What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Akai X-360 reel-to-reel recorder

Professional Stereo Tape Recorder

The X360 provides you Professional Results in its operation because of these exclusive Akai features:

Magnetic Brake

3-Speed Motor for Capstan Drive

Cross-Fzield Head

Automatic Volume Control (Comput-O-Matic)

Automatic Dust Minder

Automatic Continuous Reverse (Reverse-O-Matic)

Sensing Tape Reverse

4-track stereo/monaural recording/playback

4 speeds; 15; 7-1/2; 3-3/4 and 1-7/8 ips

3 Motors - Hysteresis synchronous 3-speed motor for capstan drive. Two G-pole eddy current out-rotor motors for supply and take up reel drive

4 Heads - Erase; Playback; Record and Biass heads

50 W Solid state amplifier

Shield type head for high Signal-to-Noise Ratio

Tape shifter in fast forward and rewind operation

Electrical track selection

Automatic Stop, Automatic Shut-off

Automatic pinch wheel release

100 KC biased for recording of FM multiplex

4-digit index counter with reset button

Bass and treble controls

VU meters, Tape cleaner

Stereo headphone jack

DIN jack (with selector for High/Low input

AC outlet

Finely oil-finished wooden cabinet

Vertical and horizontal operation

 


Specifications

Tape Speed:  1-7/8; 3-3/4; 7-1/2; 15 ips

Wow and Flutter

7-1/2 ips :  less than 0,04% RMS

3-3/4 ips :  less than 0,07% RMS

1-7/8 ips :  less than 0,16% RMS

Frequency Response:  30 to 18,000 ps at 3-3/4 ips

Distortion:  within 1,5% 1,000 cps  0VU at 7-1/2 ips

Signal-to-Noise Ratio:  better than 50 dB

Input Level:

Microphone :  more than 0,5 mV

Line :  more than 50 mV

DIN :  more than 5 mV ( LOW), 50 mV (high)

Power Output: 

20 W maximum per each channel at Undistorted Power, total 40 W

25 W maximum per each channel at Music Power , total 50 W

Equalization:  Correct equalization for playback of tapes recorded to the NARTO curve

Recording Bias Frequency:  100 KC

Recording Level Indicator:  VU meter x 2

Recording System:  4-track stereo/monaural, crossfield bias system

Fast Forward and Rewind Time:  75 sec using 1,200 feet tape at 50 cycles; 60 sec at 60 cycles

Head:  4 heads for Erase, Playback and record and bias

Motor: 3 motors

For capstan drive - Hysteresis synchronous 3-speed motor

For supply and take-up reel drive - Two 6-pole eddy current out rotor motors

Speaker:  2 x 5" speaker

Transistors:  60

Power Requirements:  AC 100 - 240 V 50/60 Hz

Power Consumption:  70 - 200 VA

Dimensions (W x H x D): 406 x 444 x 254 mm (16" x 17,5" x 10")

Weight:  28 kg (61,6 lbs)


 

Nessun commento:

Posta un commento