Hz ; +6 dB/10 kHz (with Volume Control set at -40 dB position)
Muting: -20 dB
Hum and Noise (IHF):
Phono : better than 85 dB
Aux : better than 95 dB
FM Tuner Section
Frequency Range: 88 MHz to 108 MHz
Usable Sensitivity (IHF): 1,8 µV
Capture Ratio (IHF): 2,0 dB
Selectivity (IHF): better than 70 dB
Image Rejection: better than 85 dB (98 MHz)
IF Rejection: better than 100 dB (90 MHz)
Spurious Rejection: better than 90 dB (98 MHz)
AM Suppresion: 50 dB
Signal-to-Noise Ratio : 70 dB
Total Harmonic Distortion :
Mono : less than 0,3% (100 % mod.)
Stereo : less than 0,5% (100 % mod.)
Tuning Indication: Signal strength type and Center tuning type
Muting: switchable to On-Off
Stereo Separation: better than 40 dB (1 kHz)
Subcarrier Suppression: better than 50 dB
Antenna Input: 300 Ω (balanced); 75 Ω (unbalanced)
AM Tuner Section
Frequency Range: 525 kHz to 1605 kHz
Usable Sensitivity (IHF): 10 µV
Selectivity (IHF): better than 35 dB
Image Rejection: better than 80 dB (1,000 kHz)
IF Rejection: better than 75 dB
Signal-to-Noise Ratio: better than 50 dB
Antenna: Built-in ferrite loopstick antenna
Miscellaneous
Semiconductors: 4 FETs: 4ic; 56 Transistors; 37 Diodes
Power Requirements: 110, 120, 130, 220, 240 V 50/60 Hz
Power Consumption: 270 W (max.)
AC Outlets: Switched 1, Unswitched 2
Dimensions (W x H x D): 485 x 150 x 390 mm (19-1/16" x 5-7/8" x 15-3/8")
Weight:
Without Package : 14 kg (30 lb 14 oz)
With Package : 17 kg (37 lb 8 oz)
No comments:
Post a Comment