Stereo Integrated Amplifier
Features:
Digital-ready power amplifier with excellent low-impedance drive capability
Dynamic Power Output (EIA) 2 x 165 W into 2 ohms
Ultra-short signal paths and circularised linear circuit layout to produce high-quality, high-definition sound especially for the UK market
Type monitor Source Direct position
Super Bass switch
Independent L/R channel volume control
MM/MC phono cartridge selector
Relay operated A/B speaker selectors with protection
Headphone Jack
Specifications
Power Output: 60 watts per channel minimum RMS, both channel driven at 8 Ω from 20 - 20,000 Hz with no more than 0,08% Total Harmonic Distortion.
Maximum Continuous Power Output
DIN, at 4 Ω : 100 W + 100 W
IEC, at 8 Ω : 70 W + 70 W
Total Harmonic Distortion :
20 Hz - 20,000 Hz, 8 Ω : 0,08%
1 kHz, 8 Ω : 0,009%
Intermodulation Distortion: 0,03% at rated power (60 Hz : 7 kHz= 4 : 1)
Frequency Response: 10 Hz to 90 kHz +0 dB -3 dB (IHF)
Damping Factor: 250 (50 Hz input 8 Ω )
Signal-to-Noise Ratio (IHF-A)
Phono (MM) : 78 dB
Phono (MC) : 74 dB
Tape, Tuner, Aux, CD : 106 dB
Input Sensitivity/Impedance:
CD, Aux, Tuner, Tape : 150 mV / 47 k Ω
Phono (MM) : 2,5 mV/47 k Ω
Phono (MC) : 0,2 mV/47 k Ω
Tone Controls
Treble : ±10 dB at 10 kHz
Bass : ±10 dB at 100 Hz
General
Power Requirements: 110, 120, 220 - 240 V 50/60 Hz
Power Consumption: 250 W
Dimensions (W x H x D): 440 x 102 x 345 mm (17-5/16" x 4-1/16" x 13-9/16")
Weight: 8,8 kg (19,0 lbs)
Nessun commento:
Posta un commento